Preliminary THC63LVDF84B/THC63LVDF64B Rev.0.90 THine THC63LVDF84B/THC63LVDF64B LVDS 24Bit/18Bit COLOR HOST-LCD PANEL INTERFACE RECEIVER General Description Features The THC63LVDF84B/THC63LVDF64B receiver supports wide VCC range(2.5~3.6V). At single 2.5V supply, the THC63LVDF84B/THC63LVDF64B reduces EMI and power consumption. The THC63LVDF84B receiver convert the four LVDS(Low Voltage Differential Signaling) data streams back into 28bits of CMOS/TTL data with falling edge clock. At a transmit clock frequency of 85MHz, 28bits of RGB data and 4bits of LCD timing and control data (HSYNC, VSYNC, CNTL1, CNTL2) are transmitted at a rate of 2.3Gbps. Also the THC63LVDF64B receiver convert the three LVDS data streams back into 21bits of CMOS/TTL data with falling edge clock. At a transmit clock frequency of 85MHz, 21bits of RGB data and 4bits of LCD timing and control data (HSYNC, VSYNC, CNTL1, CNTL2) are transmitted at a rate of 1.78Gbps. * Wide VCC range: 2.5~3.6V * Wide dot clock range: 20-85MHz suited for VGA, SVGA, XGA and SXGA (VCC=3.0~3.6V) * Wide dot clock range: 20-70MHz suited for VGA, SVGA, XGA and SXGA (VCC=2.5V~3.6V) * PLL requires No external components * Rx power consumption < 80mW @VCC 2.5V, 65MHz Grayscale * Power-Down Mode * Low profile 56 Lead or 48 Lead TSSOP Package * Pin compatible with THC63LVDF84A/F64A Block Diagram THC63LVDF84B THC63LVDF64B RB +/DATA (LVDS) RC +/RD +/- CLOCK (LVDS) RCLK +/20 to 85MHz PLL 7 7 7 7 CMOS/TTL OUTPUT RA0-6 RA +/RB0-6 DATA (LVDS) RB +/- RC0-6 RC +/RD0-6 RECEIVER CLOCK OUT (20 to 85MHz) CLOCK (LVDS) RCLK +/20 to 85MHz /PDWN LVDS TO TTL PARALLEL RA +/- LVDS TO TTL PARALLEL CMOS/TTL OUTPUT PLL 7 7 7 RA0-6 RB0-6 RC0-6 RECEIVER CLOCK OUT (20 to 85MHz) /PDWN (140-595Mbit/On Each LVDS Channel) Copyright 2001 THine Electronics, Inc. All rights reserved 1 THine Electronics, Inc. Preliminary THC63LVDF84B/THC63LVDF64B Rev.0.90 THine Pin Out THC63LVDF84B RC3 RD6 RC4 GND RC5 RC6 RD0 LVDSGND RARA+ RBRB+ LVDSVCC LVDSGND RCRC+ RCLKRCLK+ RDRD+ LVDSGND PLLGND PLLVCC PLLGND /PDWN CLKOUT RA0 GND 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 THC63LVDF64B VCC RC2 RC1 RC0 GND RB6 RD5 RD4 VCC RB5 RB4 RB3 GND RB2 RD3 RD2 VCC RB1 RB0 RA6 GND RA5 RD1 RA4 RA3 VCC RA2 RA1 RC3 RC4 GND RC5 RC6 N/C LVDSGND RARA+ RBRB+ LVDSVCC LVDSGND RCRC+ RCLKRCLK+ LVDSGND PLLGND PLLVCC PLLGND /PDWN CLKOUT RA0 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 VCC RC2 RC1 RC0 GND RB6 VCC RB5 RB4 RB3 GND RB2 VCC RB1 RB0 RA6 GND RA5 RA4 RA3 VCC RA2 RA1 GND THine Electronics, Inc. THC63LVDF84B/THC63LVDF64B Rev.0.90 Preliminary THine THC63LVDF84B Pin Description Pin Name Pin # Type Description RA+, RA- 9, 10 LVDS IN RB+, RB- 11, 12 LVDS IN RC+, RC- 15, 16 LVDS IN RD+, RD- 19, 20 LVDS IN RCLK+, RCLK- 17, 18 LVDS IN RA0~RA6 27,29,30,32,33,35,37 OUT RB0~RB6 38,39,43,45,46,47,51 OUT RC0~RC6 53,54,55,1,3,5,6 OUT RD0~RD6 7,34,41,42,49,50,2 OUT CLKOUT 26 OUT /PDWN 25 IN VCC 31,40,48,56 Power Power Supply Pins for TTL outputs and digital circuitry GND 28,36,44,52 Ground Ground Pins for TTL outputs and digital circuitry LVDSVCC 13 Power Power Supply Pin for LVDS inputs LVDSGND 8,14,21 Ground Ground Pins for LVDS inputs PLLVCC 23 Power Power Supply Pin for PLL circuitry PLLGND 22,24 Ground Ground Pins for PLL circuitry LVDS Data Inputs LVDS Clock Inputs Pixel Data Outputs Pixel Clock Output H: Normal operation L: Power down ( all output are Hi-Z ) THC63LVDF64B Pin Description Pin name Pin # Type RA+, RA- 8,9 LVDS IN RB+, RB- 10,11 LVDS IN RC+, RC- 14,15 LVDS IN RCLK+, RCLK- 16,17 LVDS IN RA0~RA6 24,26,27,29,30,31,33 OUT RB0~RB6 34,35,37,39,40,41,43 OUT RC0~RC6 45,46,47,1,2,4,5 OUT CLKOUT 23 OUT /PDWN 22 IN VCC 28,36,42,48 Power GND 3,25,32,38,44 Ground LVDSVCC 12 Power LVDSGND 7,13,18 Ground PLLVCC 20 Power PLLGND 19,21 Ground Description LVDS Data Inputs LVDS Clock Inputs Pixel Data Outputs Pixel Clock Output H: Normal operation L: Power down ( all output are Hi-Z ) Power Supply Pins for TTL outputs and digital circuitry Ground Pins for TTL outputs and digital circuitry Power Supply Pin for LVDS inputs Ground Pins for LVDS inputs Power Supply Pin for PLL circuitry Ground Pins for PLL circuitry 3 THine Electronics, Inc. Preliminary THC63LVDF84B/THC63LVDF64B Rev.0.90 THine Electrical Characteristics CMOS/TTL DC SPECIFICATIONS VCC = 2.5V ~ 3.6V, Ta = -10 C ~ +70 C Symbol Parameter Conditions Min. Typ. Max. Units V IH High Level Input Voltage 2.0 VCC V V IL Low Level Input Voltage GND 0.8 V VOH1 High Level Output Voltage V OL1 Low Level Output Voltage VOH2 High Level Output Voltage V OL2 Low Level Output Voltage IIN VCC= 3.0V ~ 3.6V I OH = -4mA 2.4 V VCC = 3.0V ~ 3.6V 0.4 I OL = 4mA V VCC= 2.5V ~ 3.6V 2.1 I OH = -2mA V VCC = 2.5V ~ 3.6V I OL = 2mA 0V VIN V C C Input Current 0.4 V 10 uA LVDS RECEIVER DC SPECIFICATIONS VCC = 2.5V ~ 3.6V, Ta = -10 C ~ +70 C Symbol Parameter Conditions V TH Differential Input High Threshold VTL Differential Input Low Threshold I IN Input Current Min. Typ. Max. Units 100 mV VOC = +1.2V -100 V IN = +2.4V/0V VCC = 3.6V mV 10 uA Absolute Maximum Ratings1 Supply Voltage (Vcc) CMOS/TTL Input Voltage CMOS/TTL Output Voltage LVDS Receiver Input Voltage Junction Temperature Storage Temperature Range Lead Temperature (Soldering, 4sec.) Maximum Power Dissipation@25 C -0.3 to +4V -0.3 to (Vcc + 0.3V) -0.3V to (Vcc + 0.3V) -0.3V to (Vcc + 0.3V) +150 C -65 C to +150 C +260 C 1.4W 1. "Absolute Maximum Ratings" are those valued beyond which the safety of the device can not be guaranteed. They are not meant to imply that the device should be operated at these limits. The tables of "Electrical Characteristics" specify conditions for device operation. 4 THine Electronics, Inc. THC63LVDF84B/THC63LVDF64B Rev.0.90 Preliminary THine Supply Current VCC = 2.5V ~ 3.6V, Ta = -10 C ~ +70 C Symbol IRCCG IRCCW IRCCS Parameter Receiver Supply Current 16Grayscale Pattern Receiver Supply Current Worst Case Pattern Receiver Power Down Supply Current Condition(*) CL=8pF, VCC=3.3V CL=8pF, VCC=2.5V CL=8pF, VCC=3.3V CL=8pF, VCC=2.5V /PDWN = L Typ. Max. Units f = 65MHz 41 53 mA f = 85MHz 52 64 mA f = 65MHz 30 42 mA f = 65MHz 72 94 mA f = 85MHz 84 96 mA f = 65MHz 42 64 mA 10 A 16 Gray Scale Pattern CLKIN Rx0 Rx1 Rx2 Rx3 Rx4 Rx5 Rx6 Worst Case Pattern CLKIN EVEN RxIN ODD RxIN 5 THine Electronics, Inc. Preliminary THC63LVDF84B/THC63LVDF64B Rev.0.90 THine Switching Characteristics VCC= 2.5V ~ 3.6V, Ta = -10 C ~ +70C Symbo l Min. Typ. Max. Unit s VCC = 3.0 - 3.6V 11.76 T 50.0 ns VCC = 2.5 - 3.6V 14.28 T 50.0 ns Parameter tRCP CLK OUT Period tRCH CLK OUT High Time 4T/7 ns tRCL CLK OUT Low Time 3T/7 ns tRCD RCLK +/- to CLK OUT Delay 5T/7 ns tR S TTL Data Setup to CLK OUT 3T/7-2.5 ns tRH TTL Data Hold from CKL OUT 4T/7-3.5 ns tTLH TTL Low to High Transition Time 3.0 5.0 ns tTHL TTL High to Low Transition Time 3.0 5.0 ns tRIP1 Input Data Position0 (T = 11.76ns) -0.4 0.0 0.4 ns tRIP0 Input Data Position1 (T = 11.76ns) T/7-0.4 T/7 T/7+0.4 ns tRIP6 Input Data Position2 (T = 11.76ns) 2T/7-0.4 2T/7 2T/7+0.4 ns tRIP5 Input Data Position3 (T = 11.76ns) 3T/7-0.4 3T/7 3T/7+0.4 ns tRIP4 Input Data Position4 (T = 11.76ns) 4T/7-0.4 4T/7 4T/7+0.4 ns tRIP3 Input Data Position5 (T = 11.76ns) 5T/7-0.4 5T/7 5T/7+0.4 ns tRIP2 Input Data Position6 (T = 11.76ns) 6T/7-0.4 6T/7 6T/7+0.4 ns tRPLL Phase Lock Loop Set 10.0 ms AC Timing Diagrams TTL Output 80% 80% 8pF TTL Output 20% 20% TTL Output Load tTLH 6 tTHL THine Electronics, Inc. Preliminary THC63LVDF84B/THC63LVDF64B Rev.0.90 THine AC Timing Diagrams tRIP2 tRIP3 tRIP4 tRIP5 tRIP6 tRIP0 t RIP1 Rx+/- Rx6 Rx5 Rx4 Rx3 Rx2 RCLK+ Rx1 Rx0 Vdiff = 0V Vdiff = 0V tRCD tRCH t RCP CLKOUT tRCL VCC/2 VCC/2 VCC/2 tR S VCC/2 Rx0 - Rx6 VCC/2 tRH DATA VALID VCC/2 Note: 1) Vdiff = (RA+) - (RA-), ...... (RCLK+) - (RCLK-) 7 THine Electronics, Inc. THC63LVDF84B/THC63LVDF64B Rev.0.90 Preliminary THine AC Timing Diagrams Phase Lock Loop Set Time /PDWN VCC/2 3.6V VCC VCC/2 t RPLL RCLK+/- CLKOUT VCC/2 8 THine Electronics, Inc. Preliminary THC63LVDF84B/THC63LVDF64B Rev.0.90 THine Package 56 Lead Molded Thin Shrink Small Outline Package, JEDEC Unit : millimeters 14.0 0.1 56 29 8.1 0.1 6.1 0.1 4.05 1 28 (1.0) 1.2 MAX 0.50 TYP 0.10 0.05 0.20 TYP 48 Lead Molded Thin Shrink Small Outline Package, JEDEC Unit : millimeters 12.5 0.1 48 25 8.1 0.1 6.1 0.1 4.05 1 24 (1.0) 1.2 MAX 0.50 TYP 0.20 TYP 9 0.10 0.05 THine Electronics, Inc. THC63LVDF84B/THC63LVDF64B Rev.0.90 Preliminary THine Notes to Users: 1. The contents of this data sheet are subject to change without prior notice. 2. Circuit diagrams shown in this data sheet are examples of application. Therefore, please pay sufficient attention when designing circuits. Even if there are incorrect descriptions, we are not responsible for any problem due to them. Please note that incorrect descriptions sometimes cannot be corrected immediately if found. 3. Our copyright and know-how are included in this data sheet. Duplication of the data sheet and disclosure to other persons are strictly prohibited without our permission. 4. We are not responsible for any problems of industrial proprietorship occurring during THC63LVDF84B/ THC63LVDF64B use, except for those directly related to THC63LVDF84B/THC63LVDF64B's structure, manufacture or functions. THC63LVDF84B/THC63LVDF64B is designed on the premise that it should be used for ordinary electronic devices. Therefore, it shall not be used for applications that require extremely high-reliability (space equipment, nuclear control equipment, medical equipment that affects people's lives, etc.). In addition, when using THC63LVDF84B/THC63LVDF64B for traffic signals, safety devices and control/safety units in transportation equipment, etc., appropriate measures should be taken. 5. We are making the utmost effort to improve the quality and reliability of our products. However, there is a very slight possibility of failure in semiconductor devices. To avoid damage to social or official organizations, much care should be taken to provide sufficient redundancy and fail-safe design. 6. No radiation-hardened design is incorporated in THC63LVDF84B/THC63LVDF64B. 7. Judgment on whether THC63LVDF84B/THC63LVDF64B comes under strategic products prescribed by the Foreign Exchange and Foreign Trade Control Law is the user's responsibility. 8. This technical document was provisionally created during development of THC63LVDF84B/THC63LVDF64B, so there is a possibility of differences between it and the product's final specifications. When designing circuits using THC63LVDF84B/THC63LVDF64B, be sure to refer to the final technical documents. THine Electronics, Inc. Matsuda Yaesudori Bldg. 6F 1-10-7, Hatchobori, Chuo-ku, Tokyo, 104-0032 Japan Tel: 81-3-3555-0666 Fax: 81-3-3555-0677 10 THine Electronics, Inc.