pH igh-Performance TTL and FAST Delay Modules High Performance 5-Tap TTL Delay Modules Tap Delays (ns) All Taps Part No. Ty! To2 Ty3 T)4 1,5 Tro Tro TTLDLO25 5.0} 100] 150 | 200] 250] 20 2.0 TTLDLO50 10.0 | 20.0 | 300] 400] 500] 20 2.0 TTLDLO75 15.0 | 30.0 | 45.0 | 60.0] 750] 20 2.0 TTLDL100 20.0 | 40.0 | 60.0 | 800] 1000] 20 2.0 TTLDL125 25.0 | 50.0 | 75.0 | 100.0 | 125.0 | 2.0 2.0 TTLDL150 30.0 | 60.0 | 90.0 | 120.0 | 150.0} 2.0 5.0 TTLDL200 40.0 | 80.0 | 120.0 | 160.0 | 200.0] 2.0 5.0 TTLDL250 50.0 | 100.0 | 150.0 | 200.0 | 250.0 | 2.0 5.0 TTLOLSO0 100.0 | 200.0 | 300.0 | 400.0 | 500.0 | 20 9.0 Delay Characteristics measured at Vcc = 5.0V, 25C, with 15 pf load per tap @ 1.5V level. Delay Tolerance + 1.5 ns or 5% whichever is greater. Rise time measured @ 0.8V to 2.0V levels. For minimum input pulse widthcontact factory. Designs with pulse widths of less than 15% of delay are available. High-Performance 5-Tap FAST Delay Modules Tap Delays (ns) All Taps Part No. Ty? Tp2 Ty3 T,4 T,5 Tro Tro FSTDLO25 5.0 10.0 15.0 20.0 25.0 2.0 2.0 FSTDLO50 10.0 20.0 30.0 40.0 50.0 2.0 2.0 FSTDLO75 15.0 30.0 45.0 60.0 75.0 2.0 2.0 FSTDL100 20.0 40.0 60.0 80.0 100.0 2.0 2.0 FSTDL125 25.0 50.0 75.0 100.0 125.0 2.0 2.0 FSTDL150 30.0 60.0 90.0 120.0 150.0 2.0 5.0 FSTDL200 40.0 80.0 120.0 160.0 200.0 2.0 5.0 FSTDL250 50.0 100.0 150.0 200.0 250.0 2.0 5.0 FSTDL500 100.0 200.0 300.0 400.0 500.0 2.0 9.0 Delay Characteristics measured at Vcc = 5.0V, 25C, with 15 pf load per tap @ 1.5V level. Delay Tolerance + 1.5 ns or 5% whichever is greater. Rise time measured @ 0.8V to 2.0V levels. For minimum input pulse widthcontact factory. Designs with pulse widths of less than 15% of delay are available. Vec Td Td3 Td5 (14) (12) (10) (8) a (1) (4) (6) (7) IN Td2 Td4 GND | = ES xo *For delay values of 100 ns or greater, max. height is 0.380 in. 800 MAX 4b Ey > xB * | \ | | i i | T T T F T F i 4 fw WE A | or | | HE TE TH ip 100 nan \ : iH _t i 007 105 _ 500 4 07 022 060 jae 200-21 O12 MAX ~ [a 28 MAX. 2.010 High-performance TTLDL delay modules are designed for slightly less stringent requirements than those satisfied by our STTLDL modules (previously described). Note differences in delay variance over temperature. > Five tap, lumped constant, active series. Available in low profile, .250 inch high military (MX) series for delays up to 100 nscontact factory. > Temperature coefficient + 2 ns or + 2% (whichever is greater) at maximum delay, 0 to 70C. Designed for leading edge timing. Trailing edge timing available. Compatible with Schottky TTL, FAST, low-power Schottky TTL, FACT, ALS, and AS circuits. > Transfer-molded packaging for highest reliability. > Military models with temperature range 55to + 125C and ceramic package IC. Add suffix M to part number. P Military models as above, but with ceramic package IC screened to Mil-Std 883C. Add suffix MX to part number. > Military models as MX above, but with in-house burn-in and thermal shock, add suffix MY. > For delay lines qualified to Mil-D-83532, see page 4. P 10-tap models available, contact factory for details. Notes Only the pins specified in the schematics are : provided with each package. : Pin numbers shown are for reference only and are not necessarily marked on unit. oe Lead material is electro tin plated alloy 42) 01 or solder dipped. : All specifications are subject to change: without : notice. - : Technitrol rm 1952 East Allegheny Avenue, Philadelphia, PA 19134 USA 5 215-426-9105 Fax 215-426-2836