1N5772 Isolated Diode Array with HiRel MQ, MX, MV, and MSP Screening Options SCOTTSDALE DIVISION 10-PIN Ceramic Flat Pack WWW. Microsemi . C O M APPEARANCE DESCRIPTION These low capacitance diode arrays are multiple, discrete, isolated junctions fabricated by a planar process and mounted in a 10-PIN package for use as steering diodes protecting up to eight I/O ports from ESD, EFT, or surge by directing them to the positive side of the power supply line and to ground (see figure 1). An external TVS diode may be added between the positive supply line and ground to prevent overvoltage on the supply rail. They may also be used in fast switching core-driver applications. This includes computers and peripheral equipment such as magnetic cores, thin-film memories, plated-wire memories, etc., as well as decoding or encoding applications. These arrays offer many advantages of integrated circuits such as high-density packaging and improved reliability. This is a result of fewer pick and place operations, smaller footprint, smaller weight, and elimination of various discrete packages that may not be as user friendly in PC board mounting. IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com APPLICATIONS / BENEFITS FEATURES * * * Hermetic Ceramic Package Isolated Diodes To Eliminate Cross-Talk Voltages High Breakdown Voltage VBR > 60 V at 10 A * * * Low Leakage IR< 100nA at 40 V Low Capacitance C < 8.0 pF Options for screening in accordance with MIL-PRF19500/474 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, MX, MV, or MSP prefixes respectively to part numbers. For example, designate MX1N5772 for a JANTX screen. * * * * * * * High Frequency Data Lines RS-232 & RS-422 Interface Networks Ethernet: 10 Base T Computer I/O Ports LAN Switching Core Drivers IEC 61000-4 Compatible (see circuit in figure 1) 61000-4-2 ESD : Air 15kV, contact 8kW 61000-4-4 (EFT) : 40A - 5/50 ns 61000-4-5 (surge): 12A 8/20 s MECHANICAL AND PACKAGING MAXIMUM RATINGS * * * * * * * Reverse Breakdown Voltage of 60 Vdc (Note 1 & 2) Continuous Forward Current of 300 mA dc (Note 1 & 3) Peak Surge Current (tp=1/120 s) of 500 mA dc (Note 1) o 400 mW Power Dissipation per Junction @ 25 C o 500 mW Power Dissipation per Package @ 25 C (Note 4) o Operating Junction Temperature range -65 to +150 C o Storage Temperature range of -65 to +200 C NOTE 1: NOTE 2: NOTE 3: NOTE 4: * * * 10-PIN Ceramic Flat Pack Weight 0.25 grams (approximate) Marking: Logo, part number, date code and dot identifying pin #1 Carrier Tubes; 19 pcs (standard) * Each Diode Pulsed: PW = 100 ms max; duty cycle <20% o o Derate at 2.4 mA/ C above +25 C o o Derate at 4.0 mW/ C above +25 C ELECTRICAL CHARACTERISTICS (Per Diode) @ 25oC unless otherwise specified 1N5772 FORWARD VOLTAGE VF2 IF = 500 mA (Note 1) REVERSE CURRENT IR1 VR = 40 V Vdc Vdc 1 1.5 CAPACITANCE (PIN TO PIN) REVERSE RECOVERY TIME trr IF = IR = 200 mA irr = 20 mA VR = 0 V F = 1 MHz FORWARD RECOVERY TIME tfr IF = 500 mA Adc pF ns ns 0.1 8.0 40 20 Ct RL = 100 ohms NOTE 1: Pulsed: PW = 300 s +/- 50 s, duty cycle <2%, 90 s after leading edge. Copyright 2003 02-20-2003 REV 0 Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 1N5772 PART NUMBER FORWARD VOLTAGE VF1 IF = 100 mA (Note 1) 1N5772 Isolated Diode Array with HiRel MQ, MX, MV, and MSP Screening Options SCOTTSDALE DIVISION IR Ct WWW. Microsemi . C O M SYMBOLS & DEFINITIONS Symbol VBR VF DEFINITION Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current. Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current. Maximum Leakage Current: The maximum leakage current that will flow at the specified voltage and temperature. Capacitance: The capacitance of the TVS as defined @ 0 volts at a frequency of 1 MHz and stated in picofarads. PACKAGE DIMENSIONS SCHEMATIC CIRCUIT Supply rail (+VCC) I/O Port GND (or -VCC) 1N5772 Steering Diode Application FIGURE 1 Copyright 2003 02-20-2003 REV 0 Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 2