TCLT1005-1 - Vishay Presicion Group

TCLT100. Series

www.vishay.com Vishay Semiconductors

Rev. 2.4, 29-Apr-11 1Document Number: 83515

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Optocoupler, Phototransistor Output,

SOP-4L, Long Mini-Flat Package

DESCRIPTION

The TCLT100. series consists of a phototransistor optically

coupled to a gallium arsenide infrared-emitting diode in a

4-lead SOP4L package.

APPLICATIONS

• Switchmode power supplies

• Computer peripheral interface

• Microprocessor system interface

FEATURES

• SMD low profile 4 lead package

•V

IORM = 1050 V

• CTR flexibility available see order information

• Special construction

• Extra low coupling capacitance

• DC input with transistor output

• Creepage distance > 8 mm

• Compliant to RoHS Directive 2002/95/EC and in

accordance to WEEE 2002/96/EC

Note

** Please see document “Vishay Material Category Policy”:

www.vishay.com/doc?99902

AGENCY APPROVALS

• UL1577, file no. E76222

• CSA (cUL) 22.2 bulletin 5A recognized file no. E-76222

• BSI: BS EN 41003, BS EN 60065 (BS 415), BS EN 60950

(BS 7002), certificate number 7081 and 7402

• DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5

(pending), available with option 1

• FIMKO (SETI): EN 60950

Note

• See the safety standard approval list “Agency Table” for more

detailed information.

Note

• Available only on tape and reel.

17295-5

ORDERING INFORMATION

TCLT100#

PART NUMBER

AGENCY

CERTIFIED/PACKAGE

CTR (%)

5 mA 10 mA 5 mA

UL, cUL, VDE, BSI, FIMKO 50 to 600 63 to 125 100 to 200 160 to 320 50 to 150 100 to 300 80 to 160 130 to 260 200 to 400

SOP-4L TCLT1000 TCLT1002 TCLT1003 TCLT1004 TCLT1005 TCLT1006 TCLT1007 TCLT1008 TCLT1009

10.2 mm

SOP-4L

TCLT100. Series

www.vishay.com Vishay Semiconductors

Rev. 2.4, 29-Apr-11 2Document Number: 83515

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not

implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute

maximum ratings for extended periods of the time can adversely affect reliability.

Note

• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering

evaluation. Typical values are for information only and are not part of the testing requirements.

ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL VALUE UNIT

INPUT

Reverse voltage VR6V

Forward current IF60 mA

Forward surge current tp  10 μs IFSM 1.5 A

Power dissipation Pdiss 100 mW

Junction temperature Tj125 °C

OUTPUT

Collector emitter voltage VCEO 70 V

Emitter collector voltage VECO 7V

Collector current IC50 mA

Collector peak current tp/T = 0.5, tp  10 ms ICM 100 mA

Power dissipation Pdiss 150 mW

Junction temperature Tj125 °C

COUPLER

Isolation test voltage (RMS) VISO 5000 VRMS

Total power dissipation Ptot 250 mW

Operating ambient temperature range Tamb - 55 to + 100 °C

Storage temperature range Tstg - 55 to + 125 °C

Soldering temperature Tsld 260 °C

ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT

INPUT

Forward voltage IF = 50 mA VF1.25 1.6 V

Junction capacitance VR = 0 V, f = 1 MHz Cj50 pF

OUTPUT

Collector emitter voltage IC = 1 mA VCEO 70 V

Emitter collector voltage IE = 100 μA VECO 7V

Collector emitter cut-off current VCE = 20 V, IF = 0 A ICEO 10 100 nA

COUPLER

Collector emitter saturation voltage IF = 10 mA, IC = 1 mA VCEsat 0.3 V

Cut-off frequency VCE = 5 V, IF = 10 mA,

RL = 100 fc110 kHz

Coupling capacitance f = 1 MHz Ck0.3 pF

TCLT100. Series

www.vishay.com Vishay Semiconductors

Rev. 2.4, 29-Apr-11 3Document Number: 83515

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

• According to DIN EN 60747-5-2 (VDE 0884) (see figure 2). This optocoupler is suitable for safe electrical isolation only within the safety

ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits.

Fig. 1 - Derating Diagram Fig. 2 - Test Pulse Diagram for Sample Test according to

DIN EN 60747-5-2 (VDE 0884); IEC60747-5-5

CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT

IC/IF

VCE = 5 V, IF = 5 mA TCLT1000 CTR 50 600 %

VCE = 5 V, IF = 10 mA

TCLT1002 CTR 63 125 %

TCLT1003 CTR 100 200 %

TCLT1004 CTR 160 320 %

VCE = 5 V, IF = 1 mA

TCLT1002 CTR 22 45 %

TCLT1003 CTR 34 70 %

TCLT1004 CTR 56 100 %

VCE = 5 V, IF = 5 mA

TCLT1005 CTR 50 150 %

TCLT1006 CTR 100 300 %

TCLT1007 CTR 80 160 %

TCLT1008 CTR 130 260 %

TCLT1009 CTR 200 400 %

SAFETY AND INSULATION RATED PARAMETERS

PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT

Partial discharge test voltage -

routine test 100 %, ttest = 1 s Vpd 2kV

Partial discharge test voltage -

lot test (sample test)

tTr = 60 s, ttest = 10 s,

(see figure 2)

VIOTM 8kV

Vpd 1.68 kV

Insulation resistance

VIO = 500 V RIO 1012 

VIO = 500 V, Tamb = 100 °C RIO 1011 

VIO = 500 V, Tamb = 150 °C

(construction test only) RIO 109

Forward current Isi 130 mA

Power dissipation Pso 265 mW

Rated impulse voltage VIOTM 8kV

Safety temperature Tsi 150 °C

Clearance distance 8.0 mm

Creepage distance 8.0 mm

Insulation distance (internal) 0.40 mm

0 25 50 75 125

100

150

200

300

TSI - Safety Temperature (°C)

150

94 9182-2

100

250

IR-diode

ISI (mA)

Phototransistor

PSO (mW)

13930

, t2 = 1 s to 10 s

t3, t4 = 1 s

ttest = 10 s

tstres = 12 s

VIOTM

Vpd

VIOWM

VIORM

ttest

tTr = 60 s tstres

t3t4

TCLT100. Series

www.vishay.com Vishay Semiconductors

Rev. 2.4, 29-Apr-11 4Document Number: 83515

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 3 - Test Circuit, Non-Saturated Operation

Fig. 4 - Test Circuit, Saturated Operation

Fig. 5 - Switching Times

SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)

PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT

Delay time VS = 5 V, IC = 2 mA, RL = 100 ,

(see figure 3) td3μs

Rise time VS = 5 V, IC = 2 mA, RL = 100 ,

(see figure 3) tr3μs

Fall time VS = 5 V, IC = 2 mA, RL = 100 ,

(see figure 3) tf4.7 μs

Storage time VS = 5 V, IC = 2 mA, RL = 100 ,

(see figure 3) ts0.3 μs

Turn-on time VS = 5 V, IC = 2 mA, RL = 100 ,

(see figure 3) ton 6μs

Turn-off time VS = 5 V, IC = 2 mA, RL = 100 ,

(see figure 3) toff 5μs

Turn-on time VS = 5 V, IF = 10 mA, RL = 1 k,

(see figure 4) ton 9μs

Turn-off time VS = 5 V, IF = 10 mA, RL = 1 k,

(see figure 4) toff 10 μs

Channel I

Channel II

95 10804

RG = 50 Ω

tp = 50 µs

T= 0.01

+ 5 V

50 Ω100 Ω

IC = 2 mA; adjusted through

input amplitude

Oscilloscope

RL= 1 MΩ

CL= 20 pF

Channel I

Channel II

95 10843

= 50 Ω

= 50 µs

T= 0.01

+ 5 V

50 Ω1 kΩ

= 10 mA

Oscilloscope

≥

20 pF

1 MΩ

≤

tpt

10 %

90 %

100 %

ton

tstf

toff

tpPulse duration

tdDelay time

trRise time

ton (= td + tr) Turn-on time

tsStorage time

tfFall time

toff (= ts + tf) Turn-off time

96 11698

TCLT100. Series

www.vishay.com Vishay Semiconductors

Rev. 2.4, 29-Apr-11 5Document Number: 83515

For technical questions, contact: optocoupleranswers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PACKAGE DIMENSIONS in millimeters

PACKAGE MARKING

22533

7.50 ± 0.20

0.10 ± 0.10

0.70 + 0.30

- 0.40

technical drawings

according to DIN

specications

8.20

10.80

Possible footprint

2.54

0.90

4.10 max.

3.80

2.00

2.30 max.

2.54 nom.

Pin no. 1 identication

0.45 ± 0.1

+ 0.30

- 0.40

10.20

0.20 + 0.10

- 0.05

TCLT1003

V YWW 68

Document Number: 91000 www.vishay.com

Revision: 11-Mar-11 1

Disclaimer

Legal Disclaimer Notice

Vishay

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.