DPS-00650155-180-8-IF-IF - MITEQ, Inc.

6 BIT, 3.1–3.7 GHz

Frequency range 3.1–3.7 GHz

Peak phase error ±2° maximum

Phase 0–360° in 5.6° steps

Insertion phase variation ±2 dB maximum

Insertion loss 1.2 dB typical, 1.4 dB maximum

Input/output VSWR 1.4:1 maximum

Power 50 Watts CW maximum

Speed 0.5 ms maximum

Size 2.5" [63.5 mm] x 1.5" [38.1 mm]

x 0.5" [12.7 mm]

DC input +5/-15 V

DPS-03100370-360-6-1F-1F

8 BIT, 650–1550 MHz

Frequency range 650–1550 MHz

0 to 180° in 1.4° steps @ 650 MHz

Peak Phase error ±1° maximum

Phase (phase changes linearly w/frequency)

Insertion phase variation ±2 dB maximum

Insertion loss 1.5 dB typical, 1.7 dB maximum

Input/output VSWR 1.3:1 maximum

Power 20 Watts CW, 300 Watts Peak

Speed 300 ns maximum

Size 5.65" [143.51 mm] x 2.5" [63.5 mm]

x 0.56" [14.22 mm]

DC input +5/-15 V

DPS-00650155-180-8-IF-IF

SINGLE-POLE SINGLE-THROW SWITCHES

6 BIT, 1.2–1.4 GHz

4 BIT, 2.9–3.1 GHz

Phase states 4

0° (Ref.), 22.5°, 45°, 90°, 180°

Frequency range 2.9–3.1 GHz

Insertion loss 3 dB maximum

Input/output VSWR 1.5:1 maximum

Switching speed 25 ns maximum

Phase accuracy 1° maximum

Amplitude accuracy 0.25 dB maximum

Control TTL, “0” = Path on

Outline drawing 174339

DPS-02900310-360-2-1F-1F

Frequency range 1.2–1.4 GHz

Insertion loss 3.5 dB maximum

Insertion loss variation over ±3 dB maximum

phase range

Phase shift 0–360° minimum

Phase error ±3° maximum

Switching speed 200 ns maximum

Input/output VSWR 1.65:1 maximum

RF input power (working) +10 dBm maximum

RF input power (no damage) +20 dBm maximum

Outline drawing 174343

DPS-01200140-360-6-1F-1F

MITEQ offers a 6 bit, 6 to 18 GHz digital phase shifter operating as high as 18 GHz for EW applications. This

product offers exceptional power handling capability in excess of 25 dBm and switching speed of 20 ns maximum.

This device is ideally suited for phased array applications and interferometric receivers. We also offer a number of

narrowband analog phase shifters denoted in the Analog Phase Shifter Section that utilize switched line and

reflection phase shifter topologies.

DIGITAL PHASE SHIFTERS

FEATURES

• Optimized for fast switching speeds

(down to 20 ns maximum)

• Optimized for lowest phase deviation over band

• RMS phase error ≤3° typical

• Low insertion loss

• Power handling up to 30 dBm

• OIP3 (typically 25 dBm)

• Hermetic sealing available

100 Davids Drive, Hauppauge, NY 11788 • TEL: (631) 436-7400 • FAX: (631) 436-7430 • www.miteq.com

DIGITAL PHASE SHIFTERS (CONT.)

4 and 6 BIT, 0–360°, 5.03–5.09 GHz Design Family

Peak phase error 2° 2.5° 2° 2.5° 2.7° 3.3°

Phase 1.3° 1.5° 1.3° 1.5° 1.2° 1.4°

Insertion phase vs. temperature 0.3°/°C 1°/°C 0.05°/°C 0.1°/°C 0.05°/°C 0.1°/°C

Insertion phase variation unit to unit ±3° ±5° ±3° ±5° ±3° ±5°

Insertion loss, maximum 1.4 dB 1.5 dB 1.65 dB 1.75 dB 1.75 dB 1.85 dB

Insertion loss vs. phase and frequency 0.4 dB 0.5 dB 0.4 dB 0.5 dB 0.45 dB 0.6 dB

Loss ∆at any phase setting unit to unit ±0.18 dB ±0.25 dB ±0.18 dB ±0.25 dB ±0.25 dB ±0.3 dB

Operating power level 4W CW 10W CW 4W CW 10W CW 4W CW 10W CW

Switching speed 0.2 us 0.5 us 0.2 us 0.5 us 0.2 us 0.5 us

DC input +5/-15 V +5/-15 V +5/-15 V

Option #1 Option #2 Option #3

Low Loss High Stability High Stability

22.5° Steps 22.5° Steps 5.6° Steps

Parameters (Typ.) (Max.) (Typ.) (Max.) (Typ.) (Max.)

3 BIT, 9–10 GHz

Phase states 0° (Ref.), 90°, 180°, 270°

Frequency range 9–10 GHz

Insertion loss 7 dB maximum

Input/output VSWR 1.7:1 maximum

Switching speed 20 ns maximum

Phase accuracy ±5° maximum

Amplitude balance ±0.5 dB maximum

Control TTL, 2 lines

Logic truth table E1 E2 Phase

00 0°

0190°

1 0 180°

1 1 270°

DC power ±5 V @ 50 mA maximum

Outline drawing 174339

DPS-09001000-360-3-1F-1F

6 BIT, 7–14 GHz

RF frequency range 7–14 GHz

Insertion loss 10.5 dB typical,

11 dB maximum

Input/output VSWR 2.5:1 maximum

Phase shift 360° maximum

Phase shift step size 5.6° minimum

Phase error 3° typical midband,

6° maximum

Input third order intercept 40 dBm typical,

35 dBm maximum

DC power +5 VDC

Control input 6-bit TTL

Outline drawing 174340

DPS-07001400-360-6-IF-IF

RF frequency range 6–18 GHz

Insertion loss 15.5 dB maximum

Input/output VSWR 3:1 maximum

Phase shift 360° maximum

Phase shift step size 5.6° minimum

Phase error 3° typical midband,

6° maximum

Input third order intercept 40 dBm typical,

35 dBm maximum

DC power +5 VDC

Control input 6-bit TTL

Outline drawing 174340

DPS-06001800-360-6-5.6

100 Davids Drive, Hauppauge, NY 11788 • TEL: (631) 436-7400 • FAX: (631) 436-7430 • www.miteq.com

ORDERING INFORMATION

To order a digital phase shifter, please include the model number derived from the following table. If requesting a

quotation for a phase shifter not listed in this catalog, please consult MITEQ. Include any additional specifications

that are not listed when creating the model number.

DPS -06001800 -360 -6 -1F1F S

Digital Phase Shifter

Frequency Range

Start and stop sequentially rounded to the nearest MHz.

Example: 6 to 18 GHz would be 06001800

Phase Range

Example: 360 degrees would be -360

Number Of Bits

-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 bit

-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 bit

-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 bit

Input Connector

SMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

GPO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Please add F for female or M for male.

Output Connector

SMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

GPO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Please add F for female or M for male.

Special Technical Specification Requirements

If required they must be denoted on the purchase order . . . . . . . . S

Using the above information to order or request a phase shifter with other technical requirements placed in the purchase order

or in the RFQ documentation would result in ordering a DPS-06001800-360-6-1F1FS, a 6 to 18 GHz, 180° digital phase shifter

with other technical requirements denoted on purchase order. Other special technical specification requirements would typically

be switching speed, in/out VSWR, IIP3, size, etc.

ENVIRONMENTAL CONDITIONS

Operating temperature .................... 0 to 70°C

Storage temperature ........................ -30 to +85°C

Humidity............................................ 95% noncondensing

Vibration............................................ 12 g’s rms, 20-2000 Hz per

MIL-STD-810B Method 514,

Procedure 5

100 Davids Drive, Hauppauge, NY 11788 • TEL: (631) 436-7400 • FAX: (631) 436-7430 • www.miteq.com

SINGLE-POLE SINGLE-THROW SWITCHES

DIGITAL PHASE SHIFTER OUTLINE DRAWINGS

"SMA" FEMALE

CONNECTOR,

TYP. (2) PLACES

0.104 [2.642] THRU

TYP. (4) HOLES

OUT

GND

+5V

-5V

0.13

[3.30]

TYP.

1.50

[38.10] 0.75

[19.05]

0.57 [14.48]

1.34

[34.04]

0.03 [0.76] DIA. PIN

TYP. (8) PLACES

0.44 [11.18]

0.11 [2.79] TYP. 1.56 [39.62]

0.86 [21.84] 1.72 [43.69]

1.25 [31.75]

1.00 [25.40] Ø0.104 [2.642]

0.88 [22.35]

0.81 [20.57]

0.56 [14.22]

0.37 [9.40]

0.10 [2.54]

PIN "1"

1.55 [39.37]

1.75 [44.45]

J1 J2

13 PIN OUT

PIN FUNCTION

NUMBER (DEG.)

1 180°

290°

345°

4 22.5°

5 11.25°

65.6°

7 GND

8 +5 VDC

9 not used

174339

174340

100 Davids Drive, Hauppauge, NY 11788 • TEL: (631) 436-7400 • FAX: (631) 436-7430 • www.miteq.com

±.020

[0.508]

±.010

[0.254]

±.010

[0.254]

0.15

[3.81]

±.004

0.19

[4.826]

±.010

[0.254]

1.500

[38.10]

1.00

[25.40]

±.020

[0.508]

0.25 [6.35]

±.004 [0.101]

±.004

[0.101]

0.19

[4.826]

±.010

[0.254]

±.010

[0.254]

0.98

[24.89]

±.010

[0.254]

1.01

[25.65]

5.70 [144.78] ±.010 [0.254]

0.15 [3.81] ±.010 [0.254]

6.00 [152.4] ±.020 [0.508]

POWER CONNECTOR

9 PIN "D" CONNECTOR

.090 [2.286] DIA. THRU

4 HOLES

SMA CONNECTOR, FEMALE

SOUTHWEST MICROWAVE

P/N 214-26SF OR

EQUIVALENT 2 PLACES

PIN "1"

POWER CONNECTOR

PIN ASSIGNMENTS

PIN DESIGNATION

1 5.625°

2 11.25°

3 22.5°

445°

590°

6 180°

7 GND

8 +15V

9 -15V

174343

GENERAL NOTES:

1. Dimensions shown in brackets [ ] are in millimeters.

2. Unless specified, all connectors are type SMA female field replaceable.

3. Tolerance as follows:

.xx = ±0.01 [.xx = ±0.25]

.xxx = ±0.005 [.xxx = ±0.13]