ALUMINUM ELECTROLYTIC CAPACITORS High Temperature Range, For +125C Use UBT Highly dependable reliability withstanding load life of 2000 to 10000 hours at +125C. Suited for automobile electronics where heavy duty services are indispensable. Compliant to the RoHS directive (2011/65/EU). UBW Values marked with an in the dimension table are scheduled to be discontinued and are not recommended for new designs. High Temperature UBT Specifications Higher Capacitance UBY Performance Characteristics Item Category Temperature Range -40 to +125C (10 to 250V), -25 to +125C (350 to 450V) Rated Voltage Range 10 to 450V Rated Capacitance Range 1 to 4700F 20% at 120Hz, 20C Capacitance Tolerance Rated Voltage (V) Leakage Current 10 to 100 160 to 450 CV < = 1000 : I = 0.1CV+40 (A) max. CV > 1000 : I = 0.04CV+100 (A) max. After 1 minute's application of rated voltage at 20C, leakage Leakage current current is not more than 0.03CV or 4 (A), whichever is greater. Rated voltage (V) tan (MAX.) Tangent of loss angle (tan ) 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 63 0.10 80 0.08 100 0.08 160 to 250 350 to 450 120Hz, 20C 0.20 0.24 For capacitance of more than 1000F, add 0.02 for every increase of 1000F. 120Hz Rated voltage (V) Z- 25C / Z+20C Impedance ratio Stability at Low Temperature ZT / Z20 (MAX.) 10 3 4 Z- 40C / Z+20C 16 2 4 The specifications listed at right shall be met when the capacitors are restored to 20C after D.C. bias plus rated ripple current is applied for less than 50V (D = > 12.5 : 8 : 2000 hours, D = 10 : 5000 hours, D = 10000 hours), 63 to 100V (D = 8 : 2000 hours, D = > 12.5 : 5000 hours), more than 10 : 3000 hours, D = 160V (2000 hours) at 125C, the peak voltage shall not exceed the rated voltage. Endurance 25 2 4 35 2 4 50 2 4 63 2 4 80 2 4 100 2 4 160 to 250 350 to 450 3 6 6 - Capacitance change Within 30% of the initial capacitance value (10 to 100V) Within 20% of the initial capacitance value (160 to 450V) Dissipation Factor 300% or less than the initial specified value (10 to 100V) 200% or less than the initial specified value (160 to 450V) Leakage current Less than or equal to the initial specified value After storing the capacitors under no load at 125C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Shelf Life Printed with white color letter on blue sleeve. Marking Radial Lead Type Type numbering system (Example : 10V 220F) Sleeve (P.E.T) or Sleeve (polyolefin) d 1 2 3 4 5 6 7 8 9 10 11 12 D+ P0.5 MAX. UB T 1 A 2 2 1 MPD 8 Pressure relief vent L + 2 MAX. 15 MIN 4 MIN polyolefin sleeve product is also available upon request. Configuration Standard type (mm) D 8 10 12.5 16 18 D Pb-free leadwire Pb-free PET sleeve Semi-standard type Pb-free leadwire Pb-free Polyolefin sleeve 0.8 0.8 1.0 1.0 1.0 8 ,10 PD8 PD P 3.5 5.0 5.0 7.5 7.5 12.5 to 18 HD8 HD d 0.6 0.6 0.6 0.8 0.8 * Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. 252 CAT.8100F ALUMINUM ELECTROLYTIC CAPACITORS UBT Dimensions 10 (1A) V (Code) Item Co Cap.. (F) 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 de Case size D x L (mm) Item Co 4.7 10 22 33 47 100 220 330 470 Impedance Rated ripple () MAX. (mArms) 010 2R2 3R3 4R7 100 220 330 470 101 221 8 x 11.5 331 10 x 12.5 471 10 x 12.5 102 10 x 20 222 12.5 x 25 332 16 x 25 472 16 x 31.5 de 0.26 0.15 0.10 0.057 0.033 0.024 0.020 Case size D x L (mm) Case size D x L (mm) Case size D x L (mm) 0.32 0.15 0.10 0.075 0.042 0.024 0.020 0.018 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 25 16 x 31.5 18 x 31.5 340 620 680 945 1490 2300 2710 3270 80 (1K) Impedance Rated ripple () MAX. (mArms) 4R7 100 220 8 x 11.5 330 8 x 11.5 470 10 x 12.5 101 10 x 16 221 12.5 x 20 331 12.5 x 25 471 12.5 x 31.5 25 (1E) Impedance Rated ripple () MAX. (mArms) 8 x 11.5 10 x 12.5 10 x 12.5 10 x 16 12.5 x 20 16 x 25 16 x 31.5 18 x 31.5 340 620 680 1100 1750 2300 2710 63 (1J) V(Code) Cap.. (F) 16 (1C) 2.00 1.50 0.59 0.41 0.16 0.12 0.097 130 150 530 690 1050 1290 1460 Case size D x L (mm) 1.50 0.80 0.80 0.39 0.18 0.16 0.11 Impedance Rated ripple () MAX. (mArms) 0.13 0.10 0.075 0.057 0.033 0.020 0.017 500 680 945 1100 1750 2710 3310 Case size D x L (mm) 10 x 12.5 10 x 16 10 x 20 12.5 x 20 16 x 25 18 x 35.5 50 (1H) Impedance Rated ripple () MAX. (mArms) 0.15 0.094 0.075 0.058 0.031 0.025 620 790 950 1330 2010 2790 Case size D x L (mm) 8 x 11.5 8 x 11.5 8 x 11.5 8 x 11.5 8 x 11.5 8 x 11.5 8 x 11.5 8 x 11.5 10 x 12.5 10 x 20 12.5 x 20 12.5 x 25 16 x 31.5 Impedance Rated ripple () MAX. (mArms) 2.00 1.80 1.50 1.15 0.75 0.50 0.45 0.35 0.18 0.098 0.070 0.055 0.031 35 50 60 85 180 250 300 440 555 930 1330 1650 2430 100 (2A) Case size D x L (mm) Impedance Rated ripple () MAX. (mArms) 8 x 11.5 10 x 12.5 10 x 12.5 10 x 20 12.5 x 25 12.5 x 31.5 16 x 25 35 (1V) 8 x 11.5 8 x 11.5 10 x 12.5 10 x 12.5 10 x 16 12.5 x 20 16 x 25 16 x 31.5 150 480 480 790 1240 1390 1500 Impedance Rated ripple () MAX. (mArms) 2.00 1.50 0.80 0.80 0.55 0.25 0.11 0.079 130 150 480 480 630 990 1500 1790 Rated ripple current (mArms) at 125C 100kHz Impedance () MAX. at 20C 100kHz Frequency coefficient of rated ripple current V Frequency CV 1000 > CV 1000 CV 10 to 100 V(Code) 300Hz 1kHz 10kHz or more 0.50 0.64 0.83 1.00 0.67 0.79 0.91 1.00 160 (2C) Case size D x L (mm) Item Cap. Code 4.7 10 22 33 47 68 100 150 120Hz 4R7 100 220 330 470 680 101 151 200 (2D) Rated ripple (mArms) 10 x 20 10 x 25 12.5 x 20 12.5 x 25 16 x 25 16 x 31.5 115 154 187 245 329 434 Case size D x L (mm) 250 (2E) 350 (2V) Rated ripple (mArms) Case size D x L (mm) Rated ripple (mArms) 178 126 157 204 250 329 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 31.5 178 128 171 225 292 10 x 20 10 x 25 12.5 x 20 12.5 x 25 16 x 20 16 x 25 Case size D x L (mm) 10 x 20 10 x 25 12.5 x 25 16 x 25 16 x 31.5 400 (2G) Rated ripple (mArms) 153 185 139 189 243 Case size D x L (mm) 10 x 20 10 x 25 12.5 x 31.5 16 x 25 16 x 31.5 450 (2W) Rated ripple (mArms) 153 186 142 189 243 Case size D x L (mm) 10 x 25 12.5 x 20 16 x 25 16 x 31.5 Rated ripple (mArms) 158 186 154 203 Rated ripple current (mArms) at 125C 120Hz Frequency coefficient of rated ripple current V 160 to 450 Frequency 50Hz 120Hz 300Hz 1kHz 10kHz 100kHz or more 4.7 to 330 0.75 1.00 1.25 1.50 1.75 1.80 .47 to 150 0.80 1.00 1.15 1.30 1.40 1.50 Cap. (F) 253 Wider range of rating. CAT.8100F