2N3903, 2N3904 General Purpose Transistors NPN Silicon Features http://onsemi.com * Pb-Free Packages are Available* COLLECTOR 3 MAXIMUM RATINGS Symbol Value Unit Collector -Emitter Voltage Rating VCEO 40 Vdc Collector -Base Voltage VCBO 60 Vdc Emitter -Base Voltage VEBO 6.0 Vdc Collector Current - Continuous IC 200 mAdc Total Device Dissipation @ TA = 25C Derate above 25C PD 625 5.0 mW mW/C Total Device Dissipation @ TC = 25C Derate above 25C PD 1.5 12 W mW/C -55 to +150 C Max Unit Operating and Storage Junction Temperature Range TJ, Tstg THERMAL CHARACTERISTICS (Note 1) Characteristic Symbol Thermal Resistance, Junction-to-Ambient RqJA 200 C/W Thermal Resistance, Junction-to-Case RqJC 83.3 C/W Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Indicates Data in addition to JEDEC Requirements. 2 BASE 1 EMITTER TO-92 CASE 29 STYLE 1 1 12 3 STRAIGHT LEAD BULK PACK 2 3 BENT LEAD TAPE & REEL AMMO PACK MARKING DIAGRAMS 2N 390x YWWG G x = 3 or 4 Y = Year WW = Work Week G = Pb-Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 3 of this data sheet. *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2012 August, 2012 - Rev. 8 1 Publication Order Number: 2N3903/D 2N3903, 2N3904 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Max Unit Collector -Emitter Breakdown Voltage (Note 2) (IC = 1.0 mAdc, IB = 0) V(BR)CEO 40 - Vdc Collector -Base Breakdown Voltage (IC = 10 mAdc, IE = 0) V(BR)CBO 60 - Vdc Emitter -Base Breakdown Voltage (IE = 10 mAdc, IC = 0) V(BR)EBO 6.0 - Vdc IBL - 50 nAdc ICEX - 50 nAdc 20 40 35 70 50 100 30 60 15 30 - - - - 150 300 - - - - - - 0.2 0.3 0.65 - 0.85 0.95 250 300 - - OFF CHARACTERISTICS Base Cutoff Current (VCE = 30 Vdc, VEB = 3.0 Vdc) Collector Cutoff Current (VCE = 30 Vdc, VEB = 3.0 Vdc) ON CHARACTERISTICS DC Current Gain (Note 2) (IC = 0.1 mAdc, VCE = 1.0 Vdc) 2N3903 2N3904 2N3903 2N3904 2N3903 2N3904 2N3903 2N3904 2N3903 2N3904 (IC = 1.0 mAdc, VCE = 1.0 Vdc) (IC = 10 mAdc, VCE = 1.0 Vdc) (IC = 50 mAdc, VCE = 1.0 Vdc) (IC = 100 mAdc, VCE = 1.0 Vdc) hFE Collector -Emitter Saturation Voltage (Note 2) (IC = 10 mAdc, IB = 1.0 mAdc) (IC = 50 mAdc, IB = 5.0 mAdc VCE(sat) Base -Emitter Saturation Voltage (Note 2) (IC = 10 mAdc, IB = 1.0 mAdc) (IC = 50 mAdc, IB = 5.0 mAdc) VBE(sat) - Vdc Vdc SMALL-SIGNAL CHARACTERISTICS Current -Gain - Bandwidth Product (IC = 10 mAdc, VCE = 20 Vdc, f = 100 MHz) 2N3903 2N3904 fT MHz Output Capacitance (VCB = 5.0 Vdc, IE = 0, f = 1.0 MHz) Cobo - 4.0 pF Input Capacitance (VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) Cibo - 8.0 pF 1.0 1.0 8.0 10 0.1 0.5 5.0 8.0 50 100 200 400 1.0 40 - - 6.0 5.0 td - 35 ns tr - 35 ns ts - - 175 200 ns tf - 50 ns Input Impedance (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) 2N3903 2N3904 Voltage Feedback Ratio (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) 2N3903 2N3904 Small-Signal Current Gain (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) 2N3903 2N3904 Output Admittance (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) hie hre hfe hoe Noise Figure (IC = 100 mAdc, VCE = 5.0 Vdc, RS = 1.0 k W, f = 1.0 kHz) 2N3903 2N3904 NF kW X 10- 4 - mmhos dB SWITCHING CHARACTERISTICS Delay Time Rise Time Storage Time (VCC = 3.0 Vdc, VBE = 0.5 Vdc, IC = 10 mAdc, IB1 = 1.0 mAdc) (VCC = 3.0 Vdc, IC = 10 mAdc, IB1 = IB2 = 1.0 mAdc) 2N3903 2N3904 Fall Time 2. Pulse Test: Pulse Width v 300 ms; Duty Cycle v 2%. http://onsemi.com 2 2N3903, 2N3904 ORDERING INFORMATION Package Shipping 2N3903RLRM TO-92 2000 / Ammo Pack 2N3904 TO-92 5000 Units / Bulk TO-92 (Pb-Free) 5000 Units / Bulk TO-92 2000 / Tape & Reel TO-92 (Pb-Free) 2000 / Tape & Reel TO-92 2000 / Ammo Pack TO-92 (Pb-Free) 2000 / Ammo Pack TO-92 2000 / Ammo Pack 2N3904RLRPG TO-92 (Pb-Free) 2000 / Ammo Pack 2N3904RL1G TO-92 (Pb-Free) 2000 / Tape & Reel TO-92 2000 / Ammo Pack TO-92 (Pb-Free) 2000 / Ammo Pack Device 2N3904G 2N3904RLRA 2N3904RLRAG 2N3904RLRM 2N3904RLRMG 2N3904RLRP 2N3904ZL1 2N3904ZL1G For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. DUTY CYCLE = 2% 300 ns +3 V +10.9 V 275 10 k -0.5 V CS < 4 pF* < 1 ns * Total shunt capacitance of test jig and connectors Figure 1. Delay and Rise Time Equivalent Test Circuit 10 < t1 < 500 ms DUTY CYCLE = 2% t1 +3 V +10.9 V 275 10 k 0 1N916 -9.1 V CS < 4 pF* < 1 ns * Total shunt capacitance of test jig and connectors Figure 2. Storage and Fall Time Equivalent Test Circuit http://onsemi.com 3 2N3903, 2N3904 TYPICAL TRANSIENT CHARACTERISTICS TJ = 25C TJ = 125C 10 5000 2000 5.0 Q, CHARGE (pC) CAPACITANCE (pF) VCC = 40 V IC/IB = 10 3000 7.0 Cibo 3.0 Cobo 2.0 1000 700 500 QT 300 200 QA 1.0 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 100 70 50 20 30 40 2.0 3.0 5.0 7.0 10 20 30 50 70 100 REVERSE BIAS VOLTAGE (VOLTS) IC, COLLECTOR CURRENT (mA) Figure 3. Capacitance Figure 4. Charge Data 500 200 500 IC/IB = 10 100 70 tr @ VCC = 3.0 V 50 30 20 VCC = 40 V IC/IB = 10 300 200 t r, RISE TIME (ns) 300 200 TIME (ns) 1.0 40 V 100 70 50 30 20 15 V 10 7 5 10 2.0 V td @ VOB = 0 V 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) Figure 5. Turn -On Time Figure 6. Rise Time IC/IB = 10 200 500 ts = ts - 1/8 tf IB1 = IB2 VCC = 40 V IB1 = IB2 300 200 IC/IB = 20 t f , FALL TIME (ns) t s , STORAGE TIME (ns) IC/IB = 20 200 IC, COLLECTOR CURRENT (mA) 500 300 200 7 5 100 70 IC/IB = 20 50 IC/IB = 10 30 20 100 70 50 10 10 7 5 7 5 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 200 IC/IB = 10 30 20 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 7. Storage Time Figure 8. Fall Time http://onsemi.com 4 200 2N3903, 2N3904 TYPICAL AUDIO SMALL-SIGNAL CHARACTERISTICS NOISE FIGURE VARIATIONS (VCE = 5.0 Vdc, TA = 25C, Bandwidth = 1.0 Hz) 14 12 SOURCE RESISTANCE = 200 W IC = 1.0 mA f = 1.0 kHz SOURCE RESISTANCE = 200 W IC = 0.5 mA 8 6 SOURCE RESISTANCE = 1.0 k IC = 50 mA 4 SOURCE RESISTANCE = 500 W IC = 100 mA 2 0 0.1 0.2 0.4 1.0 2.0 IC = 1.0 mA 12 NF, NOISE FIGURE (dB) NF, NOISE FIGURE (dB) 10 IC = 0.5 mA 10 IC = 50 mA 8 IC = 100 mA 6 4 2 4.0 10 20 40 0 100 0.1 0.2 0.4 1.0 2.0 4.0 10 20 f, FREQUENCY (kHz) RS, SOURCE RESISTANCE (k OHMS) Figure 9. Figure 10. 40 100 5.0 10 5.0 10 h PARAMETERS (VCE = 10 Vdc, f = 1.0 kHz, TA = 25C) 100 hoe, OUTPUT ADMITTANCE (m mhos) h fe , CURRENT GAIN 300 200 100 70 50 30 0.1 0.2 0.3 0.5 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) 5.0 50 20 10 5 2 1 10 0.1 0.2 Figure 11. Current Gain Figure 12. Output Admittance h re , VOLTAGE FEEDBACK RATIO (X 10 -4 ) h ie , INPUT IMPEDANCE (k OHMS) 20 10 5.0 2.0 1.0 0.5 0.2 0.1 0.2 0.3 0.5 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) 0.3 0.5 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) 5.0 10 7.0 5.0 3.0 2.0 1.0 0.7 0.5 10 0.1 Figure 13. Input Impedance 0.2 0.3 0.5 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) Figure 14. Voltage Feedback Ratio http://onsemi.com 5 2N3903, 2N3904 h FE, DC CURRENT GAIN (NORMALIZED) TYPICAL STATIC CHARACTERISTICS 2.0 TJ = +125C VCE = 1.0 V +25C 1.0 0.7 -55C 0.5 0.3 0.2 0.1 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 30 70 50 100 200 IC, COLLECTOR CURRENT (mA) VCE, COLLECTOR EMITTER VOLTAGE (VOLTS) Figure 15. DC Current Gain 1.0 TJ = 25C 0.8 IC = 1.0 mA 10 mA 30 mA 100 mA 0.6 0.4 0.2 0 0.01 0.02 0.03 0.05 0.07 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 IB, BASE CURRENT (mA) Figure 16. Collector Saturation Region 1.0 1.2 TJ = 25C VBE(sat) @ IC/IB =10 0.8 VBE @ VCE =1.0 V 0.6 0.4 VCE(sat) @ IC/IB =10 qVC FOR VCE(sat) 0 -55C TO +25C -0.5 -55C TO +25C -1.0 +25C TO +125C 0.2 0 +25C TO +125C 0.5 COEFFICIENT (mV/ C) V, VOLTAGE (VOLTS) 1.0 qVB FOR VBE(sat) -1.5 1.0 2.0 5.0 10 20 50 100 -2.0 200 0 20 40 60 80 100 120 140 160 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 17. "ON" Voltages Figure 18. Temperature Coefficients http://onsemi.com 6 180 200 2N3903, 2N3904 PACKAGE DIMENSIONS TO-92 (TO-226) CASE 29-11 ISSUE AM A B STRAIGHT LEAD BULK PACK R P L SEATING PLANE K D X X G J H V C SECTION X-X N 1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. DIM A B C D G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 --0.250 --0.080 0.105 --0.100 0.115 --0.135 --- MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 --6.35 --2.04 2.66 --2.54 2.93 --3.43 --- N A R BENT LEAD TAPE & REEL AMMO PACK B P T SEATING PLANE G K D X X J V 1 C N SECTION X-X NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. DIM A B C D G J K N P R V MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.40 0.54 2.40 2.80 0.39 0.50 12.70 --2.04 2.66 1.50 4.00 2.93 --3.43 --STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative 2N3903/D