SI-B9U26AC10US - SAMSUNG - Datasheet.Directory

Surge Protection Module

Speciﬁcations are subject to change without notice.

Revised: 04/10/18

LED Lighting Surge Protection Module > LSP10

LV UltraMOV™ Series

Description

Features

Agency Approvals

Absolute Maximum Ratings

• For ratings of individual members of a series, see Device Ratings and Speciﬁcations chart

Agency Standard Agency File Number

UL1449 E320116

Note: * = Max. continuous current for series connection.

CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any

other conditions above those indicated in the operational sections of this speciﬁcation is not implied.

LSP10 Module Series

LSP10 Series Units

Continous:

AC Voltage Range (VM(AC)RMS) 150 to 510 V

Continuous Current* 5 A

Transient:

Maximum Discharge Current 8/20μs Waveform (Imax) 20,000 A

Nominal Discharge Current 8/20µs Waveform (In) 10,000 A

Operating Ambient Temperature Range (TA) -45 to +85 °C

Storage Temperature Range (TSTG) -45 to +110 °C

Isolation Voltage Capability (When the thermal disconnect opens) 600 V

Insulation Resistance >1,000 MΩ

• 20kA Maximum

Discharge Current

(Imax)m 8/20us

• Meets ANSI C82.77-5-

2015: Location C High

• Meets ANSI C136.2-

2015: Extreme Level

• Meets IEEE C62.41.2:

Location Category C High

• Meets US Dept.

of Energy MSSLC

Model Spec.

• Parallel or Series

connected options

• Thermally protected

• IP66 rated, dust-tight

and water resistant

• IEC61643-11 Class

II/ EN61643-11 Type

2 Compliant1

• 240Vac and 277Vac parts

are available for Class I

and Class II installation

based on IEC luminaire

protection classes.

Please see details in Part

Numbering System.

• CE Mark - Meets the

requirements of Low

Voltage and RoHS

European Directives.

Applications

• Outdoor and Commercial

LED Lighting

• Roadway lighting

• Trafﬁc lighting

• Digital signage

• Wash wall lighting

• Parking garage/lot lighting

• Flood lighting

• Tunnel lighting

• Street lighting

Notes:

1. Self-declared compliance.

The Littelfuse LSP10 thermally protected Surge Protective

Device is a self-protected device which is specially designed

to be used in outdoor and commercial LED lighting ﬁxtures

for transient overvoltage protection. It is constructed with

Littelfuse thermally protected varistor technology. Its built-in

thermal disconnect function provides additional protection

to prevent catastrophic failure and ﬁre hazard even under

the extreme circumstances of varistor end-of-life or sustain-

ing over voltage conditions. LSP10 series connected option

allows clear indication of thermal fault protection by discon-

necting power to luminaire thereby signally SPD module

replacement. The LSP10 SPD facilitates customer’s product

compliance to IEEE C62.41.2 Location Category C High and

US Dept of Energy MSSLC Model Spec.

RoHS

Additional Information

Datasheet Samples

Resources

Surge Protection Module

Speciﬁcations are subject to change without notice.

Revised: 04/10/18

LED Lighting Surge Protection Module > LSP10

Notes:

1. 5A max. continuous current for series connection.

2. Nominal Discharge Current (In)(A): The nominal discharge current is a measure of the SPDs endurance capability; 15 impulses of discharge current uses the 8/20us current waveform.

3. Maximum Discharge Current (Imax)(A): The maximum discharge current is a measure of the SPDs maximum capability; single impulse of discharge current uses the 8/20us current waveform. All

Devices pass maximum discharge current with possible, safe opening of thermal disconnect.

4. MLV – UL1449 Measured limiting voltage; the highest value of residual voltage measurements during the application of impulses of 8/20us nominal discharge current (In); an average voltage value of

15 impulses.

5. Up – IEC 61643-11 Voltage protection level; the highest value of residual voltage measurements during the application of impulses of 8/20us nominal discharge current (In); a rounding voltage value of

maximum measurement.

6. MCOV/UC: Maximum Continuous Operating Voltage - maximum r.m.s. voltage that could be continuously applied to the SPD.

7. The series modules can be used in parallel connections for the indication circuit connection.

8. * = - P or PM

9. Repetitive Surge Withstanding: 15 strikes at 10,000A (8/20us) with steady MLV/Up.

LSP10 Series Device Ratings & Speciﬁcations

Part Number8

Operating

Voltage

(VAC)

MCOV/Uc

(VAC)6

Maximum

Discharge

Current

(Imax)(A)3

Nominal

Discharge

Current

(In)(A)2

M LV

(V)4

(V)5

Safety Compliance

IEC/EN 61643-117UL1449

LSP10120* 120 150 20,000 10,000

L-N:740

L-G:740

N-G:670

900 X

LSP10240* 240 275 20,000 10,000

L-N:1130

L-G:1130

N-G:1060

1200 X X

LSP10277* 277 320 20,000 10,000

L-N:1330

L-G:1330

N-G:1260

1400 X X

LSP10347* 347 420 20,000 10,000

L-N:1750

L-G:1750

N-G:1680

1900 X

LSP10480* 480 510 20,000 10,000

L-N:2020

L-G:2020

N-G:1960

2100 X

LSP10240LL* L-L:240 L-L:275 20,000 10,000 L-L:1130 L-L:1200 X

L-N/G:120 L-N/G:150 L-N/G:740 L-N/G:900 X

LSP10480LL* L-L:480 L-L:510 20,000 10,000 L-L:2020 L-L:2100 X

L-N/G:277 L-N/G:320 L-N/G:1330 L-N/G:1400 X

Repetitive Surge Capability for LSP10

Figure 1

Pulse Rating

(8x20µSec)

Strikes Surge

1 20,000A

2 15,000A

15 10,000A

100 3,000A

1,000 1,600A

10,000 650A

100,000 400A

1,000,000 240A

Surge Protection Module

Speciﬁcations are subject to change without notice.

Revised: 04/10/18

LED Lighting Surge Protection Module > LSP10

LV UltraMOV™ Series

SPD

N/G

AC/DC

Power

Supply LED Module

Parallel Connection

SPD

N/G

LED Module

LED normally on

Parallel Connection

With LED indicating SPD status

- ON (green): SPD is online

- OFF: SPD needs replacement

LSP10xxxS

AC/DC

Power

Supply

SPD

LED Module

Parallel Connection

(for Class II Unearthed)

AC/DC

Power

Supply

~X3316

SPD

LED Module

Series Connection

(for Class II Unearthed)

~X3316

AC/DC

Power

Supply

SPD

N/G

LED Module

Series Connection

AC/DC

Power

Supply

Notes:

1. Series module used in parallel connection for indication circuit connection.

2. LED indicator and associated circuitry are not included in the module.

3. Black wire is AC line voltage (hot); white wire is AC neutral voltage.

4. Black wire voltage is cut off when SPD needs replacement.

5. R is current limiting resistor; it resistance/wattage is determined by AC line voltage and

desired current driving LED. Example: AC line voltage 240V, LED: 1.6mA, resistor:

150Kohm/0.5W.

Part Numbering System

Device Family

Littelfuse Surge Protection Module

LSP 10 480LL P Xxxxx

Nominal Discharge

Current (ln)

Operating Voltage

Connection mode

LL: for L, L, N/G

Blank: L-N, L-G, N-G

P or S

(P: parallel connection; S: series connection)

Other non-standard option

X3333: with GND wire connection, available

in 240 and 277Vac, CE marked,

Class I installations, earthed

Wire Color: Line: Brown, Neutral: Blue,

Ground/P: Green with yellow stripe

X3316: without GND wire connection, available

in 240 and 277Vac ratings, CE marked

for Class II installations, unearthed

Wire Color: Line: Brown, Neutral: Blue

Dimensions

Notes:

1. Black: Line; White: Neutral; Green: Ground.

(P/N with sufﬁx X3333/X3316: Brown: Line; Blue: Neutral; Green-Yellow stripe: Ground)

2. Wire Gauge: AWG16 wire Line in/out; Wire Length: 100mm or customized.

LSP10XXXXXP

LSP10XXXXXS

56.0 ±0.5

100 ±20 100 ±20

Typical Dimensions (mm)

2x ø4.8±0.2

64.0 ±1.5

6 ±2 6 ±2

2.3 ±0.2

48.7±1.5

49.0±1.5

32.5±1.0

LSP10XXXXXP

LSP10XXXXXS

56.0 ±0.5

100 ±20 100 ±20

Typical Dimensions (mm)

2x ø4.8±0.2

64.0 ±1.5

6 ±2 6 ±2

2.3 ±0.2

48.7±1.5

49.0±1.5

32.5±1.0

Application/Installation Schematic

Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the

suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used

in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics.