XH CONNECTOR High box type 1 2.5mm pitch/Disconnectable Crimp style connectors Specifications------------------- 5 JS * Current rating: 3A AC, DC (AWG #22) * Voltage rating: 250V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 10m max. After environmental testing/ 20m max. * Insulation resistance: 1,000M min. * Withstanding voltage: 1,000V AC/minute * Applicable wire: AWG #30 to #22 * Applicable PC board thickness: 1.6mm T * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. XH connector high box type, with 17.0mm mounting height and with 5.8mm thickness. Standards ---------------------- * Header for 2.5mm pitch XH connector for use specifically with resin coated ("potted") PC boards * Interchangeability 0 Recognized E60389 1 Certified LR20812 5.75 1.2 0.1 0 14.2 2 0.05 1.6 17 0.9 0.1 0 3.4 min 2.5 0.05 0.05 6.75 Note: 1. The above figure is the figure viewed from the connector mounting side. 2. Tolerances are non-cumulative: 0.05mm for all centers. 3. Hole dimensions differ according to the kind of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should be larger. The dimensions above should serve as a guideline. Contact JST for details. Contact Applicable wire mm2 AWG# Model No. 1.95 SXH-001T-P0.6 SXH-002T-P0.6 2 Insulation O.D. (mm) 0.080.33 2822 0.91.9 0.050.13 3026 0.91.3 Q'ty / reel 8,000 2.4 Material and Finish Phosphor bronze, tin-plated (reflow treatment) RoHS compliance Note: 1. Contact JST if you requier gold-plated contacts or contacts made of brass. 2. Contact JST also if you require shielded wires, thin wires or other special wires. 6.5 Contact SXH-001T-P0.6 Crimping machine Crimp applicator Applicator Dies Crimp applicator with dies MKS-L MK/SXH-001-06 APLMK SXH001-06 *MKS-SC SC/SXH-001-06 APLSC SXH001-06 AP-K2N Contact Applicator Dies Crimp applicator with dies MKS-L MK/SXH-002-06 APLMK SXH002-06 *MKS-SC SC/SXH-002-06 APLSC SXH002-06 Crimping machine Crimp applicator SXH-002T-P0.6 AP-K2N Note: *Strip-crimp applicator 1 XH CONNECTOR High box type Housing Circuits Model No. 2 XHP-2 XHP-3 XHP-4 XHP-5 XHP-6 XHP-7 XHP-8 XHP-9 XHP-10 3 4 7.75 5 6 7 8 4.1 9 5.7 10 A Dimensions (mm) B C Q'ty / bag 2.5 5.7 7.3 1,000 5.0 8.2 9.8 1,000 7.5 10.7 12.3 1,000 10.0 13.2 14.8 1,000 12.5 15.7 17.3 1,000 15.0 18.2 19.8 1,000 17.5 20.7 22.3 1,000 20.0 23.2 24.8 1,000 22.5 25.7 27.3 1,000 Material PA 6, UL94V-0, natural (white) Circuit No.1 mark RoHS compliance 2.5 <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. A B C ex. XHP-2-oo(blank)...natural (white) BK...black R...red E...blue Y...yellow M...green Shrouded header 2.45 2.5 Circuits Model No. 2 BH2B-XH-2 BH3B-XH-2 BH4B-XH-2 BH5B-XH-2 BH6B-XH-2 BH7B-XH-2 BH8B-XH-2 BH9B-XH-2 BH10B-XH-2 5.75 3 4 5 H JST 14.2 6 7 8 9 1.5 10 3.4 3.4 1.5 14.2 6 H JST 1 B 2 500 7.5 12.4 300 10.0 14.9 300 12.5 17.4 250 15.0 19.9 200 17.5 22.4 150 20.0 24.9 150 22.5 27.4 150 <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. A 700 9.9 RoHS compliance This product displays (LF)(SN) on a label. 2 6.75 5.75 2.45 7.4 Post: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: Glass-filled PA 66, UL94V-0, natural (ivory) 7.4 1.6 2.5 5.0 0.64 1.6 0.64 Q'ty / box Material and Finish 1 2.5 Dimensions (mm) A B 2 6.75 BH2B-XH-2-oo(blank)...natural (ivory) R...red C...black E...blue Y...yellow M...green