PAGE . 1
April 22,2011-REV.06
SB220 SERIES
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O utilizing
Flame Retardant Epoxy Molding Compound.
• Exceeds environmental standards of MIL-S-19500/228
• For use in low voltage,high frequency inverters ,free wheeling ,
and polarity protection applications.
• Lead free in comply with EU RoHS 2002/95/EC directives
MECHANICAL DATA
• Case: DO-15 Molded plastic
• Terminals: Axial leads, solderable per MIL-STD-750,Method 2026
• Polarity: Color band denotes cathode end
• Mounting Position: Any
• Weight: 0.015 ounces, 0.4grams
SCHOTTKY BARRIER RECTIFIERS
VOLTAGE 20 to 60 Volts 2.0 Amperes
CURRENT
MAXIMUM RA TINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
NOTES:
1.Pulse Test :300µsec pulse with, 1% Duty Cycle.
2.Thermal resistance junction to lead P.C. B mounted 0.375”(9.5mm) lead length.
PARAMETER SYMBOL SB220 SB230 SB240 SB250 SB260 UNITS
Maximum Recurrent Peak Reverse Voltage V
RRM
20 30 40 50 60 V
Maximum RMS Voltage V
RMS
14 21 28 35 42 V
Maximum DC Blocking Voltage V
DC
20 30 40 50 60 V
Maximum Average Forward Rectified Current
.375"(9.5mm) lead length (See Figure 1) I
F(AV)
2.0 A
Peak Forward Surge Current : 8.3ms single half sine-
wave superimposed on rated load (JEDEC method) I
FSM
50 A
Maximum Forward Voltage at 2.0A V
F
0.50 0.70 V
Maximum DC Reverse Current at T
J
=25
O
C
Rated DC Blocking Voltage T
J
=100
O
CI
R
0.2
20
0.1
20 mA
Typical Thermal Resistance (Note 2) R
θJA
35
O
C / W
Operating Junction and Storag Temperature Range T
J
,T
STG
-55 to +125 -55 to +150
O
C
1.0(25.4)MIN.
0.300(7.6)
0.230(5.8)
0.034(0.86)
0.028(0.71)
0.140(3.6)
0.104(2.6)
1.0(25.4)MIN.