MCC TM Micro Commercial Components 2SA1576A-Q 2SA1576A-R 2SA1576A-S omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features * Lead Free Finish/RoHS Compliant ("P" Suffix designates RoHS Compliant. See ordering information) x Excellent hFE Linearity x Complementary to 2SC4081 * Epoxy meets UL 94 V-0 flammability rating * Moisure Sensitivity Level 1 * Halogen free available upon request by adding suffix "-HF" PNP Silicon Epitaxial Transistors Maximum Ratings Symbol VCEO VCBO VEBO IC PC TJ TSTG Rating Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current Collector power dissipation Junction Temperature Storage Temperature Rating -50 -60 -6 -150 200 150 -55 to +150 SOT-323 Unit V V V mA mW A D C B Parameter Min Typ Max E B F Electrical Characteristics @ 25 Unless Otherwise Specified Symbol C E Units OFF CHARACTERISTICS ICBO IEBO Collector Cutoff Current (VCB=-60Vdc) Emitter Cutoff Current (VEB=-6.0Vdc) --- --- -100 nAdc --- --- -100 nAdc H G K DIMENSIONS ON CHARACTERISTICS BVCBO Collector-base breakdown voltage (IC=-50Adc ) -60 BVCEO Collector-emitter breakdown voltage (IC=-1mAdc) -50 --- --- Vdc BVEBO Emitter-base breakdown voltage (IE=-50Adc) -6 --- --- Vdc 120 --- 560 --- -0.5 Vdc --- --- Vdc hFE DC Current Gain (IC=-1mAdc, VCE=-6.0Vdc) VCE(sat) Collector Saturation Voltage (IC=-50mAdc, IB=-5.0mAdc) --- Cob Output Capacitance (VCB=-12.0Vdc, IE=0, f=1.0MHz) --- 5.0 --- pF fT Gain Bandwidth product (VCE=-12Vdc, IE=2mAdc,f=30MHz) --- 100 --- MHz --- Revision: C DIM A B C D E F G H J K INCHES MIN MAX .071 .087 .045 .053 .083 .096 .026 Nominal .047 .055 .012 .016 .000 .004 .035 .039 .004 .010 .006 .016 MM MIN MAX 1.80 2.20 1.15 1.35 2.10 2.45 0.65Nominal 1.20 1.40 .30 .40 .000 .100 .90 1.00 .100 .250 .15 .40 NOTE Suggested Solder Pad Layout 0.70 hFE CLASSIFICATION Rank hFE Marking J 0.90 1.90 mm 0.65 Q 120~270 FQ R 180~390 FR S 270~560 FS www.mccsemi.com 1 of 3 0.65 2013/09/24 MCC 2SA1576A Micro Commercial Components -5 -2 -1 -0.5 -0.2 -0.1 -0.2 -0.4 -0.6 -0.8 -1.0 -1.2 -1.4 -1.6 -100 -31.5 -28.0 -8 -24.5 -21.0 -6 -17.5 -14.0 -4 -10.5 -7.0 -2 -3.5A 0 BASE TO EMITTER VOLTAGE : VBE (V) -0.8 -0.4 -1.2 Fig.2 Grounded emitter output characteristics (I) 100 50 50 -150 -100 -20 -50A -1 -2 -3 -4 -5 Fig.3 Grounded emitter output characteristics (II) -1 Ta=25C -0.5 -0.2 IC/IB=50 -0.1 20 10 -0.05 -2 -5 -10 -20 -0.2 -0.5 -1 -50 -100 -1 -0.2 Ta=100C 25C -40C -0.05 -0.2 -0.5 -1 -2 1000 TRANSITION FREQUENCY : fT (MHz) -0.5 -0.1 -5 -10 -20 -50 -100 COLLECTOR CURRENT : IC (mA) Fig.7 Collector-emitter saturation voltage vs. collector current (II) -0.2 -0.5 -1 Ta=25C VCE=-12V 500 200 100 50 0.5 1 2 5 10 20 50 -2 -5 -10 -20 -50 -100 COLLECTOR CURRENT : IC (mA) Fig.5 DC current gain vs. collector current (II) lC/lB=10 -2 COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : IC (mA) Fig.4 DC current gain vs. collector current (I) VCE=-6V -5 -10 -20 -50 -100 100 EMITTER CURRENT : IE (mA) Fig.8 Gain bandwidth product vs. emitter current Fig.6 Collector-emitter saturation voltage vs. collector current (I) COLLECTOR OUTPUT CAPACITANCE : Cob (pF) EMITTER INPUT CAPACITANCE : Cib (pF) -0.2 -0.5 -1 COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) -200 COLLECTOR SATURATION VOLTAGE : VCE(sat) (V) DC CURRENT GAIN : hFE 100 -250 COLLECTOR TO EMITTER VOLTAGE : VCE (V) -40C 200 -500 -450 -400 -350 -300 IB=0 25C 200 Ta=25C -40 0 Ta=100C VCE=-5V -3V -1V Ta=25C -60 IB=0 -1.6 -2.0 500 500 -80 COLLECTOR TO MITTER VOLTAGE : VCE (V) Fig.1 Grounded emitter propagation characteristics DC CURRENT GAIN : hFE -35.0 Ta=25C COLLECTOR CURRENT : IC (mA) -10 -10 VCE=-6V Ta=100C 25C -40C COLLECTOR CURRENT : IC (mA) COLLECTOR CURRENT : Ic (mA) -50 -20 TM 20 Ta=25C f=1MHz IE=0A IC=0A Cib 10 Co b 5 2 -0.5 -1 -2 -5 -10 -20 COLLECTOR TO BASE VOLTAGE : VCB (V) EMITTER TO BASE VOLTAGE : VEB (V) Fig.9 Collector output capacitance vs. collector-base voltage Emitter inputcapacitance vs. emitter-base voltage www.mccsemi.com Revision: C 2 of 3 2013/09/24 MCC TM Micro Commercial Components Ordering Information : Device Packing Tape&Reel;3Kpcs/Reel Part Number-TP Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: C 3 of 3 2013/09/24 3