Lipped Straight
Dimensions in inches (millimeters) and are subject to change without notice.
© 2012 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com B-21 E-Mail: sales@glenair.com
B
770-007S2
Type 2 Zero Halogen
Straight Lipped Adapter Shrink Boots, High Ratio
Low Smoke, Zero Halogen
Meets U.S. and E.U. toxicity
requirements.
-30° C to +135° C
Type 2 Low Smoke Zero Halogen (LSZH) For Regulated
Environmental Safety Applications
Straight lipped high ratio boots are used when the cable or wire bundle is much smaller diameter
than the adapter. Halogen-free semi-exible polyolen meets low smoke and toxicity requirements
of shipboard, transit and aircraft systems. These Low Smoke/Zero Halogen (LSZH) boots t most
standard shrink boot adapters, including AS5258 types along with Glenair Series 31 and Series 44
adapters. Oxygen index greater than 30%, smoke index less than 20, and toxicity index under 3
per 100 grams. Material meets requirements of NAVSEA 5617649, VG95343 Part 29, BSG 198-5-DF,
EN62329-101 and SAE AS5258 Type G. Good resistance to oils, fuels and solvents. Available with
high temperature hot melt adhesive lining, these boots provide strain relief and environmental
protection to connector/cable transitions. Temperature rating -30° to +125° C. Black color.
Boot
Size
Part Number
No Adhesive Lining
Pre-Coated with W1
Hi-Temp Hot-Melt
Adhesive
Pre-Coated with W2
Standard Hot-Melt
Adhesive
Pre-Coated with R
Epoxy Adhesive
770-007S203 770-007S203W1 770-007S203W2 770-007S203R
770-007S204 770-007S204W1 770-007S204W2 770-007S204R
770-007S206 770-007S206W1 770-007S206W2 770-007S206R
770-007S207 770-007S207W1 770-007S207W2 770-007S207R
Type 3 Flexible Polyolen For General Duty Applications
Straight lipped high ratio boots are used when the cable or wire bundle is much smaller diameter
than the adapter. Economical exible polyolen boots t standard M85049 shrink boot adapters,
Glenair Series 31 and Series 44 adapters. These self-extinguishing boots meet the requirements
of SAE AS81765/1 Type 1. Good resistance to oils and fuels. Available with optional hot melt
adhesive lining, these boots provide strain relief and environmental protection to connector/
cable transitions, and are ideally suited for heat-sensitive cables due to the material's low heat
shrink temperature of +100° C. Temperature rating -55° to +135° C. Black color.
General purpose harnessing
Economical, exible
-55° C to +135° C
Boot
Size
Part Number
No Adhesive Lining
Pre-Coated with W2
Standard Hot-Melt
Adhesive
770-007S303 770-007S303W2
770-007S304 770-007S304W2
770-007S306 770-007S306W2
770-007S307 770-007S307W2
770-007S3
Type 3 Flexible Polyloen
Straight Lipped Adapter Shrink Boots, Long Tail