13.5-17.0/27.0-34.0 GHz Doubler
QFN, 3X3mm
Integrated Gain, Doubler and Driver Stages
Single Positive Supply, +5V
Integrated Bypassing Capacitor
+20.0 dBm Output Saturated Power
35.0 dBc Fundamental Suppression
On-Chip ESD Protection
100% RF, DC and Output Power Testing
3x3 QFN Package
RoHS Compliant
Features
Electrical Characteristics (Ambient Temperature T = 25 oC)
Parameter
Input Frequency Range (fin)
Output Frequency Range (fout)
Input Return Loss (S11)
Output Return Loss (S22)
Fundamental Suppression
RF Input Power (RF Pin)
Output Power at 5.0 dBm Pin (Pout)
Drain Bias Voltage (Vd)
Supply Current (Id1,2,3) (Vd=5.0V Typical)
Units
GHz
GHz
dB
dB
dBc
dBm
dBm
VDC
mA
Min.
13.5
27.0
-
-
-
-
-
-
-
Typ.
-
-
-8.0
-10.0
-35.0
7.0
+20.0
+5.0
200
Max.
17.0
34.0
-
-
-
-
-
+5.5
240
Absolute Maximum Ratings
Supply Voltage (Vd)
Supply Current (Id)
Gate Bias Voltage (Vg)
Input Power (RF Pin)
Storage Temperature (Tstg)
Operating Temperature (Ta)
Channel Temperature (Tch)
+6.0 VDC
300 mA
+0.3 VDC
10 dBm
-65 to +165 OC
-55 to MTTF Table
MTTF Table
Chip Device Layout
Page 1 of 6
1
(1) Channel temperature affects a device's MTTF. It is
recommended to keep channel temperature as low as
possible for maximum life.
1
X1007-QT
Mimix Broadband’s 13.5-17.0 / 27.0-34.0 GHz GaAs MMIC
doubler integrates a gain stage, passive doubler and driver
amplifier onto a single device. The XX1007-QT has a
self-biased architecture requiring a single positive supply
(+5V) only and integrated on-chip bypassing and DC
blocking capacitors eliminating the need for any external
components. This device uses Mimix Broadband’s 0.15um
GaAs PHEMT device model technology, and is based upon
electron beam lithography to ensure high repeatability and
uniformity. XX1007-QT has integrated ESD structures for
protection and comes in a low cost 3x3mm QFN package.
The device is well suited for Millimeter wave Point-to-Point
Radio, LMDS, SATCOM and VSAT applications.
General Description
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
February 2008 - Rev 06-Feb-08
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
February 2008 - Rev 06-Feb-08
Doubler Measurements
Page 2 of 6
13.5-17.0/27.0-34.0 GHz Doubler
QFN, 3X3mm
X1007-QT
XX1007-QT:
Pout at Fin and 2X Fin, Pin = 10 dBm, Vd = 5V
-40
-35
-30
-25
-20
-15
-10
-5
0
5
10
15
20
25
13 13.5 14 14.5 15 15.5 16 16.5 17
Input Frequency (GHz)
Output Power (dBm)
Pout @ Fin
Pout @ 2 X Fin
XX1007-QT:
Pout at Fin and 2X Fin, Pin = 5 dBm, Vd = 5V
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
5
10
15
20
25
13 13.5 14 14.5 15 15.5 16 16.5 17
Input Frequency (GHz)
Output Power (dBm)
Pout @ Fin
Pout @ 2 X Fin
XX1007-QT:
Pout at Fin and 2X Fin, Pin = 0dBm, Vd = 5V
-35
-30
-25
-20
-15
-10
-5
0
5
10
15
20
25
13 13.5 14 14.5 15 15.5 16 16.5 17
Input Frequency (GHz)
Output Power (dBm)
Pout @ Fin
Pout @ 2 X Fin
XX1007-QT:
Pout at Fin and 2X Fin, Pin = 3 dBm, Vd = 5V
-35
-30
-25
-20
-15
-10
-5
0
5
10
15
20
25
13 13.5 14 14.5 15 15.5 16 16.5 17
Input Frequency (GHz)
Output Power (dBm)
Pout @ Fin
Pout @ 2 X Fin
XX1007-QT:
Pout Vs Pin, Vd = 5V, Input Frequency = 14.5 GHz
15
16
17
18
19
20
21
22
01234567891011
Pin (dBm)
Pout (dBm)
Pout
XX1007-QT:
Pout Vs Pin, Input Frequency = 14.5 GHz
15
16
17
18
19
20
21
22
23
01234567891011
Pin (dBm)
Pout (dBm)
Pout @ 5V
Pout @ 4V
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
February 2008 - Rev 06-Feb-08
Doubler Measurements (cont.)
Page 3 of 6
13.5-17.0/27.0-34.0 GHz Doubler
QFN, 3X3mm
X1007-QT
XX1007-QT:
Input Return Loss (S11)
-18
-16
-14
-12
-10
-8
-6
-4
-2
0
5 10152025303540
Frequency (GHz)
Return Loss (dB)
S11 @ 4V
S11 @ 5V
XX1007-QT: Idd Vs Pin, Input Frequency = 14.5 GHz
100
125
150
175
200
225
250
012345678910
Pin (dBm)
Current, Idd (mA)
Idd @ 4V
Idd @ 5V
XX1007-QT:
Idd Vs Input Frequency, Vd = 5V
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
13 13.5 14 14.5 15 15.5 16 16.5 17
Input Frequency (GHz)
Current, Idd (mA)
Idd @ Pin = 10dBm
Idd @ Pin = 5dBm
Idd @ Pin = 0dBm
XX1007-QT:
Input Return Loss (S22)
-18
-16
-14
-12
-10
-8
-6
-4
-2
0
5 10152025303540
Frequency (GHz)
Return Loss (dB)
S22 @ 4V
S22 @ 5V
XX1007-QT:
Input Return Loss (S11)
-18
-16
-14
-12
-10
-8
-6
-4
-2
0
13 13.5 14 14.5 15 15.5 16 16.5 17
Frequency (GHz)
Return Loss (dB)
S11 @ 4V
S11 @ 5V
XX1007-QT:
Input Return Loss (S22)
-18
-16
-14
-12
-10
-8
-6
-4
-2
0
27 28 29 30 31 32 33 34
Frequency (GHz)
Return Loss (dB)
S22 @ 4V
S22 @ 5V
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
February 2008 - Rev 06-Feb-08
XX1007-QT
wwwwwww
PxxxxG
Top View
Functional Block Diagram Pin Designation
Physical Dimensions
Page 4 of 6
13.5-17.0/27.0-34.0 GHz Doubler
QFN, 3X3mm
X1007-QT
Pin Number Function Typ. Value Unit
3RF in5dBm
10 RF out 20 dBm
13 Vd 5 V
NC
NC
1,2,4,5,6,7,8,9
11,12,14,15,16
NC: No Connection
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
February 2008 - Rev 06-Feb-08
RF in
Vd
RF out
Page 5 of 6
MTTF Tables (TBD)
Evaluation Board Layout
Bias Conditions: Vd=5.0V, Id=200mA
These numbers were calculated based on accelerated life test information and thermal model analysis received from the fabricating foundry.
Backplate
Temperature
75 deg Celsius
Channel
Temperature
192 deg Celsius
FITs
2.9 E+02
MTTF Hours
3.4 E+06
Rth
126 C/W
13.5-17.0/27.0-34.0 GHz Doubler
QFN, 3X3mm
X1007-QT
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Characteristic Data and Specifications are subject to change without notice. ©2008 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.
February 2008 - Rev 06-Feb-08
Page 6 of 6
13.5-17.0/27.0-34.0 GHz Doubler
QFN, 3X3mm
X1007-QT
Handling and Assembly Information
Ordering Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the
environment. For safety, observe the following procedures:
Do not ingest.
Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these
by-products are dangerous to the human body if inhaled, ingested, or swallowed.
Observe government laws and company regulations when discarding this product. This product must be discarded in
accordance with methods specified by applicable hazardous waste procedures.
Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or
systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life
support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain
life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or
system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its
safety or effectiveness.
Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible
with high volume solder installation. The package is a low-cost plastic package. Vacuum tools or other suitable pick and place
equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder
connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF
performance degradation, but reduced reliability and life of the product due to thermal stress.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant
components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is
100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as
well as higher temperature (260°C reflow) “Pb Free” processes.
Part Number for Ordering Description
XX1007-QT-0G00 Matte Tin plated RoHS compliant QFN 3x3 16L surface mount package in bulk quantity
XX1007-QT-0G0T Matte Tin plated RoHS compliant QFN 3x3 16L surface mount package in tape and reel
XX1007-QT-EV1 XX1007-QT Evaluation Board
We also offer this part with alternative plating. Please contact your regional sales manager for more information regarding different
plating types.
Typical Reflow Profiles
Reflow Profile
Ramp Up Rate
Activation Time and Temperature
Time Above Melting Point
Max Peak Temperature
Time Within 5 ºC of Peak
Ramp Down Rate
SnPb
3-4 ºC/sec
60-120 sec @ 140-160 ºC
60-150 sec
240 ºC
10-20 sec
4-6 ºC/sec
Pb Free
3-4 ºC/sec
60-180 sec @ 170-200 ºC
60-150 sec
265 ºC
10-20 sec
4-6 ºC/sec
Caution: ESD Sensitive
Appropriate precautions in handling, packaging
and testing devices must be observed.
Proper ESD procedures should be followed when handling this device.
