IMP Series Data Sheet 1 - 12 Watt DC-DC Converters Input voltage range up to 72 VDC 1, 2 or 3 outputs up to 30 VDC 1500 VDC I/O electric strength test voltage * Wide input range * Short circuit protection * Low cost Model Selection Output 1 Output 2 Output 3 Vo nom Io nom Vo nom Io nom Vo nom Io nom [VDC][mA] [VDC][mA] [VDC][mA] 3.3 1500 3.3 3000 5 200 5 500 5 1000 5 2400 12 84 12 250 12 500 12 1000 15 66 15 200 15 400 15 800 +5 100 -5 100 +5 250 -5 250 +5 500 -5 500 +5 1200 -5 1200 +12 42 -12 42 +12 125 -12 125 12 125 12 125 +12 250 -12 250 +12 500 -12 500 +15 33 -15 33 15 100 15 100 +15 100 -15 100 +15 200 -15 200 +15 400 -15 400 5 250 5 250 5 1500 +12 200 -12 200 5 1500 +15 160 -15 160 1 9 - 36 VDC for IMP 3 series Type Input voltage 4.5 - 5.5 VDC 5 IMP 6-03-7 5 IMP 1-05-7 5 IMP 6-05-7 5 IMP 1-12-7 5 IMP 6-12-7 5 IMP 1-15-7 5 IMP 6-15-7 5 IMP 1-0505-7 5 IMP 6-0505-7 5 IMP 1-1212-7 5 IMP 6-1212-7 5 IMP 1-1515-7 5 IMP 6-1515-7 - Type Input voltage 10 - 36 VDC1 24 IMP 6-03-7 24 IMP 12-03-7 24 IMP 3-05-7 24 IMP 6-05-7 24 IMP 12-05-7 24 IMP 3-12-7 24 IMP 6-12-7 24 IMP 12-12-7 24 IMP 3-15-7 24 IMP 6-15-7 24 IMP 12-15-7 24 IMP 3-0505-7 24 IMP 6-0505-7 24 IMP 12-0505-7 24 IMP 3-1212-7 24 IMP 3-12-12-7 24 IMP 6-1212-7 24 IMP 12-1212-7 24 IMP 3-15-15-7 24 IMP 3-1515-7 24 IMP 6-1515-7 24 IMP 12-1515-7 24 IMP 3-05-05-7 24 IMP 12-051212-7 24 IMP 12-051515-7 Type Input voltage 18 - 72 VDC 48 IMP 6-03-7 48 IMP 12-03-7 48 IMP 3-05-7 48 IMP 6-05-7 48 IMP 12-05-7 48 IMP 3-12-7 48 IMP 6-12-7 48 IMP 12-12-7 48 IMP 3-15-7 48 IMP 6-15-7 48 IMP 12-15-7 48 IMP 3-0505-7 48 IMP 6-0505-7 48 IMP 12-0505-7 48 IMP 3-1212-7 48 IMP 3-12-12-7 48 IMP 6-1212-7 48 IMP 12-1212-7 48 IMP 3-15-15-7 48 IMP 3-1515-7 48 IMP 6-1515-7 48 IMP 12-1515-7 48 IMP 3-05-05-7 48 IMP 12-051212-7 48 IMP 12-051515-7 Model numbers highlighted in yellow or shaded are not recommended for new designs. REV. MAR 24, 2004 Page 1 of 4 Opt. S S S S S S S S S S S S - IMP Series Data Sheet 1 - 12 Watt DC-DC Converters Input Input voltage Reverse voltage protection continuous range, 5 V (IMP 1, IMP 6) continuous range, 24 V (IMP 3) continuous range, 24 V (IMP 6, IMP 12) continuous range, 48 V shunt diode 4.5 - 5.5 VDC 9 - 36 VDC 10 - 36 VDC 18 - 72 VDC Output Output voltage setting accuracy Vi nom, lo nom Minimum load recommended Line regulation Vi min - Vi max , lo nom Load regulation Vi nom, 0 - 100% lo nom, regulated outputs tracking outputs Output voltage switching noise Vi nom , 20 - 100% lo nom , peak-peak, total Efficiency Vi nom , lo nom 2% Vo nom 20% lo nom 1% Vo nom 2% Vo nom max. 6% Vo nom max. 3% Vo nom up to 83% Control and protection Overload protection No-load protection Remote shut down Vi min, full load 125% Pi nom positive logic (floating or high signal = on) Safety and EMC Electric strength test voltage Electromagnetic interference I/O conducted with external filter 1500 VDC class B Environmental Operating ambient temperature Storage temperature Relative humidity MTBF Vi nom , lo nom non operational non condensing MIL-HDBK-217F, N2 -25 to 71C -40 to 100C 95% >3'700'000 h Options Industry standard pinout IMP 1 and IMP 3 S Accessories DIN and chassis mounting bracket REV. MAR 24, 2004 Page 2 of 4 IMP Series Data Sheet 1 - 12 Watt DC-DC Converters Mechanical data Tolerances 0.3 mm (0.012") unless otherwise indicated. IMP 1, IMP 3 European Projection Pin allocation IMP 1 31.8 (1.25") 13 24 12 1 Measuring point of case temperature TC Pin 1 2 10 11 12 13 15 23 24 20.3 (0.8") 15.24 (0.6") 2.54 (0.1") 12 (0.47") 3 (0.12") S09034 Single output unit Vi+ Vi+ Vo- Vo+ Vi- Vi- Dual output unit Vi+ Vi+ COM COM Vo- Vo+ Vi- Vi- o 0.5 (0.02") Industry standard pinout (option S) Pin 2 3 9 10 11 14 15 16 22 23 Single output Vi- Vi- n.c. n.c. n.c. Vo+ n.c. Vo- Vi+ Vi+ REV. MAR 24, 2004 Alternative pinout IMP 3 Pin 1 2 9 10 11 12 13 15 16 20 23 24 Dual output Vi- Vi- COM n.c. Vo- Vo+ n.c. COM Vi+ Vi+ Page 3 of 4 Single output Dual output Double output Vi+ Vi+ Vi+ Vi+ Vi+ Vi+ Go1 COM COM Vo- Vo1 Vo+ Vo- Vo2 Vo+ Go2 SD SD SD Vi- Vi- Vi- Vi- Vi- Vi- IMP Series Data Sheet 1 - 12 Watt DC-DC Converters IMP 6, IMP 12 with single or dual output 5 (0.2") 12 (0.47") 50.8 (2") 5.08 (0.2") S09035 20.32 (0.8") o 1(0.04") COM Vo- 50.8 (2") Vi+ Vi- Vo+ 2 x 10.2 (0.4") Measuring point of case temperature TC IMP 12 with triple output 50.8 (2") 5 (0.2") 12 (0.47") 12.7 (0.5") 3 x 5.08 (0.2") Vo3- COM Vo1+ 50.8 (2") Vi- Vi+ SD 45.72 (1.8") o 1(0.04") S09047 Vo2+ 5 x 10.16 (0.42") Measuring point of case temperature TC NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective divisional president of Power-One, Inc. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. REV. MAR 24, 2004 Page 4 of 4