Type RJS RoHS 6 Compliant Telecom - Power Cross Protection & Ballast Protection RJSDO808 Catalog Ampere | Voltage | Typical Volt-drop | Melting I2T | Melting 2T | Peak Surge Current | Maximum Number Rating Rating Cold @ron%e In | < 10 mSec @10 In (Amp) > Power Resist v issipati ores S Pim rw Se (ohm) | max. | arse | (sea | Tous io00es |W) RJS 100-R | 100mA | 600V | 17 25 0.09 0.11 6 0.41 RJS 125-R | 125mA | 600V | 11 2.1 0.13 0.17 8 0.43 RJS 160-R | 160mA | 600V 7 1.8 0.21 0.26 10 0.46 RJS Fuses are primarily intended for use in telecommunication circuit RUS 200-R | 200mA | 600V 48 15 0.33 0.41 13 0.49 applications requiring low current protection with high surge tolerance. They are typically used to replace heat coil type devices. They are designed RIS 250-R | 250mA | 600V 3.2 1.3 0.51 0.64 16 0.53 to be placed between the line input and the surge arresting components RUS 300-R | 300mA | 600v 21 11 0.80 1.00 20 0.56 (mov. gas tube, zenor diode, air gaps, etc.) _ - _ _ - These fuses will withstand transient surge currents generated by lightning RUS 350-R | 350mA | 600V Ww 1.0 1.0 13 24 0.58 in accordance with the attached table. RUS 400-R | 400mA | GO0V | 1.4 0.9 1.2 16 29 0.60 RJS fuses guard protected circuitry against sustained overload or short circuit conditions. Such sustained overloads may be generated by accidental RIS 500-R | 500mA | 600V 0.9 0.78 19 24 36 0.64 contact between utility cables and phone lines (power line cross). RJS 600-R | 600mA | 600V 0.6 0.66 3.0 3.8 46 0.68 RJS fuses are primarily designed for use in telecommunications circuits RUS 700-R | 700mA | 6O00V 0.49 0.61 38 48 54 0.70 which require compliance with the test requirements specified in UL/IEC - - - - - 1950 / 60950 and Telcordia GR1089, Issue 3. RUS 750-R | 750mA | 600V 0.44 0.58 43 5.5 58 071 RUS 1-R 1A 600V 0.26 0.47 74 9.3 80 0.77 Electrical Characteristics (UL/CSA STD. 248-14) Ris 125R! 1.25, | eoov | 0.17 040 7] 15 100 0a? Testi Blow Time RUS 1.5-R 1.5A | 600V 0.13 0.35 7 21 120 0.86 esting Current Mini Maxi RIS 2-R 2A | 600v | 0.08 0.29 28 36 155 0.93 100% 4 Hrs. N/A 135% WA Tir RUS 2.5-R | 2.5A | 600V 0.05 0.24 44 56 190 0.99 200% 3 sec 20 sec RUS 3-R 3A 600V 0.033 0.20 69 87 230 1.06 50% 100 msec 1 see ps4r | 4a | 6oov | 0.022 | 0.17 | 108 136 300 1.13 1000% 30 msec 300 msec RUS 5-R 5A 600V 0.015 0.15 169 212 370 1.20 Approvals Al; @ A C Consult manufacturer for other ratings Power Cross (Telecom) Rating Double - exponential . . Power Intended Safety Agency Approvals | Interrupting Rating | Factor Application (Fus e Rated 0.1 - 1.5A ) Im puls e Waveform a Recognized File no. 10,000A, 125Vac 0.7 - 0.8 General Purpose Toad jean - corer, Waveform Duration Of A/B Seconds MSs 20624 200A, 250Vac 0.7 - 0.8 | Primary Protection Overload Current | Voltage | Clearing Time Limit | x ve 5 / Biporatorere1o Se) - 135% Fuse rating 600V Less than 1 hour , f @ A File no. 100A, 350Vac Resistive} Ballast Protection 200% Fuse Rating 600V Less than 20 seconds LR39772 60A, 600Vac Resistive | Telecom Protection 2.2K 600V__| Less than_10 minutes oe 7A 600V Less than 1 seconds J 40A 600V Less than 50 msec Ot phy 60A 600V Less than 20 i 6 Time RoHS 6 Compliant Product __ oN " . . . Mechanical Dimensions Environmental Specification Soldering Techniques & Compatibility Standard Lead | Short Lead Wave Solder: 260C, 10 sec max. (MIL-STD-202, Method 210) A | ,0.78"+/-0.01" 0.76"+/-0.01" 4 cL (19.34/-0.2mm) | (19.3+/-0.2mm) D |ECOMMENDED Shock 0.80"+/-0.05 0.80"+/-0.05 T Th arer MIL-STD-202, Method 213, Test Condition | B | (20.34/-1.27mm) | (20:34/-1.27mm) C on 1.0mm DA > (100 Gs peak for 6 milliseconds) Cc on Typical pu gor iL L L| | 0.80" (20.3mm) I Vibration gels etki | 6 MIL-STD-202, Method 201 (10-55 Hz, 0.06 inch, total excursion) D (4.6mm) (4.6mm) Salt Spray 8 MIL-STD-202, Method 101, Test condition B (48 hrs) Physical Specification 3 Insulation Resistance Materials 3 MIL-STD-202, Method 302, Test Condition A Body: Glass g (After Opening) 10,000 ohms minimum Lead Wire: Matte Tin Plated Copper, Diameter 0.032" = Solderability Marking s MIL-STD-202, Method 208 On fuse: bel, Type, Current Rating, Voltage Rating, Appropriate 8 Resistance to solder Heat Safety Logos, W (RoHS 6 compliant) 3 MIL-STD-202, Method 210, Test Condition C (260C, 20 sec) On label: bel, RJS, Current Rating, Voltage Rating, Interrupting Rating, 2 Thermal Shock Appropriate Safety Logos and 4 a & (China RoHS compliant) 8 MIL-STD-202, Method 107,Test Condition B (-65C to +125C) | $ . Packaging e Operating Temperature In bulk : 2,000 pcs per box. (standard Lead) 500 pcs per box. (short Lead) - oO + , 55C to +125C ORDERING INFORMATION SEE LAST 2 PAGES Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 e Tel: 201-432-0463 Fax: 201-432-9542 e E-Mail: belfuse@belfuse.com Website: www. belfuse.com = RJSC0808 Type RJS RoHS 6 Compliant Telecom - Power Cross Protection & Ballast Protection RJS - TIME CURRENT CHARACTERISTIC CURVE q<qeccqcdcecedcecrcccd ssesessssssS 85.8 SSSRRRRSRSRR< 8A aaa ss 10000 1000 100 TIME IN SECONDS 8 0.1 8 3 8 3 2 8 8 = 0.01 a s 0.01 0.1 10 100 1000 8 CURRENT IN AMPERES & NOTE - see important information under User Guideon P.08 Corporate Office Far East Office European Office Bel Fuse Inc. Bel Fuse Ltd. Bel Fuse Europe Ltd. 206 Van Vorst Street, Jersey City, NJ 07302 8F/8 Luk Hop Street Preston Technology Management Centre Tel: 201-432-0463 San Po Kang Marsh Lane, Preston PR1 8UQ Fax: 201-432-9542 Kowloon, Hong Kong Lancashire, U.K E-Mail: belfuse@belfuse.com Tel: 852-2328-5515 Tel: 44-1772-556601 Website: www. belfuse.com Fax: 852-2352-3706 Fax: 44-1772-888366 44