AP7361C 1A LOW DROPOUT ADJUSTABLE AND FIXED-MODE REGULATOR WITH ENABLE Description Pin Assignments (Top View) The AP7361C is a 1A, adjustable and fixed output voltage, ultra-low dropout linear regulator with enable. The device includes pass element, error amplifier, band-gap reference, current limit and thermal shutdown circuitry. The device is turned on when EN pin is set to logic high level. OUT 1 (Top View) 8 IN 7 NC ADJ/NC 3 6 NC GND 4 5 EN NC 2 NEW INFORMATION PRODUCT ADVANCE 1 5 OUT GND 2 GND The characteristics of the low dropout voltage and low quiescent current make it suitable for low-to-medium power applications; for example, laptop computers, audio and video applications, and battery-powered devices. The typical quiescent current is approximately 60A. Built-in current-limit and thermal-shutdown functions prevent IC from damage in fault conditions. EN GND ADJ/NC 3 U-DFN3030-8 (Type E) 4 IN SOT89-5 (Top View) (Top View) The AP7361C is available in U-DFN3030-8 (Type E), SOT89-5, SOT223, TO252 (DPAK) and SO-8EP packages. 3 OUT 3 IN Features 2 GND 2 OUT 1 IN 1 GND * * * * * * * * * * * * * * * * * * * Wide Input Voltage Range: 2.2V to 6.0V Output Voltage Accuracy: 1% Very Low Dropout Voltage (3.3V): 360mV at 1A Typical Low Quiescent Current (IQ): 60A Typical Adjustable Output Voltage Range: 0.8V to 5.0V Fixed Output Options: 1.0V, 1.2V, 1.5V, 1.8V, 2.5V, 2.8V and 3.3V High PSRR: 75dB @ 1kHz Current Limit: 1.5A Fold-Back Short Circuit Protection: 400mA Thermal Shutdown Protection Stable with MLCC, E-Cap, Tan-Cap or Solid Capacitor 2.2F Ambient Temperature Range: -40C to +85C Available in "Green" Molding Compound (No Br, Sb) Moisture Sensitivity: Level 1 Per J-STD-020 Terminals: SOT89-5/ SOT223/ SO-8EP/ TO252: Finish - Matte Tin Plated Leads, Solderable per MIL-STD202, Method 208 U-DFN3030-8: Finish - NiPdAu over Copper Leads, Solderable per MILSTD-202, Method 208 Weight: U-DFN3030-8: 0.017 grams (Approximate) SOT89-5: 0.059 grams (Approximate) SOT223: 0.113 grams (Approximate) SO-8EP: 0.081 grams (Approximate) TO252: 0.33 grams (Approximate) Diodes automotive grade parts (Q-suffix) are suitable for automotive applications requiring specific change control; these parts are AEC-Q100/101/200 qualified, PPAP capable, and manufactured in IATF16949:2016 certified facilities. https://www.diodes.com/quality/product-definitions/ Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen- and Antimony-Free. "Green" Device (Note 3) Notes: SOT223 SOT223R (Top View) (Top View) OUT 1 8 IN OUT 1 8 IN EN 2 7 NC ADJ/NC 2 7 NC NC 3 6 NC GND 3 6 NC GND 4 5 NC NC 4 5 EN SO-8EP SO-8EPR (Top View) (Top View) 3 OUT 3 IN 2 GND 2 OUT 1 IN 1 GND TO252 (DPAK) TO252 (DPAK) R Applications * * * LCD-TV, Monitor Set-Top-Box Home Electrical Appliances 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. AP7361C Document number: DS37274 Rev. 5 - 2 1 of 22 www.diodes.com October 2020 (c) Diodes Incorporated AP7361C Typical Applications Circuit VIN NEW INFORMATION PRODUCT ADVANCE VIN VOUT IN AP7361C CIN 4.7F Enable VOUT IN OUT AP7361C CIN 4.7F COUT 4.7F Enable EN OUT COUT 4.7F ADJ EN GND GND Fixed Version with EN Adjustable Output VIN R1 R2 VOUT IN OUT COUT 4.7F AP7361C CIN 4.7F GND Fixed Version without EN Pin Descriptions Pin Number TO252 U-DFN3030-8 TO252 SOT89-5 SOT223 SOT223R SO-8EP SO-8EPR (Type E) (DPAK) (DPAK)R Pin Name Function The input of the regulator. Bypass to ground through at least 1F ceramic capacitor. The output of the regulator. Bypass to ground through at least 2.2F ceramic capacitor. For improved ac load response a larger capacitor is recommended. 8 4 1 3 1 3 8 8 IN 1 5 3 2 3 2 1 1 OUT 4 2 2 1 2 1 4 3 GND 3 3 - - - - - 2 ADJ/NC 5 1 - - - - 2 5 EN Enable input, active high 2, 6, 7 - - - - - 3, 5, 6, 7 4, 6, 7 NC No connection AP7361C Document number: DS37274 Rev. 5 - 2 2 of 22 www.diodes.com Ground Adjustable voltage version only - a resistor divider from this pin to the OUT pin and ground sets the output voltage. October 2020 (c) Diodes Incorporated AP7361C Functional Block Diagram NEW INFORMATION PRODUCT ADVANCE IN EN OUT Gate Driver Current Limit and Thermal Shutdown IN EN R OUT Gate Driver Current Limit and Thermal Shutdown ADJ 0.8V 0.8V R GND Fixed Version with EN GND Adjustable Version IN OUT Gate Driver Current Limit and Thermal Shutdown R 0.8V R GND Fixed Version without EN AP7361C Document number: DS37274 Rev. 5 - 2 3 of 22 www.diodes.com October 2020 (c) Diodes Incorporated AP7361C Absolute Maximum Ratings (@ TA = +25C, unless otherwise specified.) (Note 4) Symbol VIN Input Voltage - OUT, ADJ, EN Voltage TJ Operating Junction Temperature Range TSTG NEW INFORMATION PRODUCT ADVANCE Parameter PD PD Power Dissipation ESD HBM Human Body Model ESD Protection ESD MM Machine Model ESD Protection (Note 5) Notes: Unit 6.5 V VIN +0.3 V -40 to +150 C -65 to +150 C Internally limited by maximum junction temperature of +150C - Storage Temperature Range Power Dissipation Rating U-DFN3030-8 (Type E) 1700 TO252 (DPAK) 1250 SOT223 1100 SOT89-5 800 SO-8EP 1190 mW >2 KV > 200 V 4. Stresses greater than the 'Absolute Maximum Ratings' specified above may cause permanent damage to the device. These are stress ratings only; functional operation of the device at these or any other conditions exceeding those indicated in this specification is not implied. Device reliability may be affected by exposure to absolute maximum rating conditions for extended periods of time. 5. ESD MM rating at 150V for EN pin in SOT89-5 package. Recommended Operating Conditions (@ TA = +25C, unless otherwise specified.) Symbol Min Max Unit Input Voltage 2.2 6.0 V VOUT Output Voltage 0.8 5.0 V IOUT Output Current (Note 6) 0 1.0 A -40 +85 C VIN TA Notes: Parameter Operating Ambient Temperature 6. The device maintains a stable, regulated output voltage without a load current. When the output current is large, attention should be given to the limitation of the package power dissipation. AP7361C Document number: DS37274 Rev. 5 - 2 4 of 22 www.diodes.com October 2020 (c) Diodes Incorporated AP7361C Electrical Characteristics (@ TA = +25C, VIN = VOUT +1V, CIN = 4.7F, COUT = 4.7F, VEN = VIN, unless otherwise specified.) NEW INFORMATION PRODUCT ADVANCE Symbol Parameter Test Conditions VREF FB Reference Voltage, ADJ pin IOUT = 10mA, TA = +25C IADJ Min Typ Max Unit 0.792 0.8 0.808 V A ADJ Pin Leakage Current - - 0.1 0.5 IQ Input Quiescent Current Enabled, IOUT = 0A - 60 80 A ISHDN Input Shutdown Current VEN = 0V, IOUT = 0A -1 0.05 1 A 1.0VVOUT<1.5V VOUT(s)0.015 VOUT(s) Output Voltage Accuracy IOUT = 100mA, TA = +25C VOUT(s)+ 0.015 1.5 VVOUT3.3V VOUT(s)* 0.99 VOUT(s) VOUT(s)* 1.01 - 0.01 0.1 - - 0.2 1.2V<VOUT 3.3V -1.0 - 1.0 % % VOUT VOUT VIN x VOUT Line Regulation VIN = VOUT +1V to 5.5V, TA = +25C IOUT = 100mA -40C TA +85C VOUT / VOUT Load Regulation IOUT from 1.0mA to 1A IOUT = 300mA VDROPOUT Dropout Voltage (Note 7) IOUT = 1A 1.0VVOUT 1.2V -1.5 - 1.5 1.0VVOUT<1.1V - 710 750 1.1VVOUT<1.2V - 600 640 1.2VVOUT<1.3V - 500 540 1.3VVOUT<1.4V - 400 440 1.4VVOUT<1.5V - 300 340 1.5VVOUT<2.6V - 200 250 2.6VVOUT3.3V - 90 140 1.0VVOUT<1.1V - 840 - 1.1VVOUT<1.2V - 780 - 1.2VVOUT<1.3V - 710 - 1.3VVOUT<1.4V - 660 - 1.4VVOUT<1.5V - 610 - 1.5VVOUT<2.0V - 570 - 2.0VVOUT<2.6V - 440 - 2.6VVOUT3.3V - 340 - V %/V mV VIL EN Input Logic Low Voltage - 0 - 0.3 VIH EN Input Logic High Voltage - 1.0 - VIN V EN Pull-Down Resistor - - 3.0 - M IEN EN Input Leakage Current VIN = 5.5V, VEN = 0V -0.1 - 0.1 A RENPD V RPD Output Discharge Resistor VOL=1V - 100 - IOUT Maximum Output Current VIN = VOUT +1V 1.0 - - A ILIMIT Current Limit VIN = VOUT +1V(VIN MINI=2.2V) 1.1 1.5 - A ISHORT Short-Circuit Current VIN = VOUT +1V, Output Voltage < 15% VOUT - 400 - mA PSRR Power Supply Rejection Ratio (Note 8) f = 1kHz, IOUT = 100mA - 75 - f = 10kHz, IOUT = 100mA - 55 - dB Start-Up Time VOUT = 3V, COUT = 2.2F, RL = 30 - 150 - s VOUT TA x VOUT Output Voltage Temperature Coefficient IOUT = 100mA, -40C TA +85C - 100 - ppm/C TSHDN Thermal Shutdown Threshold - - 150 - C THYS Thermal Shutdown Hysteresis - - 20 - C tST Notes: 7. Dropout voltage is the voltage difference between the input and the output at which the output voltage drops 2% below its nominal value. This parameter only applies to output voltages above 1.2V since minimum VIN = 2.2V. 8. For VIN 2.5V and VIN = VOUT +1V. For VIN < 2.5V, the PSRR performance may be reduced. AP7361C Document number: DS37274 Rev. 5 - 2 5 of 22 www.diodes.com October 2020 (c) Diodes Incorporated AP7361C Electrical Characteristics (@ TA = +25C, VIN = VOUT +1V, CIN = 4.7F, COUT = 4.7F, VEN = VIN, unless otherwise specified.) (Cont.) Symbol Thermal Resistance Junction-toAmbient NEW INFORMATION PRODUCT ADVANCE JA Notes: Parameter Min Typ Max U-DFN3030-8 (Type E ) (Note 9) TO252 (DPAK) (Note 9) Test Conditions - - 70 95 - - SOT223 (Note 9) - 110 - SOT89-5 (Note 9) - 150 - SO-8EP (Note 9) - 100 - Unit C/W 9. Test condition: U-DFN3030-8 (Type E), SO-8EP devices are mounted on 2"x2", FR-4 substrate PCB, with minimum recommended pad on top layer and thermal vias to bottom layer ground plane. TO252(DPAK) devices are mounted on 2"x2" FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout. For SOT223, the device is mounted on FR-4 substrate PC board, with minimum recommended pad layout. SOT89-5 devices are mounted on 1"x1" FR-4 substrate PC board, with minimum recommended pad layout. Performance Characteristics Start-up Time Start-up Time VEN = 0V to 2V (1V/div) VIN = 4.0V VIN = 4.7F, COUT = 2.2F VEN = 0V to 2V (1V/div) VIN = 4.0V VIN = 4.7F, COUT = 2.2F VOUT = 3V (1V/div) With 100mA load VOUT = 3V (1V/div) With 500mA load Time (100s/div) Time (100s/div) Line Transient Response Line Transient Response VIN = 4.3V to 5.3V (1V/div) tR = tF = 5s IOUT = 100mA COUT = 4.7F VIN = 2.2V to 3.2V (1V/div) tR = tF = 5s IOUT = 100mA COUT = 4.7F VOUT = 3.3V (20mV/div) VOUT = 1.2V (20mV/div) Time (40s/div) AP7361C Document number: DS37274 Rev. 5 - 2 Time (40s/div) 6 of 22 www.diodes.com October 2020 (c) Diodes Incorporated AP7361C Performance Characteristics (Cont.) Load Transient Response Load Transient Response V = VEN = 2.2V VIN IN = VEN = 2.2V = 4.7F C IN COUT CIN == C OUT = 4.7F NEW INFORMATION PRODUCT ADVANCE VIN = VEN = 2.2V CIN = COUT = 4.7F = 1.2V (20mV/div) V VOUT OUT = 1.2V (20mV/div) VOUT = 1.2V (20mV/div) IOUT = 50mA to 100mA (50mA/div) = 100mA to 500mA (200mA/div) IIOUT OUT = 100mA to 500mA (200mA/div) Time (200s/div) Time (200s/div) Load Transient Response Load Transient Response VIN = VEN = 4.3V CIN = COUT = 4.7F VIN = VEN = 4.3V CIN = COUT = 4.7F VOUT = 3.3V (20mV/div) VOUT = 3.3V (20mV/div) IOUT = 50mA to 100mA (50mA/div) IOUT = 100mA to 500mA (200mA/div) Time (200s/div) Time (200s/div) Load Transient Response Load Transient Response VIN = VEN = 6.0V CIN = COUT = 4.7F VIN = VEN = 6.0V CIN = COUT = 4.7F VOUT = 5.0V (20mV/div) VOUT = 5.0V (20mV/div) IOUT = 50mA to 100mA (50mA/div) IOUT = 100mA to 500mA (200mA/div) Time (200s/div) Time (200s/div) AP7361C Document number: DS37274 Rev. 5 - 2 7 of 22 www.diodes.com October 2020 (c) Diodes Incorporated AP7361C NEW INFORMATION PRODUCT ADVANCE Performance Characteristics (Cont.) AP7361C Document number: DS37274 Rev. 5 - 2 8 of 22 www.diodes.com October 2020 (c) Diodes Incorporated AP7361C NEW INFORMATION PRODUCT ADVANCE Performance Characteristics (Cont.) AP7361C Document number: DS37274 Rev. 5 - 2 9 of 22 www.diodes.com October 2020 (c) Diodes Incorporated AP7361C NEW INFORMATION PRODUCT ADVANCE Performance Characteristics (Cont.) Application Information Input Capacitor A 1F ceramic capacitor is recommended between the IN and GND pins to decouple input power supply glitch and noise. The amount of the capacitance may be increased without limit. This input capacitor must be located as close as possible to the device to assure input stability and reduce noise. For PCB layout, a wide copper trace is required for both IN and GND pins. A lower ESR capacitor type allows the use of less capacitance, while higher ESR type requires more capacitance. Output Capacitor The output capacitor is required to stabilize and improve the transient response of the LDO. The AP7361C is stable with very small ceramic output capacitors. Using a ceramic capacitor value that is at least 2.2F on the output ensures stability. Higher capacitance values help to improve line and load transient response. The output capacitance may be increased to keep low undershoot and overshoot. Output capacitor must be placed as close as possible to OUT and GND pins. AP7361C Document number: DS37274 Rev. 5 - 2 10 of 22 www.diodes.com October 2020 (c) Diodes Incorporated AP7361C Application Information (Cont.) Adjustable Operation NEW INFORMATION PRODUCT ADVANCE The AP7361C provides output voltage from 0.8V to 5.0V through external resistor divider as shown below. VIN VOUT IN OUT AP7361C R1 4.7F 1F Enable ADJ EN GND R2 Adjustable Output The output voltage is calculated by: R VOUT = VREF 1 + 1 R2 Where VREF = 0.8V (the internal reference voltage) Rearranging the equation will give the following that is used for adjusting the output to a particular voltage: V R1 = R2 OUT - 1 V REF To maintain the stability of the internal reference voltage, R2 needs to be kept smaller than 80k. No Load Stability Other than external resistor divider, no minimum load is required to keep the device stable. The device will remain stable and regulated in no load condition. ON/OFF Input Operation The ON/OFF feature is not available in the SOT223 and TO252 (DPAK) packages. The AP7361C is turned on by setting the EN pin high, and is turned off by pulling it low. If this feature is not used, the EN pin should be tied to IN pin to keep the regulator output on at all time. To ensure proper operation, the signal source used to drive the EN pin must be able to swing above and below the specified turn-on/off voltage thresholds listed in the Electrical Characteristics section under VIL and VIH. Current Limit Protection When output current at OUT pin is higher than current limit threshold, the current limit protection will be triggered and clamp the output current to prevent over-current and to protect the regulator from damage due to overheating. Short Circuit Protection When OUT pin is short-circuit to GND, short circuit protection will be triggered and clamp the output current to approximately 400mA. Full current is restored when the output voltage exceeds 15% of VOUT. This feature protects the regulator from over-current and damage due to overheating. AP7361C Document number: DS37274 Rev. 5 - 2 11 of 22 www.diodes.com October 2020 (c) Diodes Incorporated AP7361C Application Information (Cont.) Thermal Shutdown Protection NEW INFORMATION PRODUCT ADVANCE Thermal protection disables the output when the junction temperature rises to approximately +150C, allowing the device to cool down. When the junction temperature reduces to approximately +130C the output circuitry is enabled again. Depending on power dissipation, thermal resistance, and ambient temperature, the thermal protection circuit may cycle on and off. This cycling limits the heat dissipation of the regulator, protecting it from damage due to overheating. Ultra Fast Start-up After enabled, the AP7361C is able to provide full power in as little as tens of microseconds, typically 200s, without sacrificing low ground current. This feature will help load circuitry move in and out of standby mode in real time, eventually extend battery life for mobile phones and other portable devices. Low Quiescent Current The AP7361C, consuming only around 60A for all input range, provides great power saving in portable and low power applications. Power Dissipation The device power dissipation and proper sizing of the thermal plane that is connected to the thermal pad is critical to avoid thermal shutdown and ensure reliable operation. Power dissipation of the device depends on input voltage and load conditions and can be calculated by: PD = (VIN - VOUT) x IOUT The maximum power dissipation, handled by the device, depends on the maximum junction to ambient thermal resistance, maximum ambient temperature, and maximum device junction temperature, which can be calculated by the equation in the following: PD (max@T ) = A (+150C - T ) A R JA ESR vs. Output Current Ceramic type output capacitor is recommended for this series; however, the other output capacitors with low ESR also can be used. The relations between IOUT (Output Current) and ESR of an output capacitor are shown below. The stable region for the safety operating temperature (-40C ~ +85C) is marked as the gray area in the graph. Measurement conditions: Frequency Band: 10Hz to 2MHz, Temperature: -40C to +85C. AP7361C Document number: DS37274 Rev. 5 - 2 12 of 22 www.diodes.com October 2020 (c) Diodes Incorporated AP7361C Ordering Information NEW INFORMATION PRODUCT ADVANCE AP7361C - XX XXX - XX Output Package Blank : ADJ 10 : 1.0V 12 : 1.2V 15 : 1.5V 18 : 1.8V 25 : 2.5V 28 : 2.8V 33 : 3.3V FGE : U-DFN3030-8 (Type E) Y5 : SOT89-5 D : TO252 (DPAK) DR : TO252 (DPAK)R E : SOT223 ER : SOT223R SP : SO-8EP SPR : SO-8EPR Part Number Package Code Packaging AP7361C-XXFGE-7 FGE U-DFN3030-8 (Type E) 3000/Tape & Reel -7 AP7361C-XXY5-13 Y5 SOT89-5 2500/Tape & Reel -13 Packing 7 : 7' Tape & Reel 13 : 13' Tape & Reel 7"/13" Tape and Reel Quantity Part Number Suffix AP7361C-XXD-13 D TO252 (DPAK) 2500/Tape & Reel -13 AP7361C-XXDR-13 DR TO252 (DPAK)R 2500/Tape & Real -13 AP7361C-XXE-13 E SOT223 2500/Tape & Reel -13 AP7361C-XXER-13 ER SOT223R 2500/Tape & Reel -13 AP7361C-XXSP-13 SP SO-8EP 2500/Tape & Reel -13 AP7361C-XXSPR-13 SPR SO-8EPR 2500/Tape & Reel -13 AP7361C Document number: DS37274 Rev. 5 - 2 13 of 22 www.diodes.com October 2020 (c) Diodes Incorporated AP7361C Marking Information (1) U-DFN3030-8 (Type E) ( Top View ) XX : Identification Code Y : Year : 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : Internal Code (2) Device Package Identification Code AP7361C-ADJ AP7361C-10 AP7361C-12 AP7361C-15 AP7361C-18 AP7361C-25 AP7361C-28 AP7361C-33 U-DFN3030-8 (Type E) U-DFN3030-8 (Type E) U-DFN3030-8 (Type E) U-DFN3030-8 (Type E) U-DFN3030-8 (Type E) U-DFN3030-8 (Type E) U-DFN3030-8 (Type E) U-DFN3030-8 (Type E) SH SJ SK SV SW SX SY SZ SOT89-5 4 7 5 (Top View) Device AP7361C-ADJ AP7361C-10 AP7361C-12 AP7361C-15 AP7361C-18 AP7361C-25 AP7361C-28 AP7361C-33 AP7361C Document number: DS37274 Rev. 5 - 2 3 2 XX Y W X 1 NEW INFORMATION PRODUCT ADVANCE XX YW X XX : Identification Code Y : Year : 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : Internal Code Package SOT89-5 SOT89-5 SOT89-5 SOT89-5 SOT89-5 SOT89-5 SOT89-5 SOT89-5 14 of 22 www.diodes.com Identification Code KR KS KT KU KV KW KX KZ October 2020 (c) Diodes Incorporated AP7361C Marking Information (Cont.) (3) TO252 (DPAK) Pin 1: IN, Pin 2: GND, Pin 3: OUT NEW INFORMATION PRODUCT ADVANCE ( Top View ) Logo Part Number 61-VV : 10 for 1.0V 12 for 1.2V 15 for 1.5V 18 for 1.8V 25 for 2.5V 28 for 2.8V 33 for 3.3V (4) YY : Year : 01~09 WW : Week : 01~52, 52 represents 52 and 53 week X X : Internal Code 61-VV YY WW X X SOT223 Pin 1: IN, Pin 2: GND, Pin 3: OUT ( Top View ) Logo Part Number 61-VV : 10 for 1.0V 12 for 1.2V 15 for 1.5V 18 for 1.8V 25 for 2.5V 28 for 2.8V 33 for 3.3V YWX 61-VV Y : Year : 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z repersents 52 and 53 week X : Internal code (5) SOT223R Pin 1: GND, Pin 2: OUT, Pin 3: IN ( Top View ) Logo Part Number 61R-VV : 10 for 1.0V 12 for 1.2V 15 for 1.5V 18 for 1.8V 25 for 2.5V 28 for 2.8V 33 for 3.3V AP7361C Document number: DS37274 Rev. 5 - 2 YWX 61R-VV Y : Year : 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z repersents 52 and 53 week X : Internal code 15 of 22 www.diodes.com October 2020 (c) Diodes Incorporated AP7361C Marking Information (Cont.) (6) TO252 (DPAK)R Pin 1: GND, Pin 2: OUT, Pin 3: IN NEW INFORMATION PRODUCT ADVANCE ( Top View ) Logo Part Number 61R-VV : 10 for 1.0V 12 for 1.2V 15 for 1.5V 18 for 1.8V 25 for 2.5V 28 for 2.8V 33 for 3.3V YY : Year : 01~09 WW : Week : 01~52, 52 represents 52 and 53 week X X : Internal Code 61R-VV YY WW X X (7) SO-8EP Pin 1: OUT, Pin 2: EN, Pins 3, 5, 6 and 7: NC, Pin 4: GND, Pin 8: IN ( Top View ) 8 5 Logo Part Number AP7361C-VV: 10 for 1.0V 12 for 1.2V 15 for 1.5V 18 for 1.8V 25 for 2.5V 28 for 2.8V 33 for 3.3V AP7361C-VV YY WW X X E YY : Year : 08, 09. 10~ WW : Week : 01~52, 52 represents 52 and 53 week X X : Internal Code SO-8EP 1 4 (8) SO-8EPR Pin 1: OUT, Pin 2: ADJ/NC, Pin 3: GND, Pins 4, 6 and 7: NC, Pin 5: EN, Pin 8: IN ( Top View ) 8 Logo Part Number 7361CR-VV: Blank for ADJ 10 for 1.0V 12 for 1.2V 15 for 1.5V 18 for 1.8V 25 for 2.5V 28 for 2.8V 33 for 3.3V AP7361C Document number: DS37274 Rev. 5 - 2 5 7361CR-VV YY WW X X E YY : Year : 08, 09. 10~ WW : Week : 01~52, 52 represents 52 and 53 week X X : Internal Code SO-8EP 1 4 16 of 22 www.diodes.com October 2020 (c) Diodes Incorporated AP7361C Package Outline Dimensions (All dimensions in mm.) Please see http://www.diodes.com/package-outlines.html for the latest version. (1) Package Type: U-DFN3030-8 (Type E) U-DFN3030-8 Type E Dim Min Max Typ A 0.57 0.63 0.60 A1 0 0.05 0.02 A3 0.15 - - b 0.20 0.30 0.25 D 2.95 3.05 3.00 D2 2.15 2.35 2.25 E 2.95 3.05 3.00 e 0.65 - - E2 1.40 1.60 1.50 L 0.30 0.60 0.45 Z 0.40 - - All Dimensions in mm A NEW INFORMATION PRODUCT ADVANCE A3 A1 D D2 L (x8) E E2 e Z (x4) b (x8) R0 .2 00 (2) Package Type: SOT89-5 D1 C L SOT89-5 Dim Min Max Typ A 1.40 1.60 1.50 B 0.50 0.62 0.56 B1 0.44 0.54 0.48 C 0.35 0.43 0.38 D 4.40 4.60 4.50 D1 1.62 1.83 1.733 E 2.40 2.60 2.50 e 1.50 H 3.95 4.25 4.10 L 0.65 0.95 0.80 All Dimensions in mm H E L B1 e B 8 ( 4x) A D AP7361C Document number: DS37274 Rev. 5 - 2 17 of 22 www.diodes.com October 2020 (c) Diodes Incorporated AP7361C Package Outline Dimensions (Cont.) (All dimensions in mm.) Please see http://www.diodes.com/package-outlines.html for the latest version. NEW INFORMATION PRODUCT ADVANCE (3) Package Type: TO252 (DPAK) E A b3 71 c L3 D A2 L4 e H b( 3x) b2( 2x) Gauge Plane E1 0.508 D1 Seating Plane a L TO252 (DPAK) Dim Min Max Typ A 2.19 2.39 2.29 A1 0.00 0.13 0.08 A2 0.97 1.17 1.07 b 0.64 0.88 0.783 b2 0.76 1.14 0.95 b3 5.21 5.46 5.33 c 0.45 0.58 0.531 D 6.00 6.20 6.10 D1 5.21 e 2.286 E 6.45 6.70 6.58 E1 4.32 H 9.40 10.41 9.91 L 1.40 1.78 1.59 L3 0.88 1.27 1.08 L4 0.64 1.02 0.83 a 0 10 All Dimensions in mm A1 2.74REF AP7361C Document number: DS37274 Rev. 5 - 2 18 of 22 www.diodes.com October 2020 (c) Diodes Incorporated AP7361C Package Outline Dimensions (Cont.) (All dimensions in mm.) Please see http://www.diodes.com/package-outlines.html for the latest version. (4) Package Type: SOT223 D Q C SOT223 Dim Min Max Typ A 1.55 1.65 1.60 A1 0.010 0.15 0.05 b 0.60 0.80 0.70 b1 2.90 3.10 3.00 C 0.20 0.30 0.25 D 6.45 6.55 6.50 E 3.45 3.55 3.50 E1 6.90 7.10 7.00 e 4.60 e1 2.30 L 0.85 1.05 0.95 Q 0.84 0.94 0.89 All Dimensions in mm E1 E Gauge Plane 0.25 Seating Plane e1 L b 0 -1 0 e A1 7 7 A (5) Package Type: SO-8EP EXPOSED PAD H E1 F 1 b E 45 7 N C All sid e) Q 9 ( 43 R Gauge Plane Seating Plane A 1 0. e A1 NEW INFORMATION PRODUCT ADVANCE b1 D AP7361C Document number: DS37274 Rev. 5 - 2 L E0 19 of 22 www.diodes.com SO-8EP Dim Min Max Typ A 1.40 1.50 1.45 A1 0.00 0.13 b 0.30 0.50 0.40 C 0.15 0.25 0.20 D 4.85 4.95 4.90 E 3.80 3.90 3.85 E0 3.85 3.95 3.90 E1 5.90 6.10 6.00 e 1.27 F 2.75 3.35 3.05 H 2.11 2.71 2.41 L 0.62 0.82 0.72 N 0.35 Q 0.60 0.70 0.65 All Dimensions in mm October 2020 (c) Diodes Incorporated AP7361C Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. (1) Package Type: U-DFN3030-8 (Type E) NEW INFORMATION PRODUCT ADVANCE X (x8) C Y (x8) Y1 Y2 Dimensions C C1 X Y Y1 Y2 Value (in mm) 0.65 2.35 0.30 0.65 1.60 2.75 C1 (2) Package Type: SOT89-5 C C1 Dimensions X2 C C1 X X1 X2 X3 Y Y1 Y2 Y3 Y3 Y2 Y Y1 X1 X X3 Value (in mm) 1.500 1.050 0.680 0.760 1.930 3.680 1.200 1.200 4.250 4.500 (3) Package Type: TO252 (DPAK) X1 Dimensions C X X1 Y Y1 Y2 Y1 Y2 C Value (in mm) 4.572 1.060 5.632 2.600 5.700 10.700 Y X AP7361C Document number: DS37274 Rev. 5 - 2 20 of 22 www.diodes.com October 2020 (c) Diodes Incorporated AP7361C Suggested Pad Layout (Cont.) Please see http://www.diodes.com/package-outlines.html for the latest version. (4) Package Type: SOT223 NEW INFORMATION PRODUCT ADVANCE X1 Y1 C1 Dimensions Value (in mm) C 2.30 C1 6.40 X 1.20 X1 3.30 Y 1.60 Y1 1.60 Y2 8.00 Y2 Y C X (5) Package Type: SO-8EP X2 Dimensions C X X1 X2 Y Y1 Y2 Y1 Y2 X1 Y C AP7361C Document number: DS37274 Rev. 5 - 2 Value (in mm) 1.270 0.802 3.502 4.612 1.505 2.613 6.500 X 21 of 22 www.diodes.com October 2020 (c) Diodes Incorporated AP7361C IMPORTANT NOTICE NEW INFORMATION PRODUCT ADVANCE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2020, Diodes Incorporated www.diodes.com AP7361C Document number: DS37274 Rev. 5 - 2 22 of 22 www.diodes.com October 2020 (c) Diodes Incorporated