1
G5V-2 PCB Relay
Miniature Relay for Signal Circuits
■Wide switching power of 10 µA to 2 A.
■High dielectric strength coil-contacts:1,000 VAC;
open contacts: 750 VAC.
■Conforms to FCC Part 68 requirements.
■Ag + Au clad bifurcated crossbar contacts and
fully sealed for high contact reliability.
■New 150-mW relays with high-sensitivity.
Ordering Information
Model Number Le ge nd
Specifications
■Coil Ratings
Standar d Models
RC
FCC
Classification Contact form Contact type Contact material Enclosure ratings Model
Standard DPDT Bifurcated crossbar Ag + Au-clad Fully sealed G5V-2
High-sensitivity G5V-2-H1
Rated coil voltage
Note: When ordering, add the rated coil voltage to the model number.
Example: G5V-2 12 VDC
1. Contact Form
2: DPDT
2. Classification
H1: High-sensitivity
3. Rated Coil Voltage
3, 5, 6, 9, 12, 24, 48 VDC
G5V - - VDC
132
Rated voltage 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 48 VDC
Rated current 166.7 mA 100 mA 83.3 mA 55.6 mA 41.7 mA 20.8 mA 12 mA
Coil resistance 18
W
50
W
72
W
162
W
288
W
1,152
W
4,000
W
Coil inductance
(H) (ref. value) Armature OFF 0.04 0.09 0.16 0.31 0.47 1.98 7.23
Armature ON 0.05 0.11 0.19 0.49 0.74 2.63 10.00
Must operate voltage 75% max. of rated voltage
Must release voltage 5% min. of rated voltage
Max. voltage 120% of rated voltage at 23°C
Power consumption Approx. 500 mW Approx.
580 mW
2
G5V-2G5V-2
High Sensitivity Models
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.
2. Operating characteristics are measured at a coil temperature of 23°C.
■Contact Ratings
Note Note:P level: l60 = 0.1 x 10–6/operation
■Characteristics
Rated voltage 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 48 VDC
Rated current 50 mA 30 mA 25 mA 16.7 mA 12.5 mA 8.33 mA 6.25 mA
Coil resistance 60
W
166.7
W
240
W
540
W
960
W
2,880
W
7,680
W
Coil inductance
(H) (ref. value) Armature ON 0.18 0.46 0.70 1.67 2.90 6.72 20.1
Armature OFF 0.57 0.71 0.97 2.33 3.99 9.27 26.7
Must operate voltage 75% max. of rated voltage
Must release voltage 5% min. of rated voltage
Max. voltage 180% of rated voltage at 23°C 150% of rated
voltage at
23°C
Power consumption Approx. 150 mW Approx.
200 mW Approx.
300 mW
Item Standard models High sensitivity models
Load Resistive load (cos
f
= 1)
Rated load 0.5 A at 125 VAC; 2 A at 30 VDC 0.5 A at 125 VAC; 1 A at 24 VDC
Contact material Ag + Au-clad
Rated carry current 2 A
Max. switching voltage 125 VAC, 125 VDC
Max. switching current 2 A 1 A
Max. switching power 62.5 VA, 60 W 62.5 VA, 24 W
Failure rate (reference value) 0.01 mA at 10 mVDC
Item Standard models High sensitivity models
Contact resistance 50 m
W
max. 100 m
W
max.
Operate time 7 ms max.
Release time 3 ms max.
Bounce time Operate: approx. 0.3 ms
Release: approx. 1.5 ms
Max. operating frequency Mechanical: 36,000 operations/hr
Electrical: 1,800 operations/hr (under rated load)
Insulation resistance 1,000 M
W
min. (at 500 VDC)
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between coil
and contacts
1,000 VAC, 50/60 Hz for 1 min between con-
tacts of different polarity
750 VAC, 50/60 Hz for 1 min between contacts
of same polarity
1,000 VAC, 50/60 Hz for 1 min between coil
and contacts
1,000 VAC, 50/60 Hz for 1 min between con-
tacts of different polarity
500 VAC, 50/60 Hz for 1 min between contacts
of same polarity
Impulse withstand voltage 1,500 V (10 x 160 µs) between coil and contacts (conforms to FCC Part 68)
Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Malfunction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Shock resistance Destruction: 1,000 m/s2 (approx. 100G)
Malfunction: 200 m/s2 (approx. 20G) Destruction: 1,000 m/s2 (approx. 100G)
Malfunction: 100 m/s2 (approx. 10G)
Endurance Mec hanical: 15,000,000 operations min. (at 36,000 operations/hr)
Electrical: 100,000 operations min. (at 1,800 operations/hr)
Ambient temperature Operating:
-
25°C to 65°C (with no ic ing) Operating:
-
25°C to 70°C (with no icing)
Ambient humidity Operating: 5% to 85%
Weight Approx. 5 g
3
G5V-2G5V-2
■Approved Standards
UL478, UL1950, UL508 (File No. E41515)/CSA C22.2 No.0, No.14 (File No. LR24825)
Engineering Data
Contact form Coil ratings Contact ratings
G5V-2 G5V-2-H1
DPDT 3 to 48 VDC 0.6 A, 125 VAC (general use)
0.6 A, 110 VDC (resistive load)
2 A, 30 VDC (resistive load)
0.5 A, 125 VAC (general use)
0.2 A, 110 VDC (resistive load)
1 A, 24 VDC (resistive load)
Maximum Switching Power
G5V-2
Ambient Temperature vs.
Maximum Coil Voltage
G5V-2
Endurance
G5V-2
Switching current (A)
Switching voltage (V) Switching current (A)
Endurance (x10 operations)
3
Ambient temperature (°)
Maximum coil voltage (%)
Coil rated voltage
3 to 24 VDC
48 VDC
30-VDC
resistive
load
125-VAC resistive
load
123
AC resistive load
DC re
sistive
load
G5V-2-H1 G5V-2-H1G5V-2-H1
Switching current (A)
Switching voltage (V) Switching current (A)
Life expectancy (x10 operations)
3
Ambient temperature (°)
Maximum coil voltage (%)
AC resistive
load
DC resistive load
5
3
1
0.7
0.5
0.3
0.2
0.1
0
24-VDC resistive load
125-VAC resistive load
1000
500
300
100
50
30
10
3 to 24 VDC
48 VDC
200
180
160
140
120
100
80
0
Note: The maximum coil voltage refers to the maxi
-
mum value in a varying range of operating
power voltage, not a continuous voltage.
Note: The maximum coil voltage refers to the maxi-
mum value in a varying range of operating
power voltage, not a continuous voltage.
4
G5V-2G5V-2
Dimensions
Note: 1. All units are in millim eters unless otherwise indicated.
2. Orientation marks are indicated as follows:
Terminal Arrangement/
Internal Connections
(Bottom View)
Mounting Holes
(Bottom View)
Tolerance: ±0.1
20.5 max.
20.3 typ.
10.1 max.
9.9 typ.
11.5 max.
11.4 typ.
0.5
3.5
7.62
0.30.5
7.62 5.08 5.08
(1.3)
7.62
(1.3)
Eight, 1-dia. holes
(1.2)
1
16
4
13
6
11
8
9
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. K046-E1-2B
