Hand Tools Sargent Quality Tools
2926
SARGENT QUALITY TOOLS Crimp Tools and Dies
INTERCHANGEABLE DIES (4100 SERIES TOOLS)
• For use with 4100 and 4200 series crimp tool
• All die sets interlock to assure alignment
• Mounted to frame or moveable jaw with single screw
O.E.M. COMPATIBLE CRIMP TOOLS
• Exacting crimps produced by these tools conform to
allcommercialspecications
• Conductor and insulation crimps conform to O.E.M.
specs and are produced in one tool closure
• Locator and wire stop are provided to orient the pins
or sockets (excluding part no. 624-3135CT)
8700 SERIES STRIP TOOL
• The stripper body is one piece construction incorporating a molded-in living hinge
• Replacement cartridges can be purchased separately
INTERCHANGEABLE DIES (2100 SERIES TOOLS)
Modular Plug Crimp
• For use with 2100 series crimp tool
• All die sets interlock to assure perfect alignment
• Mounted to frame or moveable jaw with single screw
Coax Crimps
• RJ45, 8 position keyed or non-keyed plugs
• Crimps conductor and primary strain relief of AMP
andStewartcongurationmodularplugsin
one crimp cycle
• Crimps the center pin to a .068 hex, the
RG174 ferrule to a .178 hex and the
8281 ferrule to a .324 hex
• Crimps the center pin to a .042 or .068 hex,
RG58 ferrule to a .190 hex and the RG59
ferrule to a .213 hex on plenum coaxial cable
• Crimps the center pin to a .042
square or .068 hex
• The ferrule on a small coaxial cable
to a .100 and .128 hex and the
RG174 ferrule to a .178 or .213 hex
D-Sub, Open Barrel Crimps
• Crimps high density D-subminiature
pin and socket open barrel contacts
• Crimps in two cavities: A 26-22AWG
and B 30-28AWG
• Crimps D-subminiature open barrel contacts
• Crimps in two cavities: Front 30-26AWG
and rear 24-20AWG
4200 AND 4100 SERIES CRIMP TOOLS
• Molded cushion grips minimize user fatigue
• All working components are heat treated
• Positive ratcheting assembly
• Tool life is conservatively rated at 50,000 cycles
Tool frame only. Die set not included. Optional
interchangeable die sets are listed below.
For quantities greater than listed, call for quote.
MOUSER
STOCK NO. Fig. Description Price Each
1 5
624-4200 ASuper Ergonomic: 11.5" long for two handed crimping,
utilizes 4100 series dies, designed to achieve UL
tensile requirements
79.72 73.34
624-4100 BSuper Crimp: meet or exceed all UL tensile
requirements, interlocking die sets are easily
interchanged
67.49 62.99
Insulated Terminal Crimp
• Produced in three cavities: Red 22-16AWG, Blue 16-14AWG, and Yellow 12-10AWG
For quantities greater than listed, call for quote.
MOUSER
STOCK NO. Fig. Price Each
1 5
624-4100-40 E41.52 38.22
For quantities greater than listed, call for quote.
MOUSER
STOCK NO. O.E.M. Fig. Description Price Each
1 5
624-3127CT AMP 90312 D D-sub Pins and Sockets
Crimps: 28-24AWG and 24-20AWG
124.60 112.14
624-3131CT AMP 90277 DMultimate Pins and Sockets
Crimps: 28-24AWG, 24-20AWG and
18-16AWG
124.61 112.13
624-3132CT Molex 1031E D.093 Power Pins and Sockets
Crimps: 24-20AWG and 18-14AWG
133.22 119.86
624-3133CT Molex 1719C D.062 Power Pins and Sockets
Crimps: 24-20AWG and 18AWG
133.22 119.86
624-3135CT Molex 2262A D.100 Interconnection System
Crimps: 30-28AWG and 26-24AWG
137.17 123.40
624-3136CT Molex 2445A D.156 Interconnection System
Crimps: 26-22AWG and 30-24AWG
133.22 119.86
624-3137CT Raychem
AD1377
DCommercial Grade Butt Splices
Crimps: 26-20AWG, 20-16AWG
and 16-12AWG
124.60 112.14
2100 SERIES SUPER CRIMP TOOL
• Multi purpose frame
• Compact lightweight design
• Tool life conservatively rated at 50,000 cycles
Tool frame only. Die set not included. Optional
interchangeable die sets are listed below.
For quantities greater than listed, call for quote.
MOUSER
STOCK NO. Fig. Description Price Each
1 5
624-2100 CSuper Crimp Frame; supplied complete with die
mounting screws, standard dies available
for most popular product applications
59.91 55.12
MOUSER
STOCK NO. Fig. Price Each
1 5
624-2100-52 J41.34 38.03
MOUSER
STOCK NO. Fig. Price Each
1 5
624-2100-54 K41.34 38.03
MOUSER
STOCK NO. Fig. Price Each
1 5
624-2100-65 L41.34 38.03
For quantities greater than listed, call for quote.
MOUSER
STOCK NO. Fig. Description Price Each
1 5
624-8740ES MStripper Body with RG6/59 and Twisted Pair
cartridge
22.27 20.48
MOUSER
STOCK NO. Fig. Price Each
1 5
624-2100-08 F41.34 38.03
MOUSER
STOCK NO. Fig. Price Each
1 5
624-2100-24 G71.98 66.23
MOUSER
STOCK NO. Fig. Price Each
1 5
624-2100-27 H72.00 66.23
mouser.com/sargent (800) 346-6873
© Copyright 2016 Mouser Electronics
© Copyright 2016 Mouser Electronics
A B C D
E F G H I
J K L M
Insulated Terminal Crimp
• Crimps conductor and strain portion of
terminals and splices
MOUSER
STOCK NO. Fig. Price Each
1 5
624-2100-42 I41.34 38.03
• Crimps in two cavities: Red 22-18
AWG and Blue 16-14AWG