SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
PNP/NPN Epitaxial Planar Silicon Transistor
85V/6A, AF 25 to 35W Output Applications
Ordering number:513H
2SB633/2SD613
91098HA (KT)/90595MO (KOTO)/D251MH/4017KI/1115MW, TS/No.174, 8-2629 No.513–1/4
retemaraPlobmySsnoitidnoCsgnitaRtinU
egatloVesaB-ot-rotcelloCV
OBC 001)(V
egatloVrettimE-ot-rotcelloCV
OEC 58)(V
egatloVesaB-ot-rettimEV
OBE 6)(V
tnerruCrotcelloCI
C6)(A
)esluP(tnerruCrotcelloCI
PC 01)(A
noitapissiDrotcelloCP
C04W
erutarepmeTnoitcnuJjT 051
erutarepmeTegarotSgtsT 051+ot55
( ) : 2SB633
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Package Dimensions
unit:mm
2010C
[2SB633/2SD613]
Features
· High breakdown voltage, VCEO85V, high current 6A.
· AF25 to 35W output.
˚C
Electrical Characteristics at Ta = 25˚C
JEDEC : T O-220AB 1 : Base
EIAJ : SC-46 2 : Collector
3 : Emitter
˚C
Tc=25˚C
retemaraPlobmySsnoitidnoC sgnitaR tinU
nimpytxam
tnerruCffotuCrotcelloCI
OBC VBC I,V04)(= E0=1.0)(Am
tnerruCffotuCrettimEI
OBE VBE I,V4)(= C0=1.0)(Am
niaGtnerruCCD hEF 1V
EC I,V5)(= CA1)(=*04*023
hEF 2V
EC I,V5)(= CA3)(=02
tcudorPhtdiwdnaB-niaGf
TVEC I,V5)(= CA1)(= 51zHM
egatloVnoitarutaSrettimE-ot-rotcelloCV
)tas(EC ICI,A4)(= BA4.0)(=0.2)(V
egatloVrettimE-ot-esaBV
EB IEI,A5)(= CA1)(=5.1)(V
ecnaticapaCtuptuOC
bo VBC zHM1=f,V01)(= )051(Fp
011Fp
2SB633/2SD613
No.513–2/4
retemaraPlobmySsnoitidnoC sgnitaR tinU
nimpytxam
egatloVnwodkaerBesaB-ot-rotcelloCV
OBC)RB( ICI,Am5)(= E0=001)(V
egatloVnwodkarBrettimE-ot-rotcelloC VOEC)RB( ICR,Am5)(= EB =58)(V
VOEC)RB( ICR,Am05)(= EB =58)(V
egatloVnwodkaerBesaB-ot-rettimEV
OBE)RB( IEI,Am5)(= C0=6)(V
emiTNO-nruTt
no tiucriCtseTdeificepseeS )61.0(sµ
82.0sµ
emiTllaFt
ftiucriCtseTdeificepseeS )33.0(sµ
05.0sµ
emiTegarotSt
gts tiucriCtseTdeificepseeS )54.1(sµ
06.3sµ
* : The 2SB633/2SD613 are classified by 1A hFE as follows :
08C04021D06002E001023F061
Switching Time Test Circuit
2SB633/2SD613
No.513–3/4
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer’s
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer’s products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any and all SANYO products described or contained herein fall under strategic
products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of
Japan, such products must not be exported without obtaining export license from the Ministry of
International Trade and Industry in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of September, 1998. Specifications and information herein are
subject to change without notice.
2SB633/2SD613
PS No.513–4/4