Elite CR-33 Miniature DC-22GHz SPDT Switch Latching The CR-33 Switch is a broadband, SPDT, electromechanical, coaxial switch designed to switch a microwave signal from a common input to either of two outputs. The CR-33 Series has a higher operting Frequency and temperature range than the commercial CCR-33 series. The characteristic impedance is 50 Ohms. The switches are small with connector spacing compatible with SMA connectors. The CR-33 series switch is offered with either a failsafe or latching actuator. This design is compatible with the two most common mounting hole patterns. The CR-33 series switch is interchangeable with a variety of switches. Specifications RF Contacts: Break before make Actuator Voltage (VDC) 20O C 12 Current (mA) 140 115 65 Switching Time: 10 msec max Connectors: SMA (f) Weight: 1.65 oz. max 15 28 Temperature Range: -55O C to +85O C (Operating) Shock: MIL-STD-202 Method 213, Condition D (500G Non Operating) Vibration: MIL-STD-202 Method 214, Condition D (10G RMS Non Operating) Humidity: Moisture Seal Available Typical Contact Life: 5 Million Cycles Insertion Loss Repeatability (1 Million Cycles): RF Power Handling DC to 6 GHz: 0.05 dB DC to 20 GHz: 0.1 dB 3000 Return Loss Typical Performance 800 Sta Power CW (Watts) 400 nda rd S 200 MA Co nne cto rs 15 80 25 40 0.01 1.0 4.0 Frequency GHz 10 Frequency GHz 0.0 0.4 VSWR (max) Insertion Loss (max) Isolation (min) DC-6 GHz 6-12 GHz 12-18 GHz 18-22 GHz 1.25:1 0.20 dB 70.0 dB 1.40:1 0.40 dB 60.0 dB 1.50:1 0.50 dB 60.0 dB 1.60:1 0.60 dB 50.0 dB 60 IL dB Specifications 22.0 18 22 Isolation dB 10 0.1 70 80 90 0.01 Specifications subject to change without notice. Frequency GHz 22.0 www.teledynecoax.com email: coax@teledyne.com Tel: (800) 351-7368 10/2007 Elite CR-33 Miniature DC-22GHz SPDT Switch Latching Indicators TTL Analog H = 1.30 MAX. STD MODEL H = 1.80 MAX. TTL MODEL H = 1.30 MAX. STD MODEL H = 1.80 MAX. TTL MODEL Optional Narrow Width Body Standard Width Body Part Numbering System for CR-33 (Latching) CR-33 S 6 C - N Series Options Connectors Actuator Type Actuator Voltage Connector S: SMA Female Actuator Voltage 6: 28Vdc Latching 7: 15Vdc Latching 8: 12Vdc Latching For other options contact Factory Actuator Type O: No Indicator Contacts C: Indicator Contacts D: Self Cutoff Only E: Indicators and Self Cutoff Specifications subject to change without notice. Options T: TTL Drivers with Diodes N: Narrow Body R: Positive + Common www.teledynecoax.com email: coax@teledyne.com Tel: (800) 351-7368 10/2007