Find a Retailer
SHOP LEARN BLOG SUPPORT 0LOG IN REGISTER
PRODUCT MENU
find products, tutorials, etc...
EDUCATION FORUM
Need Help?
HOME / PRODUCT CATEGORIES / POWER ACCESSORIES / RELAY SPDT SEALED
Customer Reviews
images are CC BY 2.0
SHARE
Relay SPDT Sealed
COM-00100 ROHS
2
DESCRIPTION FEATURES DOCUMENTS
These are high quality Single Pole - Double Throw (SPDT) sealed relays. Use
them to switch high voltage, and/or high current devices.
This relay’s coil is rated up to 12V, with a minimum switching voltage of 5V. The
contacts are rated up to 5A (@250VAC, 30VDC).
Note: In the Datasheet below there is a pin layout listed as “Bottom View.” Be
aware, this pin layout is actually the top-down view NOT bottom-up.
Relay SPDT Sealed Product Help and Resources
NO or NC?
last updated about 8 months ago
When the relay is off, the COM (common) pin will be connected to the NC (Normally Closed) pin. When the relay is on, the COM pin will be connected
to the NO (Normally Open) pin.
For a more detailed description about the pin layout and application circuit, check out the SIK Guide in Circuit 13: Relays (pg. 71) or our online SIK
Guide v3.3 [ Experiment 13: Using Relays ].
SparkFun Eagle Part
last updated about 9 months ago
Eagle Part is under the SparkFun-Electromechanical.lbr > Relay SPDT - relay (COM-00101) . The Device is “RELAYPTH4” under the package
RELAY-JZC .
SUPPORT TIPS SKILLS NEEDED
COMMENTS 54 REVIEWS 2
4 out of 5
Based on 2 ratings:
5 star 1
4 star 0
3 star 1
2 star 0
SparkFun Electronics ® / Niwot, Colorado / Customer Service / Site Map / Terms of Service / Privacy Policy
1 of 1 found this helpful:
They work great
about 3 years ago by Member #380634 verified purchaser
I used them for a project I was making with a Raspberry Pi. They worked great. They do not fit tight onto bread
board, so I held them in place and used a little hotglue to hold them tight to the bread board.
I like the sound they make with used, it helped debug my project
1 of 1 found this helpful:
For 5V control of 120V / 5A control for OK - just not perfect
about 11 months ago by Member #216206 verified purchaser
The the pinout is not on 0.1" centers - even though the DS shows multiple of 2.54mm which should be 0.1"
The NC Pin is the worst of the error. I bought 3 - all the same way. Barely works on a protoboard, but on a
breadboard the relay just wants to pop out.
1 star 0
Currently viewing all customer reviews.
START
SOMETHING.
SUBSCRIBE TO NEWSLETTER
SUBSCRIBE TO NEWSLETTER
In 2003, CU student Nate Seidle blew a power supply in his dorm room
and, in lieu of a way to order easy replacements, decided to start his
own company. Since then, SparkFun has been committed to sustainably
helping our world achieve electronics literacy from our headquarters in
Boulder, Colorado.
No matter your vision, SparkFun's products and resources are designed
to make the world of electronics more accessible. In addition to over
2,000 open source components and widgets, SparkFun offers
curriculum, training and online tutorials designed to help demystify the
wonderful world of embedded electronics. We're here to help you start
something.
About Us
About SparkFun
SparkFun Education
Feeds
Jobs
Contact
Help
Customer Service
Shipping
Return Policy
FAQ
Chat With Us
Programs
Become a Community Partner
Community Stories
Custom Kit Requests
Tell Us About Your Project
Sell Your Widget on SparkFun
Become a SparkFun Distributor
Large Volume Sales
Community
Forum
SparkFun IRC Channel
Take the SparkFun Quiz
SparkFun Kickstarter Projects
Distributors
What's on your mind?
For which department?
General
Please include your email address if you'd like us to respond to a
specific question.
SUBMIT
email address
✉
