Ordering number:513H PNP/NPN Epitaxial Planar Silicon Transistor 2SB633/2SD613 85V/6A, AF 25 to 35W Output Applications Features Package Dimensions * High breakdown voltage, VCEO85V, high current 6A. * AF25 to 35W output. unit:mm 2010C [2SB633/2SD613] JEDEC : TO-220AB EIAJ : SC-46 ( ) : 2SB633 Specifications 1 : Base 2 : Collector 3 : Emitter Absolute Maximum Ratings at Ta = 25C Parameter Collector-to-Base Voltage Symbol Conditions Ratings Unit (-)100 V Collector-to-Emitter Voltage VCBO VCEO (-)85 V Emitter-to-Base Voltage VEBO (-)6 V IC (-)6 A Collector Current (Pulse) I CP (-)10 A Collector Dissipation PC 40 W Collector Current Junction Temperature Tj Storage Temperature Tstg Tc=25C 150 C -55 to +150 C Electrical Characteristics at Ta = 25C Parameter Symbol Conditions Ratings min typ max Unit Collector Cutoff Current ICBO VCB=(-)40V, IE=0 (-)0.1 mA Emitter Cutoff Current IEBO hFE1 VEB=(-)4V, IC=0 VCE=(-)5V, IC=(-)1A (-)0.1 mA 40* hFE2 VCE=(-)5V, IC=(-)3A 20 fT VCE=(-)5V, IC=(-)1A VCE(sat) VBE IC=(-)4A, IB=(-)0.4A (-)2.0 IE=(-)5A, IC=(-)1A (-)1.5 Cob VCB=(-)10V, f=1MHz DC Current Gain Gain-Bandwidth Product Collector-to-Emitter Saturation Voltage Base-to-Emitter Voltage Output Capacitance 320* 15 MHz V V (150) pF 110 pF Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 91098HA (KT)/90595MO (KOTO)/D251MH/4017KI/1115MW, TS/No.174, 8-2629 No.513-1/4 2SB633/2SD613 Parameter Symbol Collector-to-Base Breakdown Voltage Conditions V(BR)CBO IC=(-)5mA, IE=0 V(BR)CEO IC=(-)5mA, RBE= V(BR)CEO IC=(-)50mA, RBE= Collector-to-Emitter Brakdown Voltage Emitter-to-Base Breakdown Voltage V(BR)EBO ton Turn-ON Time Fall Time tf Storage Time tstg IE=(-)5mA, IC=0 Ratings min typ max Unit (-)100 V (-)85 V (-)85 V (-)6 V See specified Test Circuit (0.16) s 0.28 s See specified Test Circuit (0.33) s 0.50 s (1.45) s 3.60 s See specified Test Circuit * : The 2SB633/2SD613 are classified by 1A hFE as follows : 40 C 80 60 D 120 100 E 200 160 F 320 Switching Time Test Circuit No.513-2/4 2SB633/2SD613 No.513-3/4 2SB633/2SD613 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any and all SANYO products described or contained herein fall under strategic products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of Japan, such products must not be exported without obtaining export license from the Ministry of International Trade and Industry in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co. , Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of September, 1998. Specifications and information herein are subject to change without notice. PS No.513-4/4