FEATURES
- Rating to 1000V PRV
- Ideal for printed circuit board
- Reliable low cost construction utilizing molded plastic
technique results in inexpensive product
- Lead tin plated copper
MECHANICAL DATA
- Polarity:Symbol molded on body
- Weight: 0.0044 ounces,0.125 grams
- Mounting position :Any
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave ,60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
CHARACTERISTICS SYMBOL MB05M MB1M MB2M MB4M MB6M MB8M MB10M UNIT
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward
Rectified Current (Note 1) @TA=40 ℃
Peak Forward Surge Current
8.3ms Single Half Sine-Wave
Super Imposed on Rated Load(JEDEC Method)
Peak Forward Voltage at 0.8A DC VFV
Maximum DC Reverse Current @TJ=25℃
at Rated DC Bolcking Voltage @TJ=125℃
Typical Junction Capacitance Per Element (Note2) CJpF
Typical Thermal Resistance (Note3) RθJC ℃/W
Operating Temperature Range TJ℃
Storage Temperature Range TSTG ℃
IFSM A
Dimensions in inches and (millimeters)
0.8
REVERSE VOLTAGE - 50 to 1000 V
FORWARD CURRENT - 0.8 A
μA
AI(AV)
3.Thermal resistance junction to case.
NOTES:1.Mounted on P.C. board.
2.Measured at1.0MHz and applied reverse voltage of 4.0V DC.
IR
30
75
-55 to +150
-55 to +150
1.1
5.0
500
15
MBM
.019(0.5)
.031(0.8)
.006(.15)
.014(.35)
.177(4.5)
.217(5.5)
.217(5.5)
.256(6.5)
.035(0.9)
.051(1.3)
.146(3.7)
.165(4.2)
.090(2.3)
.106(2.7)
.090(2.3)
.106(2.7)
.177(4.5)
.193(4.9)
.019(0.5)
.031(0.8)
.106(2.7)
.090(2.3)
+
-
~ ~
C0.5
Glass Passivated Bridge Rectifiers
MB05M-G thru MB10M-G
"-G" : RoHS Device
MDS0912009A Page 1
INSTANTANEOUS REVERSE CURRENT,(µA)
PERCENT OF RATED PEAK REVERSE VOLTAGE，(%)
FIG.3-TYPICAL REVERSE CHARACTERISTICS
140
0.01
0.1
020 40 60 80 100 120
1.0
10
100
TJ=125°C
TJ=25°C
14 10 100
100
10
1.0
REVERSE VOLTAGE， VOLTS
CAPACITANCE(PF)
FIG.5-TYPICAL JUNCTION CAPACITANCE
TJ=25°C，f=1MHZ
AVERAGE FORWARD CURRENT
AMPERES
FIG.1-FORWARD CURRENT DERATING CURVE
AMBIENT TEMPERATURE, ℃
1.0
0.8
0.6
0.4
0.2
0.1
20 40 60 100 120 140 160
80
MOUNTED ON BOARD
SINGLE PHASE HALF WAVE 60Hz
RESISTIVE OR INDUCTIVE LOAD
NUMBER OF CYCLES AT 60HZ
PEAK FORWARD SURGE CURRENT
AMPERES
FIG.2-MAXIMUM NON-REPETITVE
SURGE CURRENT
40
30
20
10
0
1 2 5 10 20 50 100
PULSE WIDTH 8.3ms
SINGLE HALF-SINE-WAVE
(JEDEC METHOD)
0.01
0.1
1.0
10
INSTANTANEOUS FORWARD VOLTAGE,VOLTS
INSTANTANEOUS FORWARD CURRENT,(A)
FIG.4-TYPICAL FORWARD CHARACTERISTICS
TJ=25°C
PULSE WIDTH:300us
2% DUTY CYCLE
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8
Silicon Bridge Rectifiers
RATINGS AND CHARACTERISTIC CURVES
MB05M-G thru MB10M-G
MDS0912009A Page 2
