SIL06C Series 5Vin and 12Vin single output DC/DC CONVERTERS C Class Non-isolated 1 NEW Product * * * * 6A current rating Input voltage range: 4.5V - 5.5V or 10.2V - 13.8V Output voltage range: 0.9V - 5.0V Industry leading value * Cost optimised design * Excellent transient response * Output Voltage adjustability * Pathway for future upgrades * Supports silicon voltage migration * Resulting in reduced design-in and qualification time * Designed in reliability: MTBF of >7 million hrs per Telcordia SR-332 The SIL06C series is a new high density open frame non-isolated converter for space sensitive applications. Each model has a wide input range (4.5 - 5.5VDC or 10.2 13.8VDC) and offer a wide 0.9 - 5V output voltage range with a 6A load. An external resistor adjusts the output voltage from its pre-set value of 0.9V to any value up to the 5V maximum. Typical efficiencies for the models are 89% for the 5V input version and 91% for the 12V input version. The SIL06C series offers remote ON/OFF and over-current protection as standard. With full international safety approval including EN60950 and UL/cUL60950, the SIL06C reduces compliance costs and time to market. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25C unless otherwise stated OUTPUT SPECIFICATIONS Voltage adjustability (See Note 7) INPUT SPECIFICATIONS (CONTD.) 5V input models 12V input models 0.9V to 3.3V 0.9V to 5.0V Output setpoint accuracy With 1.0% trim resistors 2.5% Line regulation Low line to high line 0.2% max. Load regulation Full load to min. load 0.5% max. Min./max. load Overshoot (at turn on) 0A/6A 5V input models 12V input models 3.0% max. 1.0% max. Undershoot 100mV max. Ripple and noise 5Hz to 20MHz (See Note 2) Transient response (See Note 1) Deviation See table 75mV 150s recovery to within regulation band 5Vin 12Vin 4.5VDC 9.0VDC Turn OFF threshold 5Vin 12Vin 4.3VDC 7.5VDC GENERAL SPECIFICATIONS Efficiency See Table Switching frequency Fixed 200kHz Approvals and standards (pending) (See Note 4) TUV Product Services IEC60950, UL/cUL60950 Material flammability UL94V-0 Weight 9.3 (0.3oz) MTBF Telcordia SR-332 7,562,142 hours ENVIRONMENTAL SPECIFICATIONS INPUT SPECIFICATIONS Input voltage range 5V input model 12V input model Input current No load Remote OFF Input current (max.) (See Note 9) 5V input model 12V input model 5.1A @ Io max. 1.6A @ Io max. Input reflected ripple (See Note 2) 5V input model 12V input model 52mA (pk-pk) 56mA (pk-pk) Remote ON/OFF Logic compatibility ON OFF Start-up time (See Note 3) Turn ON threshold 4.5 to 5.5VDC 10.2 to 13.8VDC 50mA 5mA Active high >2.4VDC <0.8VDC Power up Remote ON/OFF <20ms <20ms Thermal performance (See Note 8) Operating ambient, temperature Non-operating 0C to +80C -40C to +125C PROTECTION Short-circuit protection Hiccup, non-latching RECOMMENDED SYSTEM CAPACITANCE Input capacitance Output capacitance (See Note 11) (See Note 11) 270F/20m esr max. 680F/10m esr max. International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. E139421 UL60950 file No. E139421 TUV TUV Product Service (EN60950) Certificate No. B0211 19870 205 CB report and certificate to IEC60950 File Name: SIL06C.PDF Rev: 04 Mar 2003 SIL06C Series 5Vin and 12Vin single output DC/DC CONVERTERS C Class Non-isolated 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT POWER (MAX.) INPUT VOLTAGE OVP OUTPUT OUTPUT CURRENT VOLTAGE(12) (MIN.) 20W 4.5-5.5VDC N/A 0.9V - 3.3V 30W 10.2-13.8VDC N/A 0.9V - 5.0V Part Number System with Options NEW Product OUTPUT CURRENT (MAX.) EFFICIENCY (TYP.) LINE LOAD MODEL NUMBER (5) 0A 6A 89% 0.2% 0.5% SIL06C-05SADJ-V 0A 6A 91% 0.2% 0.5% SIL06C-12SADJ-V REGULATION SIL06C-12SADJ-V Mounting Option V = Vertical Mount H = Horizontal Mount Product Family SIL = Single in Line Rated Output Current 06 = 6Amps Number of Outputs SADJ = Single Adjustable Output Performance C = Cost Optimised Input Voltage 05 = 4.5V - 5.5V 12 = 10.2V - 13.8V Output Voltage Adjustment of the SIL06C Series The ultra-wide output voltage trim range offers major advantages to users who select the SIL06C series. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.9V to 5.0V. When the SIL06C series converter leaves the factory the output has been adjusted to the default voltage of 0.9V Notes di/dt = 10A/s, Vin = Nom, Tc = 25C, load change = 0.5 lo max. to 0.75 lo max. and 0.75 lo max. to 0.5 lo max. 2 Measured with external filter. See Application Note 131 for details. 3 Power up is the time from application of DC input to Power Good enabled. Remote ON/OFF is from ON/OFF asserted high to Power Good enabled 4 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 5 The standard unit with the suffix '-V' is for vertical mounting. To order a unit with horizontal mounting, please add the suffix '-H' to the model number, e.g. SIL06C-05SADJ-H. 6 Measured as per recommended set-up. Cin = 270F (20m esr max.). Cout = 680F (10m esr max.). 7 Uses external resistor from trim to output ground. Minimum value 485 for 5V model, 280 for 12V model. See Applications Note 131 for details. 8 Signal line assumed <3m. 9 External input fusing recommended. 10 See Application Note 131 for operation above 50C. 11 See Application Note 131 for more details. 12 These models have a wide trim output. 5Vin has an output of 0.9V to 3.3V and 12 Vin has an output of 0.9V to 5V. An external resistor adjusts the output voltage. Ripple and Noise Specification 1 Output Voltage Pk - Pk RMS 5V input models 0.9 to 2.5V 3.3V 30mV 40mV 15mV 15mV 12V input models 0.9 to 2.5V 3.3 to 5V 40mV 50mV 20mV 20mV Model CAUTION: High internal temperatures. Ensure that unit is not user accessible. File Name: SIL06C.PDF Rev: 04 Mar 2003 SIL06C Series 5Vin and 12Vin single output DC/DC CONVERTERS C Class Non-isolated 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product PIN 1 1 Vout 2 Trim 3 Ground 4 Power Good 5 Remote ON/OFF 6 Vin 7 Mechanical support 8 Mechanical support 9 Mechanical support on horizontal version only 0.610 (15.49) 0.527 (13.38) Mechanical Support Pin Figure 1: Mechanical Drawing - Horizontal Mount Version All dimensions in inches (mm) General tolerance 0.01in (0.25mm) except where specified otherwise 0.315 (8.00) max. 0.610 (15.49) 1.200 (30.48) Pin 8 Pin 1 0.025 (0.64) 0.062 (1.57) Ref. 0.150 (3.81) 8 Places FUNCTION 0.025 (0.64) Typ. 0.070 (1.78) PIN NUMBER 0.025 (0.64) Typ. 0.040 (1.02) Ref. PIN CONNECTIONS 1.200 (30.48) 0.120 (3.05) 9 Places PIN 8 0.150 (3.81) Ref. 0.062 (1.57) PCB Ref. 0.315 (8.00 max.) All dimensions in INCHES (mm) General tolerance 0.01in (0.25mm) except where specified otherwise 0.050 (1.27) 0.025 (0.64) Typ. Figure 2: Mechanical Drawing - Vertical Mount Version Data Sheet (c) Artesyn Technologies(R) 2003 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Data Sheet www.artesyn.com File Name: SIL06C.PDF Rev: 04 Mar 2003