DIGITAL PHASE SHIFTERS SINGLE-POLE SINGLE-THROW SWITCHES FEATURES * Optimized for fast switching speeds (down to 20 ns maximum) * Optimized for lowest phase deviation over band * RMS phase error 3 typical * Low insertion loss * Power handling up to 30 dBm * OIP3 (typically 25 dBm) * Hermetic sealing available MITEQ offers a 6 bit, 6 to 18 GHz digital phase shifter operating as high as 18 GHz for EW applications. This product offers exceptional power handling capability in excess of 25 dBm and switching speed of 20 ns maximum. This device is ideally suited for phased array applications and interferometric receivers. We also offer a number of narrowband analog phase shifters denoted in the Analog Phase Shifter Section that utilize switched line and reflection phase shifter topologies. 8 BIT, 650-1550 MHz DPS-00650155-180-8-IF-IF Frequency range Peak Phase error Phase Insertion phase variation Insertion loss Input/output VSWR Power Speed Size DC input 650-1550 MHz 0 to 180 in 1.4 steps @ 650 MHz 1 maximum (phase changes linearly w/frequency) 2 dB maximum 1.5 dB typical, 1.7 dB maximum 1.3:1 maximum 20 Watts CW, 300 Watts Peak 300 ns maximum 5.65" [143.51 mm] x 2.5" [63.5 mm] x 0.56" [14.22 mm] +5/-15 V 4 BIT, 2.9-3.1 GHz DPS-02900310-360-2-1F-1F Phase states Frequency range Insertion loss Input/output VSWR Switching speed Phase accuracy Amplitude accuracy Control Outline drawing 4 0 (Ref.), 22.5, 45, 90, 180 2.9-3.1 GHz 3 dB maximum 1.5:1 maximum 25 ns maximum 1 maximum 0.25 dB maximum TTL, "0" = Path on 174339 6 BIT, 1.2-1.4 GHz DPS-01200140-360-6-1F-1F Frequency range Insertion loss Insertion loss variation over phase range Phase shift Phase error Switching speed Input/output VSWR RF input power (working) RF input power (no damage) Outline drawing 1.2-1.4 GHz 3.5 dB maximum 3 dB maximum 0-360 minimum 3 maximum 200 ns maximum 1.65:1 maximum +10 dBm maximum +20 dBm maximum 174343 6 BIT, 3.1-3.7 GHz DPS-03100370-360-6-1F-1F Frequency range Peak phase error Phase Insertion phase variation Insertion loss Input/output VSWR Power Speed Size DC input 3.1-3.7 GHz 2 maximum 0-360 in 5.6 steps 2 dB maximum 1.2 dB typical, 1.4 dB maximum 1.4:1 maximum 50 Watts CW maximum 0.5 ms maximum 2.5" [63.5 mm] x 1.5" [38.1 mm] x 0.5" [12.7 mm] +5/-15 V 100 Davids Drive, Hauppauge, NY 11788 * TEL: (631) 436-7400 * FAX: (631) 436-7430 * www.miteq.com DIGITAL PHASE SHIFTERS (CONT.) 3 BIT, 9-10 GHz 6 BIT, 7-14 GHz DPS-09001000-360-3-1F-1F Phase states Frequency range Insertion loss Input/output VSWR Switching speed Phase accuracy Amplitude balance Control Logic truth table DC power Outline drawing 0 (Ref.), 90, 180, 270 9-10 GHz 7 dB maximum 1.7:1 maximum 20 ns maximum 5 maximum 0.5 dB maximum TTL, 2 lines E1 E2 Phase 0 0 0 0 1 90 1 0 180 1 1 270 5 V @ 50 mA maximum 174339 DPS-07001400-360-6-IF-IF RF frequency range Insertion loss Input/output VSWR Phase shift Phase shift step size Phase error Input third order intercept DC power Control input Outline drawing 7-14 GHz 10.5 dB typical, 11 dB maximum 2.5:1 maximum 360 maximum 5.6 minimum 3 typical midband, 6 maximum 40 dBm typical, 35 dBm maximum +5 VDC 6-bit TTL 174340 4 and 6 BIT, 0-360, 5.03-5.09 GHz Design Family Parameters Peak phase error Phase Insertion phase vs. temperature Insertion phase variation unit to unit Insertion loss, maximum Insertion loss vs. phase and frequency Loss at any phase setting unit to unit Operating power level Switching speed DC input Option #1 Low Loss 22.5 Steps (Typ.) (Max.) Option #2 High Stability 22.5 Steps (Typ.) (Max.) 2 2.5 1.3 1.5 0.3/C 1/C 3 5 1.4 dB 1.5 dB 0.4 dB 0.5 dB 0.18 dB 0.25 dB 4W CW 10W CW 0.2 us 0.5 us +5/-15 V 2 2.5 1.3 1.5 0.05/C 0.1/C 3 5 1.65 dB 1.75 dB 0.4 dB 0.5 dB 0.18 dB 0.25 dB 4W CW 10W CW 0.2 us 0.5 us +5/-15 V Option #3 High Stability 5.6 Steps (Typ.) (Max.) 2.7 1.2 0.05/C 3 1.75 dB 0.45 dB 0.25 dB 4W CW 0.2 us +5/-15 V 3.3 1.4 0.1/C 5 1.85 dB 0.6 dB 0.3 dB 10W CW 0.5 us DPS-06001800-360-6-5.6 RF frequency range Insertion loss Input/output VSWR Phase shift Phase shift step size Phase error Input third order intercept DC power Control input Outline drawing 6-18 GHz 15.5 dB maximum 3:1 maximum 360 maximum 5.6 minimum 3 typical midband, 6 maximum 40 dBm typical, 35 dBm maximum +5 VDC 6-bit TTL 174340 100 Davids Drive, Hauppauge, NY 11788 * TEL: (631) 436-7400 * FAX: (631) 436-7430 * www.miteq.com ORDERING INFORMATION To order a digital phase shifter, please include the model number derived from the following table. If requesting a quotation for a phase shifter not listed in this catalog, please consult MITEQ. Include any additional specifications that are not listed when creating the model number. DPS -06001800 -360 -6 -1F1F S Digital Phase Shifter Frequency Range Start and stop sequentially rounded to the nearest MHz. Example: 6 to 18 GHz would be 06001800 Phase Range Example: 360 degrees would be -360 Number Of Bits -3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 bit -4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 bit -6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 bit Input Connector SMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 GPO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Please add F for female or M for male. Output Connector SMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 GPO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Please add F for female or M for male. Special Technical Specification Requirements If required they must be denoted on the purchase order . . . . . . . . S Using the above information to order or request a phase shifter with other technical requirements placed in the purchase order or in the RFQ documentation would result in ordering a DPS-06001800-360-6-1F1FS, a 6 to 18 GHz, 180 digital phase shifter with other technical requirements denoted on purchase order. Other special technical specification requirements would typically be switching speed, in/out VSWR, IIP3, size, etc. ENVIRONMENTAL CONDITIONS Operating temperature .................... Storage temperature ........................ Humidity............................................ Vibration............................................ 0 to 70C -30 to +85C 95% noncondensing 12 g's rms, 20-2000 Hz per MIL-STD-810B Method 514, Procedure 5 100 Davids Drive, Hauppauge, NY 11788 * TEL: (631) 436-7400 * FAX: (631) 436-7430 * www.miteq.com DIGITAL PHASE SHIFTER OUTLINESWITCHES DRAWINGS SINGLE-POLE SINGLE-THROW 174339 1.56 [39.62] 0.44 [11.18] 0.11 [2.79] TYP. 0.57 [14.48] 1.34 [34.04] 1.50 [38.10] J1 IN 0.13 [3.30] TYP. J2 OUT E5 E4 E3 E2 GND E1 +5V -5V 0.75 [19.05] "SMA" FEMALE CONNECTOR, TYP. (2) PLACES 0.03 [0.76] DIA. PIN TYP. (8) PLACES 0.104 [2.642] THRU TYP. (4) HOLES 0.86 [21.84] 1.72 [43.69] 174340 1.25 [31.75] 1.00 [25.40] O0.104 [2.642] J3 1.55 [39.37] J1 J2 1.75 [44.45] 0.88 [22.35] 0.10 [2.54] 0.81 [20.57] 13 PIN OUT PIN FUNCTION NUMBER (DEG.) 1 2 3 4 5 6 7 8 9 180 90 45 22.5 11.25 5.6 GND +5 VDC not used PIN "1" 0.37 [9.40] 0.56 [14.22] 174343 SMA CONNECTOR, FEMALE SOUTHWEST MICROWAVE P/N 214-26SF OR .090 [2.286] DIA. THRU EQUIVALENT 2 PLACES 4 HOLES POWER CONNECTOR PIN ASSIGNMENTS PIN DESIGNATION 1 2 3 4 5 6 7 8 9 5.625 11.25 22.5 45 90 180 GND +15V -15V POWER CONNECTOR 9 PIN "D" CONNECTOR .010 [0.254] PIN "1" .010 [0.254] 0.98 [24.89] .020 [0.508] .010 [0.254] 1.500 [38.10] .010 [0.254] .004 [0.101] 0.19 [4.826] 0.15 [3.81] .010 [0.254] 5.70 [144.78] .010 [0.254] 0.15 [3.81] .010 [0.254] 6.00 [152.4] .020 [0.508] .010 [0.254] 1.01 [25.65] .004 0.19 [4.826] 1.00 [25.40] .020 [0.508] 0.25 [6.35] .004 [0.101] GENERAL NOTES: 1. Dimensions shown in brackets [ ] are in millimeters. 2. Unless specified, all connectors are type SMA female field replaceable. 3. Tolerance as follows: .xx = 0.01 [.xx = 0.25] .xxx = 0.005 [.xxx = 0.13] 100 Davids Drive, Hauppauge, NY 11788 * TEL: (631) 436-7400 * FAX: (631) 436-7430 * www.miteq.com