Product Overview
The Aquantia® GEN2 AQrate PHYs are low-power, high-performance, multi-gigabit 10GBASE-T/5GBASE-
T/2.5GBASE-T/1000BASE-T/100BASE-TX transceivers. AQrate technology enables broad-based market
adoption of multi-gigabit network connectivity through a wide range of cable types including Cat 5e, Cat 6,
and Cat 6a or above. AQrate bridges the bandwidth gap between legacy cabling infrastructure designed
for 1 Gbps data rates and new applications that demand bandwidth in excess of 1 Gbps with zero
changes to legacy cabling or infrastructure, enabling the unabated roll-out of higher-speed connectivity
solutions for Enterprise, Data Center, SMB/SOHO, Carrier, Automotive, and ISM (Industrial, Scientic,
Medical) markets.
AQrate PHYs are compliant with both the IEEE® 802.3an/bz standard and the NBASE-TTM Alliance
PHY Specication to perform all the physical layer functions required to implement 10GBASE-
T/5GBASE-T/2.5GBASE-T/1000BASE-T/100BASE-TX transmission over 100 meters of twisted pair
cabling. The AQrate PHY family integrates such features as Energy Ecient Ethernet (EEE), Precision
Time Protocol (PTP)/1588v2, IEEE MAC Security (MACsec), supports all PoE standards up to 100W,
and supports jumbo packets up to 16KB in all operating modes.
Quad: The AQR407/AQR408/AQR409 are pin-compatible, multi-gigabit, quad-port PHYs housed in
19 mm ip-chip BGA packages enabling ecient, high-density design for high port-count and compact
switches across a range of speed requirements.
Single: The AQR107/AQR108/AQR109 are pin-compatible, multi-gigabit, single-port PHYs that
address multiple network connectivity applications and speed requirements. These devices are
available in compact 7 mm x 11 mm ip-chip BGA packages featuring the Industrial (-40°C to +108°C)
temperature operating range.
AQrate Gen2 Ethernet PHYs
10GBASE-T | 5GBASE-T | 2.5GBASE-T | 1000BASE-T | 100BASE-TX Ethernet PHYs
Applications
Aquantia’s GEN2 AQrate multi-gigabit
PHYs are a game changing technology
enabling Enterprise, Data Center, SMB/
SOHO, Carrier, Automotive, and ISM
(Industrial, Scientic, Medical) markets to
evolve beyond 1 Gbps to 5 Gbps and 2.5
Gbps data rates. The single-port product
family is ideally suited for wireless access
point backhaul, residential gateways/
routers, client computing, and a myriad of
networked device applications while the
quad-port family permits ecient high-port
density and compact switch design.
Device Name Speeds Package
AQR407/AQR107 5-speed 10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/ 100 Mbps
AQR408/AQR108 4-speed 5 Gbps/2.5 Gbps/1 Gbps/ 100 Mbps
AQR409/AQR109 3-speed 2.5 Gbps/1 Gbps/ 100 Mbps
1 Minimum specication is ambient temperature, and the maximum is junction temperature.
Aquantia Corp. reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed
as a result of their use or application. Aquantia and the Aquantia logo are trademarks of Aquantia Corp. Copyright © 2017 Aquantia Corp.
Aquantia Corp. | 105 E Tasman Dr, San Jose, CA 95134 | phone: +1.408.228.8300 | www.aquantia.com Version: 1.0 PB-N2100
Features Benets
IEEE 802.3an/bz and NBASE-T featuring AQrate technology
10GBASE-T: 100 meters over Augmented Cat 6 (Cat 6A) and Cat 7,
55 meters over Cat 6, and best eort over Cat 5e
5GBASE-T, 2.5GBASE-T: over 100 meters of Cat 5e or better cabling
Ability to support highest data rate possible with a given cable
environment while reducing power and latency
5G and 2.5G operation over legacy infrastructure, while delivering
backward compatibility with existing equipment
Energy-Ecient Ethernet (EEE)
MACsec (IEEE 802.1ae, MAC security standard)
- Full support for Advanced Encryption Standard (AES-256) and stand-
alone operation
PTP/1588v2
Synchronous Ethernet (Sync-E), ITU-T standard in cooperation with IEEE
EEE lowers overall power consumption and lowers equipment operating costs
MACsec provides for secure, encrypted data communications across networks
PTP/1588v2 provides for timing accuracy across the network
Sync-E synchronizes clock signals on the PCB
Integrated Wake-on-LAN (WoL) Support
- Compliant to Microsoft Network Device Class specication
Integrated packet ltering enables sub-1W support in 100BASE-TX mode
Built-in Thermal Management
- On-chip thermal sensor with alarm and warning thresholds
Enables deployment in thermally constrained environments
Advanced Cable Diagnostics
- On-chip high-resolution cable analyzer
Enables the deployment of meaningful cable analysis tools for debugging
installation problems
High-Performance full KR (with autonegotiation)/
XFI/USXGMII/2500BASE-X/SGMII I/F w/ AC-JTAC
- Capable of rate adapting all rates into KR/XFI via PAUSE and 100M/1G
into 2500BASE-X
Ensures trouble-free operation over a range of interconnect scenarios
Comprehensive interface support
- Supports legacy and next generation MACs/switches/processors
Advance Loopback and Diagnostic Capability
- Flexible on-chip BERT
- Full 1-second packet counters and CRC-32 checkers
Enables extensive system test and debug with remote loopback control
Integrated MDI Filter and Advanced RFI Cancellation
- Eliminates external lter components
Robust Radio Frequency Interference (RFI) performance
- Resilient operation when exposed to RFI
AQRATE PHY BLOCK DIAGRAM (PER-PORT)
DSP
ENCODER/
DECODER
SERDES
I/F
ANALOG
D/A & A/D Line
XFI, USGXMII,
2500BASE-X,
SGMII