MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com E-MAIL: optosales@micropac.com
3 - 22
66013 DUAL CHANNEL, HERMETICALLY SEALED, HIGH-SPEED
6N134 OPTOCOUPLER
Mii
OPTOELECTRONIC PRODUCTS
DIVISION
Features:
• DSCC Approved 8102801EX
• 5 MHz bandwidth typical
• 1500 Vdc isolation test voltage
• TTL compatible input and output
• High radiation immunity
• Faraday shield to provide high common mode
rejection
Applications:
• Military and space
• High reliability systems
• Voltage level shifting
• Isolated receiver input
• Communication systems
• Medical systems
DESCRIPTION
The 66013 dual channel optocoupler consists of two LED’s optically coupled to two high speed, high gain inverting detector
gates. Maximum isolation can be achieved while providing TTL outputs capable of switching with propagation delays of 55ns
typical. The 66013 is a 16 pin dual-in-line, hermetically sealed package and is available in standard and MIL-PRF-38534
screened versions or tested to customer specifications.
ABSOLUTE MAXIMUM RATINGS
Storage Temperature..........................................................................................................................................-65°C to +150°C
Operating Free-Air Temperature Range ............................................................................................................-55°C to +125°C
Lead Solder Temperature (For 10s, 1/16” [1.6mm] from package)................................................................................... 260°C
Peak Forward Input Current (each channel) .............................................................................................. 40mA (1ms duration)
Average Forward Input Current (each channel)................................................................................................................. 20mA
Input Power Dissipation (each channel)............................................................................................................................ 35mW
Reverse Input Voltage (each channel) .................................................................................................................................... 5V
Supply Voltage.........................................................................................................................................7V(1 minute maximum)
Output Current - IO (each channel) ......................................................................................................................................25mA
Output Power Dissipation (each channel) .........................................................................................................................40mW
Output Voltage - VO (each channel).........................................................................................................................................7V
Total Power Dissipation (both channels)..........................................................................................................................350mW
Package Dimensions Schematic Diagram
PIN 1
2
10
14
15
1
GND
.800±.020 [20.32]
0.120 [3.05]
0.175 [4.45]
ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
0.018 [0.46]
0.100 [2.54]
0.290 [7.37]
0.301 [7.65]
0.011 [0.28]
6
5K
A
A
K
Vo1
Vcc
Vo2 12
MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 487-6918
www.micropac.com E-MAIL: optosales@micropac.com
3 - 23
66013 DUAL CHANNEL, HERMETICALLY SEALED, HIGH SPEED 6N134 OPTOCOUPLER
ELECTRICAL CHARACTERISTICS Ta=-55°C TO AT 125°C UNLESS OTHERWISE SPECIFIED.
PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE
High Level Output Current IOH 5250µAV
CC = 5.5V, VO = 5.5V,
IF = 250µA
1
Low Level Output Voltage VOL 0.35 0.6 V VCC = 5.5V IF = 10mA
IOL(Sinking) = 10mA
1,9
High Level Supply Current (Both Channels) ICCH 18 28 mA VCC = 5.5V, IF = 0
Low Level Supply Current (Both Channels) ICCL 26 36 mA VCC = 5.5V, IF = 20mA
Input Forward Voltage VF1.5 1.75 V IF = 20mA 1
Input Reverse Breakdown Voltage BVR5V
IR = 10µA
Input-Output Insulation Leakage Current II—O 1.0 µA VI—0 = 1500Vdc,
Relative Humidity = 45%
ta = 25°C, t = 5s
2
Propagation Delay Time To High Output Level tPLH 45 100 ns RL = 510Ω, CL = 50pF
If = 13mA, Ta = 25°C
5
Propagation Delay Time To Low Output Level tPHL 55 100 ns RL = 510Ω, CL = 50pF
If = 13mA, Ta = 25°C
6
Delay Time To Low to High Output Level (90%) tLH 90 ns RL = 510Ω, CL = 50pF
IF = 13mA, Ta = 25°C
Delay Time To High to Low Output Level (90%) tHL 40 ns RL = 510Ω, CL = 50pF
If = 13mA, Ta = 25°C
TYPICAL CHARACTERISTICS TA = 25°C, VCC = 5V EACH CHANNEL
PARAMETER SYMBOL MIN TYP MAX UNITS TEST CONDITIONS NOTE
Input Capacitance CIN 60 pF VF = 0, f = MHz 1
Input Diode Temperature Coefficient ∆vF∆TA-1.9 mV/°CIF = 20mA 1
Resistance (Input-Output) RI-0 1012 ΩVI—O = 500V 3
Capacitance (Input-Output) CI-O 1.7 pF f = 1MHz 3
Input-Input Insulation Leakage Current II-I 0.5 nA Relative Humidity = 45%
VI-I = 500V, t = 5s
4
Resistance (Input-Input) RI-I 1012 ΩVI-I = 500V 4
Capacitance (Input-Input) CI-I 0.80 pF f = 1MHz 4
Output Rise-Fall Time (10-90%) tf, tf35 90 ns RL = 510Ω, CL = 50pF
IF = 13mA
Common Mode Transient Immunity at High
Output Level
CMH1000 10000 V/µsV
CM = 10V (peak),
VO (min) = 2V,
RL = 510Ω, IF = OmA
7
Common Mode Transient Immunity at Low
Output Level
CML1000 10000 V/µsV
CM = 10V (peak),
VO (max) = 0.8V,
RL = 510Ω, IF = 10mA
8
NOTES:
1. Each channel
2. Measured between pins 1 through 8 shorted together and pins 9 through 16 shorted together.
3. Measured between pins 9 and 10 or 11 and 12 shorted together, and pins 9 through 16 shorted together.
4. Measured between pins 9 and 10 shorted together, and pins 11 and 12 shorted together.
5. The tplh propagation delay is measured from the 6.5mA point on the trailing edge of the input pulse to the 1.5V point on the trailing edge of the output pulse.
6. The tphl propagation delay is measured from the 6.5mA point on the leading edge of the input pulse to the 1.5V point on the leading edge of the output pulse.
7. CMh is the max. tolerable common mode transient to assure that the output will remain in a high logic state (i.e. Vo >2.0V).
8. CMl is the max. tolerable common mode transient to assure that the output will remain in a low logic state (i.e. Vo < 0.8V).
9. It is essential that a bypass capacitor (.01 to 0.1µF ceramic) be connected from pin 10 to pin 15.
RECOMMENDED OPERATING CONDITIONS:
PARAMETER SYMBOL MIN MAX UNITS
Input Current, Low Level Each Channel IFL 0250
µA
Input Current, High Level Each Channel IFH 12.5 20 mA
Supply Voltage VC4.5 5.5 V
SELECTION GUIDE
PART NUMBER PART DESCRIPTION
66013-000 Dual Channel Optocoupler with 100% device screening
66013-001 DSCC Dwg 8102801EX Dual Channel Optocoupler
66013-002 Dual Channel Optocoupler, Commercial, tested over full military temperature range (-55°C to +125°C)
66013-003 Dual Channel Optocoupler, Commercial (0° to 70°C)
