CMF Series Powertron * * * * * * * Resistances from 5.1Ohm to 10MOhms Power Rating 0.065 to 0.25 Watts Resistance Tolerances to 0.05% TCR's to 5 ppm/K Extreme Low Noise Precision / Thin Film Resistance Element Sizes: 0603 / 0805 / 1206 / 1210 / 2512 SPECIFICATIONS Type 0603 0805 1206 Power Rating ( W )1 0.065 0.125 0.25 Working Voltage ( VAC ) 75 100 200 Resistance Range (W) Tolerances Available ( % ) Temperature Coefficients Available ( ppm/K ) 2 5.1W - <10W - - 1% 50 10W - <47W 0.1% to 1% 25 / 50 0.1% to 1% 25 / 50 0.1% to 1% 25 / 50 47W - <100W 0.1% to 1% 10 / 15 / 25 / 50 0.1% to 1% 10 / 15 / 25 / 50 0.1% to 1% 10 / 15 / 25 / 50 100W - 332k 0.1% to 1% 5 / 10 / 15 / 25 / 50 0.05% to 1% 5 / 10 / 15 / 25 / 50 0.05% to 1% 5 / 10 / 15 / 25 / 50 >332k - 1M - 0.1% to 1% 10 / 15 / 25 / 50 0.05% to 1% 10 / 15 / 25 / 50 >1M - 2M - - 0.25% to 1% 50 >2M - 10M - - 1 W @ 70 C / 0W @ 125 C 5 / 10 / 15 PPM : +25 C to +85 C 3 1000V Available / contact factory 2 Document Number: 64304 Revision: 20-09-10 For technical questions, contact: powertron@vishaypg.com www.powertron.de 1 CMF Series Powertron SPECIFICATIONS (continued) Specification Value Temperature Range -55C to +125C Climactic Cetegory 55 / 125 / 56 Solderability 250C / 3s Max. Soldering Temperature 260C / 10s Max DR Long Term Stability < 47W 47W - 10 MW Storage 125C / 1000h 0.25% 0.15% Load Life / P=70% / 70C / 1000h 0.25% 0.1% Humidity / 96%RH / 40C / 56 days 0.5% 0.15% Type Dimensions L B D C CMF 0603 0.063 0.004 [ 1.6 0.1 ] 0.030 0.004 [ 0.8 0.1 ] 0.018 0.004 [ 0.45 0.1 ] 0.012 0.008 [ 0.3 0.2 ] CMF 0805 0.080 0.004 [ 2.0 0.1 ] 0.050 0.004 [ 1.25 0.1 ] 0.022 0.004 [ 0.55 0.1 ] 0.016 0.008 [ 0.4 0.2 ] CMF 1206 0.126 0.008 [ 3.2 0.2 ] 0.063 0.006 [ 1.6 0.15 ] 0.022 0.004 [ 0.55 0.1 ] 0.020 0.008 [ 0.5 0.2 ] Power Derating Curve 120 Bulk or Blistertape to IEC 60286-3 100 Tape width 8mm / Reel Diameter 180 or 330mm Minimum quantity Bulk / 100 pieces per value Minimum quantity Tape & Reel / 1000 pieces per value Ordering Information Power ( % ) Packaging: 80 60 40 20 0 0 25 Part Number - Resistance - Tolerance - TCR - Packaging Example: CMF 0603 10 kOhms 0.1% 10ppm Tape ( Note: if no TCR is Specified / The highest value will be supplied ) www.powertron.de 2 50 75 100 125 150 175 Ambient Temperature (C) For technical questions, contact: powertron@vishaypg.com Document Number: 64304 Revision: 20-09-10 Legal Disclaimer Notice Vishay Precision Group Disclaimer ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE. Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay Precision Group"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. The product specifications do not expand or otherwise modify Vishay Precision Group's terms and conditions of purchase, including but not limited to, the warranty expressed therein. Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Information provided in datasheets and/or specifications may vary from actual results in different applications and performance may vary over time. Statements regarding the suitability of products for certain types of applications are based on Vishay Precision Group's knowledge of typical requirements that are often placed on Vishay Precision Group products. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any conduct of Vishay Precision Group. The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document No.: 63999 Revision: 27-Apr-11 www.vishaypg.com 1