1
Poke Home – Junction Box
Series 9286
Wire-to-Wire connectors have been used in the industrial market for years with traditional
2-Piece (plug and socket) connector systems which require crimp and poke wire
terminations to connect electrical or electronic components. In the general wiring market
(2-3 wires) there are a number of connector styles available, however, they are limited in
sizes, expanded wire gauges and the ability to reuse them when repair or replacement
is needed. Based on the existing success of “Poke Home” wire-to-board connectors,
AVX has developed a new family of wire-to-wire connectors to meet the cost, flexibility
and ease-of-use targets in industrial wiring applications.
The 9286 series of Junction Box connectors provide a high spring force Beryllium
Copper contact system that uses simple push button activation to insert and remove
individual stripped wires in the connection process. There is a forward and aft shrouded
(to prevent accidental activation) push button for each wire connection that can be
operated individually or simultaneously with a simple plastic tool or ball point pen tip. This
connector family has been designed to bring a single wire in and then have multiple
output (bus structure) wires of the same power or signal. Four, Six or Eight wires can be
electrically connected together in a single connector body which will support any
combination of wire gauges from 18AWG up to 26 AWG. Wires can be removed or
replaced up to 5 times so there is no need to replace the connector in a new installation.
ELECTRICAL
• Current Rating: 10 Amps total
• Voltage Rating: 300v AC
9286
Series
00
Prefix
00X
Number of Ways
06
Plating Option
06 = Tin all over
HOW TO ORDER
121
Wire Size
ENVIRONMENTAL
• Operating Temperature:
-40ºC to +125ºC
MECHANICAL
• Insulator Material: Glass-Filled
Nylon 46; UL94V0
• Contact Material: Beryllium Copper /
Phosphor Bronze
• Plating: Tin over Nickel
• Replacibility: 5 Cycles
FEATURES AND BENEFITS
• High spring force top contact provides a lance type retention to capture
and retain the wire
•
Shrouded dual push button activation for easy wire insertion/removal
•
Accepts 18-26AWG Solid and Stranded wires; any combination
•
Expanded size offering to maximize application potential; 4, 6 or 8
positions
•
Optional mounting tape to secure in panel mounting applications
•
Molded in position numbers and schematic for easy identification
APPLICATIONS
• Industrial/Machine Control; motors, solenoids,
PLC’s, pumps, valves, sensors, fans…
• Commercial/Building; fixtures, fire, security,
surveillance, blinds, sensors, controls…
• Commercial/Industrial LED; retail, office,
manufacturing, signage, displays…
• Application notes; refer to 201-01-135
Code No of Details
Ways
004 4 Page 2
006 6 Page 3
008 8 Page 4
Code Wire Max Max
Gauge Conductor Insulation
121 18 to 26 1.05mm 2.10mm
AWG Diameter Diameter
9
Color Options
9 = UL Red
Certification: UL File #E90723
2
Poke Home – Junction Box
Series 9286
18-26 AWG 4 WAY POKE HOME – JUNCTION BOX
SECTION ON A-A
PACKING DETAILS
Pack 400 pieces in a clear plastic bag.
NOTES:
1. 4 WAY WIRE TO WIRE “POKE HOME” CONNECTOR, BUTTON OPERATED.
ALL TERMINALS INTERCONNECTED.
2. WIRE SIZES 18-26 AWG, MAXIMUM INSULATION DIAMETER 2.10MM.
3. SPLIT BUTTON ALLOWS THE WIRES TO BE INSERTED/WITHDRAWN INDEPENDENTLY.
4. INSULATION MATERIAL: NYLON 46, GLASS FILLED, UL94 V-0. COLOR SEE PAGE 1.
5. CONTACT MATERIAL: TIN PLATED COPPER ALLOY.
6. FOR FULL SPECIFICATION REFER TO ELCO SPECIFICATION 201-01-132.
FOR APPLICATION NOTES REFER TO ELCO SPECIFICATION 201-01-135.
7. GENERAL TOLERANCE ±0.20MM.
8. WIRE STRIP LENGTH GUIDE, SEE PAGE 5.
9. ADHESIVE STRIP FOR PANEL MOUNTING REFER TO PAGE 6.
10. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA).
3
Poke Home – Junction Box
Series 9286
18-26 AWG 6 WAY POKE HOME – JUNCTION BOX
SECTION ON A-A
PACKING DETAILS
Pack 400 pieces in a clear plastic bag.
NOTES:
1. 6 WAY WIRE TO WIRE “POKE HOME” CONNECTOR, BUTTON OPERATED.
ALL TERMINALS INTERCONNECTED.
2. WIRE SIZES 18-26 AWG, MAXIMUM INSULATION DIAMETER 2.10MM.
3. SPLIT BUTTON ALLOWS THE WIRES TO BE INSERTED/WITHDRAWN INDEPENDENTLY.
4. INSULATION MATERIAL: NYLON 46, GLASS FILLED, UL94 V-0. COLOR SEE PAGE 1.
5. CONTACT MATERIAL: TIN PLATED COPPER ALLOY.
6. FOR FULL SPECIFICATION REFER TO ELCO SPECIFICATION 201-01-132.
FOR APPLICATION NOTES REFER TO ELCO SPECIFICATION 201-01-135.
7. GENERAL TOLERANCE ±0.20MM.
8. WIRE STRIP LENGTH GUIDE, SEE PAGE 5.
9. ADHESIVE STRIP FOR PANEL MOUNTING REFER TO PAGE 6.
10. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA).
4
Poke Home – Junction Box
Series 9286
18-26 AWG 8 WAY POKE HOME – JUNCTION BOX
NOTES:
1. 8 WAY WIRE TO WIRE “POKE HOME” CONNECTOR, BUTTON OPERATED.
ALL TERMINALS INTERCONNECTED.
2. WIRE SIZES 18-26 AWG, MAXIMUM INSULATION DIAMETER 2.10MM.
3. SPLIT BUTTON ALLOWS THE WIRES TO BE INSERTED/WITHDRAWN INDEPENDENTLY.
4. INSULATION MATERIAL: NYLON 46, GLASS FILLED, UL94 V-0. COLOR SEE PAGE 1.
5. CONTACT MATERIAL: TIN PLATED COPPER ALLOY.
6. FOR FULL SPECIFICATION REFER TO ELCO SPECIFICATION 201-01-132.
FOR APPLICATION NOTES REFER TO ELCO SPECIFICATION 201-01-135.
7. GENERAL TOLERANCE ±0.20MM.
8. WIRE STRIP LENGTH GUIDE, SEE PAGE 5.
9. ADHESIVE STRIP FOR PANEL MOUNTING REFER TO PAGE 6.
10. FOR UL PRODUCT CODES UL REFERENCE E90723 (US AND CANADA).
SECTION ON A-A
PACKING DETAILS
Pack 400 pieces in a clear plastic bag.
5
Poke Home – Thru-Wire
Series 9286
POKE HOME BUTTON ACTIVATION TOOL
NOTES:
1. TOOL IS DOUBLE ENDED, END 1 ACTIVATES SINGLE BUTTON.
END 2 FOR SIMULTANEOUS BUTTON ACTIVATION.
2. WIRE WHEN TRIMMED TO BE STRAIGHT WITH NO BURRS.
3. FOR FULL ASSEMBLY DETAILS REFER TO APPLICATION NOTES 201-01-135.
4. SUPPLIED IN PACKS OF 100 PIECES.
SINGLE BUTTON OPERATION
TRIMMED WIRE
SIMULTANIOUS BUTTON OPERATION
9286 BUTTON ACTIVATION TOOL
06-9286-7001-01-000
6
Poke Home – Thru-Wire
Series 9286
08-9286-400X-00-000 ADHESIVE MOUNTING TAPE
ACCESSORY NOT SUPPLIED WITH CONNECTORS
Matching Connectors
Part Number Dimension “A” 00-9286-00X-021-X06 00-9286-00X-121-X06
Thru Wire Junction Box
80-9286-4001-00-000 4.00 1 Way N/A
80-9286-4002-00-000 8.00 2 Way 4 Way
80-9286-4003-00-000 12.00 3 and 4 Way 6 and 8 Way
80-9286-4006-00-000 24.00 6 and 8 Way N/A
NOTES:
1. DOUBLE SIDED FOAM FILLED ADHESIVE TAPE.
2. WIDTH FOR 1 WAY, 2 WAY, 3 WAY AND 6 WAY CONNECTORS, FOR LENGTH SEE TABLE.
3. USED FOR ADHERE A 9286 CONNECTOR TO A FLAT SURFACE.
4. SOME SURFACES MAY REQUIRE THE USE OF A CLEANING SOLVENT TO ACHIEVE BEST RESULTS.
5. SUPPLIED CUT TO SIZE ON A REEL ON AN OVERSIZE BACKING STRIP PARTS 400 PER REEL.
