www.erni.com
Enclosures LDG-A
Catalog E 074485 06/10 Edition 2
Catalog E 074485 06/10 Edition 2 www.erni.com
www.erni.com
Catalog E 074483 06/10 Edition 2 www.erni.com 1
General information about LDG-A enclosures .................................................................2
Technical Data .........................................................................................3
Temperature Range ..................................................................................... 3
The base for economical and compact packaging of your electronics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Terminal block design and type overview ..................................................................... 5
Pluggable terminals and blind inserts .......................................................................6
Flexibility for customized solutions ..........................................................................7
Enclosure versions with ventilation slots......................................................................8
Enclosure LDG-A 12 ....................................................................................9
Enclosure LDG-A 14 ...................................................................................12
Enclosure LDG-A 16 . ..................................................................................14
Enclosure LDG-A 30 ...................................................................................16
Enclosure LDG-A 46 ...................................................................................18
Enclosure LDG-A 70 ...................................................................................20
Enclosures LDG-A
Table of Contents
2 Catalog E 074485 06/10 Edition 2 www.erni.com
Enclosures LDG-A
Types
LDG-A-12, max. 12 screw clamp terminals
LDG-A-14, max. 14 screw clamp terminals
LDG-A-16, max. 16 screw clamp terminals
LDG-A-30, max. 30 screw clamp terminals
LDG-A-46, max. 46 screw clamp terminals
LDG-A-70, max. 70 screw clamp terminals
General
The LDG-A series of enclosures are fully insulated enclosures.
The screw clamp terminals are protected against accidental
contact in accordance with VDE 0100 Part 570, VDE 0160
Part 100 and VBG 4.
Designed for easy installation, these screw terminals can be
soldered by wave, allowing the manufacturing of the PCB
boards in one step.
Features
• Snap-in design for fast end assembly
• Complete assembly of the unit outside of the housing
before
end assembly
• Robust self locking vibration proof terminal block screws
• Protection against accidental human contact
• Transparent cover for LED indicators
• Suitable frame inserts for pluggable standard connectors
• Base parts with and without ventilation slots
• Base part metallized
• Compact and attractive design
• Wall and DIN rail mountable
Catalog E 074483 06/10 Edition 2 www.erni.com 3
Enclosures LDG-A
Technical Data
Inside temperature 95°
Ambient temperature
Dissipation in W
Enclosure
Typ
LDG-A- AB
12
23°C 50°C 70°C
C A B C A B C
8635422,521
14 12 10 7 7 6 4 4 3 2
16 13 11 9 8 7 5 4 3,5 3
30 19 18 16 12 11 10 7 6 5
46 26 23 20 16 14 12 9 8 7
70 36 33 30 23 21 19 12 10 11
Temperature Range
A = Both side faces not obstructed, free airflow
B = One side face blocked by obsruction, 0 mm away
C = Both side face blocked by obsruction, 0 mm away
Type LDG-A-12 LDG-A-14 LDG-A-16 LDG-A30 LDG-A-46 LDG-A-70
Degree of protection IP20
Air distances ≥ 3 mm ≥ 4 mm
Creepage distances ≥ 3.2 mm ≥ 5 mm
Voltage rating (IEC 60664) The permissible operating voltages depend on the customer application and on the applicable or specified safety require-
ments. Insulation coordination according to IEC 60664-1 has to be regarded for the complete electrical device. Therefore, the
maximum creepage and clearance distances of the mated connectors are specified for consideration as a part of the whole
current path. In practice, reductions in creepage or clearance distances may occur due to the conductive pattern of the prin-
ted board or the wiring used, and have to be taken into account separately. As a result the creepage and clearance distances
for the application may be reduced compared to those of the connector.
Screw clamp steel, tin plated
Terminal wire size max. 2.5 mm2 max. 4 mm2
current rating max. 16 A max. 20 A
tightening torque max. 0.4 Nm
material CuSn6 Ms
Terminal pin plating 2 µm Ni 2 µm Ni
5 µm Sn 5 µm Sn
Temperature range -40° C ... +110° C
Base part PC (30% GF), RAL 7032, UL 94 V-1
Terminal block housing, blind plug, cover PC, UL 94 V-2
Frame insert and blind insert PC, UL 94 V-0
Outside dimensions L x B x H
75 x 22.5 x 98.5 mm
75 x 45 x 110 mm 75 x 55 x 110 mm
75 x 99.7 x 110 mm
75 x 150 x 110 mm 75 x 225 x 110 mm
75 x 22.5 x 110 mm
Aprovales UL File E 84703
CSA File LR 62504
4 Catalog E 074485 06/10 Edition 2 www.erni.com
Enclosures LDG-A
The base for all applications
Fully-insulated enclosures in accordance with machinery
and automotive industry standards, with shockproof
terminals acc. to VDE 0100 and VBG 4.
Base part optionally with or without ventilation slots.
Enclosure surface with erosion-structure in attractive design.
Easy assembly and disassembly for servicing.
Easy connecting technique
From the connection cable via the terminal block to the
PC board, the connection could not be more simple.
Generously dimensioned stacking compartment
Printed circuit boards can be stacked one above the other
such that complex assemblies can be implemented in
compact dimensions.
Fast component-mounting and manufacturing times
The PC board, with the mounted components and terminal
blocks will be wave-soldered, in one work process and
then completely assembled into the base part in one step.
Just snap them on
LDG-A enclosures have a snap-on clip for easy snap-on
assembly for standard DIN rails acc. to DIN 46277 and
DIN EN 50022.
Catalog E 074483 06/10 Edition 2 www.erni.com 5
Enclosures LDG-A
Terminal block design and type overview
LDG-A 12
Length: 75 mm
Width: 22.5 mm
Height: 98.5 mm
or 110 mm
LDG-A 14
Length: 75 mm
Width: 45 mm
Height: 110 mm
LDG-A 16
Length: 75 mm
Width: 55 mm
Height: 110 mm
LDG-A 30
Length: 75 mm
Width: 99.7 mm
Height: 110 mm
LDG-A 46
Length: 75 mm
Width: 150 mm
Height: 110 mm
LDG-A 70
Length: 75 mm
Width: 225 mm
Height: 110 mm
LDG-A 14, 16, 30, 46, 70
1 Terminal clamp
2 Terminal pin
3 Terminal block housing
4 Blind plug
1 Terminal clamp
2 Terminal pin, short
2a Terminal pin, long
3 Terminal block housing, narrow
3a Terminal block housing, wide
4 Blind plug
6 Catalog E 074485 06/10 Edition 2 www.erni.com
Enclosures LDG-A
Plugable terminals and blind inserts
Description Color Part no.
LDG-A-16
Frame insert with
top cutout black
Frame insert with
bottom cutout black
Blind insert black
LDG-A-30
Frame insert with
top cutout black
Frame insert with
bottom cutout black
Blind insert black
LDG-A-46
Frame insert with
bottom insert black
Blind insert black
LDG-A-70
Blind insert black
Frame inserts with cut-out for comercially available
pluggable terminal connectors
Features:
• Used as assembly and guide element for the PC board
with guides for transverse board and longitudinal board
offset by 90°.
• Compact design for secure snap-on and safe fixing on
the base part.
• Screw-on option for the cover.
Frame insert with top cutout for separate pin header.
You will have the maximum component space on the
PC board.
Frame insert with bottom cutout allows the assembly
of a transverse board.
The blind insert provides for the full covering of the base
part. Individual customized cutouts achieved by mechanical
machining or special tool inserts are easy to be realized.
Technical data
Material of plastic parts: PC
UL 94 V-0
Color: black
special colors upon request
Temperature range: -40°C up to +110°C
Ordering information
Connection of commercially available screw-plug
connectors.
Frame insert with top cutout for separate pin header. For
maximum component space on the longitudinal board.
Easy service and device exchange
053869
053870
053871
034769
053164
053074
054248
054249
054730
Catalog E 074483 06/10 Edition 2 www.erni.com 7
Enclosures LDG-A
Flexibility for customized solutions
Cover in grey, black or
transparent for display functions
Various colors, e. g. company color for base part, cover or terminal block possible
Customized cutouts and holes
in covers and blind inserts
8 Catalog E 074485 06/10 Edition 2 www.erni.com
Enclosures LDG-A
Versions with ventilation slots
Effective heat dissipation for electronic subassemblies with increased heating
Base part with ventilation slots
- availiable for enclosure versions LDG-A-12,
LDG-A-16, LDG-A-30, LDG-A-46, LDG-A-70
- slot dimension: 42 x 3 mm
- additional data upon request
Description Color Part no.
Base part with
ventilation slots
LDG-A-12 light grey
LDG-A-16 light grey
LDG-A-30 light grey
LDG-A-46 light grey
LDG-A-70 light grey
Ordering information
114932
024870
434098
024080
424328
Catalog E 074483 06/10 Edition 2 www.erni.com 9
Enclosures LDG-A
LDG-A 12
Description Type Color Part Number
Base part 110 mm w/o ventilation slot light grey
Base part 110 mm with ventilation slot light grey
Base part 98,5 mm w/o ventilation slot light grey
Cover transparent
Cover light grey
Terminal block housing right black
Terminal block housing left black
Terminal pin right, long
Terminal pin right, medium
Terminal pin right, short
Terminal pin left, long
Terminal pin left, medium
Terminal pin left, short
Clamp, not assembled
Terminal block, fully loaded right black
Terminal block, fully loaded left black
Blind plug black
• For max. 12 screw clamp terminals, 6 on each side
• Partial loaded terminal blocks with blind plugs
• PCB board arrangement see drawing
Length: 75 mm
Width: 22.5 mm
Height: 98.5 mm or 110 mm
Ordering information
024082
114932
414470
414462
414463
414453
414455
224082
224079
224078
224081
224077
224080
414469
043853
043860
414466
10 Catalog E 074485 06/10 Edition 2 www.erni.com
Enclosures LDG-A
LDG-A 12
Dimensions: low height version
ISO 1481-ST 2,2x6,5
Deckel
Cover
Klemmengehäuse, links
Terminal housing, left
Querplatine
Crosswise circuit board
Printklemmstift, links
PCB terminal pin, left
Schraubenloch für Blechschraube
Hole for tapping scr ew
Gehäuse-Unterteil
Housing base
Klemmengehäuse, rechts
Terminal housing, right
Printklemmstift, rechts
PCB terminal pin, right
Klemme
Terminal
Blindstopfen /
Rastschieber
Sliding catch
Längsplatine
Lengthwise circuit board
5
35,5 13,5
5,5
1,7
55,5
72
1,8
3,1
15,55x3,1=
4,5
2,8
14,1
89,2
23
25
15 °
92
1
75
72
11,7
14,5
2,55
5,6
5,6
3,2
20,1 1,2
22,5
98,5
17,4
19,8
8
17
Blind plug
(in place of terminal and terminal pin)
lang, mittel, kurz
long, middle, short
lang, mittel, kurz
long, middle, short
(anstelle Klemme und Print-Klemmstift)
Höhe ist abhängig von der
Einbaulage der Querplatine
Belegungsgrenze ist abhängig von
der Einbaulage der Querplatine
Belegungsgrenze für Bauelemente
24,5
17,5 -0,3
22
1,6
14,1max.
1,2 +0,1
17,4
5,5
8,5
17,25
54
2,6 +0,1
1-0,1
22,5
29,21
36,83
48
52,07
54,61
61
70
71,5 -0,3
4,445
13,9710,16
15,2
17,78
5,08
5,08
33,7
34,29
5,08
5,08
88,5
41,5
1,5
19
13,25
15 °
56 °
47
1)
1)
/ Crosswise circuit board
height depends on location of
the crosswise circuit board
1)
length available for components
depends on the location of the
crosswise circuit board
/ Lengthwise circuit board
mounting limit for components
Querplatine
Längsplatine
Recommended PCB dimensions
all dimensions in mm
all dimensions in mm
Catalog E 074483 06/10 Edition 2 www.erni.com 11
Enclosures LDG-A
LDG-A 12
Dimensions: standard height version
ISO 1481-ST 2,2x6,5
Deckel
Cover
Klemmengehäuse, links
Terminal housing, left
Querplatine
Crosswise circuit board
Printklemmstift, links
PCB terminal pin, left
Schraubenloch für Blechschraube
Hole for tapping scr ew
Gehäuse-Unterteil
Housing base
Klemmengehäuse, rechts
Terminal housing, right
Printklemmstift, rechts
PCB terminal pin, right
Klemme
Terminal
Blindstopfen /
Rastschieber
Sliding catch
Längsplatine
Lengthwise circuit board
5
35,5 13,5
5,5
1,7
67
83,5
1,8
3,1
15,55x3,1=
4,5
2,8
14,1
100,7
23
25
15 °
103,5
1
75
72
11,7
14,5
2,55
5,6
5,6
3,2
20,1 1,2
22,5
110
17,4
19,8
8
17
Blind plug
(in place of terminal and terminal pin)
lang, mittel, kurz
long, middle, short
lang, mittel, kurz
long, middle, short
(anstelle Klemme und Print-Klemmstift)
Höhe ist abhängig von der
Einbaulage der Querplatine
/ Crosswise circuit board
height depends on location of
the crosswise circuit board
Belegungsgrenze ist abhängig von
der Einbaulage der Querplatine
/ Lengthwise circuit board
Belegungsgrenze für Bauelemente
24,5
17,5 -0,3
22
1,6
14,1max.
1,2 +0,1
17,4
5,5
8,5
17,25
65,5
2,6 +0,1
1-0,1
22,5
29,21
36,83
48
52,07
54,61
61
70
71,5 -0,3
4,445
13,9710,16
15,2
17,78
5,08
5,08
33,7
34,29
5,08
5,08
100
53
1,5
19
13,25
15 °
56 °
47
1)
1)
1)
length available for components
depends on the location of the
crosswise circuit board
mounting limit for components
Querplatine
Längsplatine
Recommended PCB dimensions
all dimensions in mm
all dimensions in mm
12 Catalog E 074485 06/10 Edition 2 www.erni.com
Description Type Color Part Number
Base part w/o ventilation slots light grey
Cover light grey
Cover transparent
Cover black
Terminal block housing narrow black
Terminal block housing wide black
Terminal pin short
Terminal pin long
Clamp, not assembled
Terminal block, fully loaded narrow black
Terminal block, fully loaded wide black
Blind plug black
Enclosures LDG-A
LDG-A 14
Ordering information
423280
423273
423272
423274
423275
423277
224076
224074
154562
914810
914820
103006
• For max. 14 screw clamp terminals , 7 on each side
• Partial loaded terminal blocks with blind plugs
• PCB board arrangement see drawing
Length: 75 mm
Width: 45 mm
Height: 110 mm
Catalog E 074483 06/10 Edition 2 www.erni.com 13
Schraubenloch für Blechschraube
Hole for tapping scr ew
ISO 1481-ST 2,2x6,5
45,8
50,4
75
35,5
15 °
1,8
3,3
9,93x3,3=
5,1
15
18,8
12,2
5
69,8
86,5
100,5
103,3
1,7
5,5
13,5
5,9
35,46x5,9=
42,2
45
1,8
3
23,6
110
76,3
2,8
8
82,1
1,8
12
39,8
72
40,2
17
(anstelle Klemme und Print-Klemmstift)
Cover
Terminal housing (narrow)
Crosswise circuit board
PCB terminal pin (short)
Lengthwise circuit board
Housing base
Terminal housing (wide)
PCB terminal pin (long)
Terminal
/ Blind plug
(in place of terminal and terminal pin)
Sliding catch
Print-Klemmstift (lang)
Klemme
Blindstopfen
Rastschieber
Gehäuse-Deckel
Klemmengehäuse (schmal)
Querplatine
Print-Klemmstift (kurz)
Längsplatine
Gehäuse-Unterteil
Klemmengehäuse (breit)
Enclosures LDG-A
LDG-A 14
Dimensions
49,6
42,2
-0,3
45
1,6
12,2max.
23,6 0,1
35,4 0,1
6x5,9=
41,7 -0,3
68,8
75,8
81,6
85,5min.
99,5max.
8,5
40,2
1,6
1618
1,6
+0,1
13,5
1,7
21,5 2,6
+0,1
1)
/ Crosswise circuit board
1)
1)
1)
/ Lengthwise circuit board
height depends on location of
the crosswise circuit board
1)
mounting limit for components
as drawn or mirror image
Note: reduced space for components in the cor ner are a
bei breitem Klemmengehäuse
bei schmalem Klemmengehäuse
/ center of housing
for narrow terminal housing
for wide terminal housing
Querplatine
Längsplatine
Höhe ist abhängig von der
Einbaulage der Querplatine
Belegungsgrenze für Bauelemente
wie gezeichnet bzw . spiegelbildlich
Achtung: Im Eckenbereich verringerte Einbauhöhen
Mitte Gehäuse
430
Recommended PCB dimensions
all dimensions in mm
all dimensions in mm
14 Catalog E 074485 06/10 Edition 2 www.erni.com
Enclosures LDG-A
LDG-A 16
• For max. 16 screw clamp terminals, 8 on each side
• Partial loaded terminal blocks with blind plugs
• PCB board arrangement see drawing
• Special frames for pluggable standard connectors availa-
ble
Length: 75 mm
Width: 55 mm
Height: 110 mm
Ordering information
414124
024870
014415
014416
014417
103031
103033
103032
103034
224076
224074
154562
914830
914840
103006
053869
053870
053871
Description Type Color Part Number
Base part w/o ventilation slots light grey
Base part with ventilation slots light grey
Cover light grey
Cover transparent
Cover black
Terminal block housing narrow black
Terminal block housing narrow blue
Terminal block housing wide black
Terminal block housing wide blue
Terminal pin short
Terminal pin long
Clamp, not assembled
Terminal block, fully loaded narrow black
Terminal block, fully loaded wide black
Blind plug black
Frame insert for pluggable
connectors Top cutout black
Frame insert for pluggable
connectors Bottom cutout black
Blind insert black
Catalog E 074483 06/10 Edition 2 www.erni.com 15
Schraubenloch für Blechschraube
Hole for tapping screw
ISO 1481-ST 2,2x6,5
70
86,4
100,7
1,8
2,5
104x2,5=
45,8
50,4
75
5,3
12,5
15,3
19,1
35,5
15 °
5
103,5
1,7
5,5
13,5
6
30
427x6
=
52
55
1,8
3
3,7
76,5
82,3
110
13,8
8
2,8
15 °
2,5
43,5
60
62,5
4,5
1,8
12
39,8
37,5
50
72
R6,5
17
(anstelle Klemme und Print-Klemmstift)
Cover
Terminal housing (narrow)
Crosswise circuit board
PCB terminal pin (short)
Lengthwise circuit board
Housing base
Terminal housing (wide)
PCB terminal pin (long)
Terminal
/ Blind plug
(in place of terminal and terminal pin)
Sliding catch
Print-Klemmstift (lang)
Klemme
Blindstopfen
Rastschieber
Gehäuse-Deckel
Klemmengehäuse (schmal)
Querplatine
Print-Klemmstift (kurz)
Längsplatine
Gehäuse-Unterteil
Klemmengehäuse (breit)
all dimensions in mm
Enclosures LDG-A
LDG-A 16
Dimensions
49,6
52
-0,3
45
1,6
12,5max.
30 0,1
42 0,1
7x6
=
51,5 -0,3
69
76
81,8
85,4min.
99,7max.
8,5
50
14
43,5
3,3
15
°
1,6
16
1,6
+0,1
43,5
18
2,6
+0,1
21,5
3,3
1,7
12,6
13,6
15 °
15 °
1)
/ Crosswise circuit board
1)
1)
1)
/ Lengthwise circuit board
height depends on location of
the crosswise circuit board
1)
mounting limit for components
as drawn or mirror image
reduced space for components in the cor ner area
Note:
bei breitem Klemmengehäuse
bei schmalem Klemmengehäuse
for wide terminal housing
for narrow terminal housing
/ center of housing
Querplatine
Längsplatine
Höhe ist abhängig von der
Einbaulage der Querplatine
Belegungsgrenze für Bauelemente
wie gezeichnet bzw . spiegelbildlich
Achtung: Im Eckenbereich verringerte Einbauhöhen
430
Mitte Gehäuse
Recommended PCB dimensions
all dimensions in mm
16 Catalog E 074485 06/10 Edition 2 www.erni.com
Enclosures LDG-A
LDG-A 30
• For max. 30 screw clamp terminals, 15 on each side
• Partial loaded terminal blocks with blind plugs
• PCB board arrangement see drawing
Usage of standard connectors
• Special frames for pluggable standard connectors
available
• Pitch of 5.08 mm allows connection of 17 wires on
each side
Length: 75 mm
Width: 99.7 mm
Height: 110 mm
Ordering information
414165
434098
413962
413963
413964
413966
413965
413968
413967
224076
224074
154562
914850
914860
103006
034769
053164
053074
Description Type Color Part Number
Base part w/o ventilation slots light grey
Base part with ventilation slots light grey
Cover light grey
Cover transparent
Cover black
Terminal block housing narrow black
Terminal block housing narrow blue
Terminal block housing wide black
Terminal block housing wide blue
Terminal pin short
Terminal pin long
Clamp, not assemnbled
Terminal block, fully loaded narrow black
Terminal block, fully loaded wide black
Blind plug black
Frame insert for pluggable
connectors Top cutout black
Frame insert for pluggable
connectors Bottom cutout black
Blind insert black
Catalog E 074483 06/10 Edition 2 www.erni.com 17
Dimensions
Enclosures LDG-A
LDG-A 30
Recommended PCB dimensions
auf Wunsch mit Lüftungsschlitzen
with ventilation holes on request
Schraubenloch für Blechschraube
Hole for tapping screw
ISO 1481-ST 2,2x6,5
70
100,7
45,8
50,4
75
35,5
15 °
86,7
9,93x3,3=
3,3
1,8
5,1
12,2
15
18,8
5
103,5
5,5
13,5
1,7
72
1,8
3
6
8414x6=
96,7
99,7
3,7
43,5
76,5
110
42
3
5,2
12,4
15 °
2,8
82,3
8
1,8
12
39,8
72
60
62,5
94,7
85
4,5
R6,5
17
(anstelle Klemme und Print-Klemmstift)
Cover
Terminal housing (narrow)
Crosswise circuit board
PCB terminal pin (short)
Lengthwise circuit board
Housing base
Terminal housing (wide)
PCB terminal pin (long)
Terminal
/ Blind plug
(in place of terminal and terminal pin)
Sliding catch
Print-Klemmstift (lang)
Klemme
Blindstopfen
Rastschieber
Gehäuse-Deckel
Klemmengehäuse (schmal)
Querplatine
Print-Klemmstift (kurz)
Längsplatine
Gehäuse-Unterteil
Klemmengehäuse (breit)
45
69
76
81,8
85,7min.
99,7max.
12,6
43,5
15
°
3,3
18
2,6 +0,1
1,6 +0,1
12,6
13,6
1,7
3,3
21,7
43,5
15 °
15 °
/ Crosswise circuit board
1)
/ Lengthwise circuit board
height depends on location of
the crosswise circuit board
1)
mounting limit for components
as drawn or mirror image
Note: reduced space for components in the cor ner area
bei breitem Klemmengehäuse
bei schmalem Klemmengehäuse
for narrow terminal housing
for wide terminal housing
/ center of housing
96.7 -0.3
49.6
1.6
max. 12.2
Querplatine
1)
8.5
94.7
72 ±0.1
14x6= 84 ±0.1
96.2 -0.3
1)
1)
Längsplatine
Höhe ist abhängig von der
Einbaulage der Querplatine
Belegungsgrenze für Bauelemente
wie gezeichnet bzw . spiegelbildlich
Achtung: Im Eckenbereich verringerte Einbauhöhen
1.6
16
430
Mitte Gehäuse
all dimensions in mm
all dimensions in mm
18 Catalog E 074485 06/10 Edition 2 www.erni.com
Enclosures LDG-A
LDG-A 46
Ordering information
• For max. 46 screw clamp terminals, 23 on each side
• Partial loaded terminal blocks with blind plugs
• PCB board arrangement see drawing
Usage of standard connectors
• Special frames for pluggable standard connectors
available
• Pitch of 5.08 mm allows connection of 26 wires on
each side
Length: 75 mm
Width: 150 mm
Height: 110 mm
024078
024080
014818
014819
014820
014649
014790
224076
224074
154562
914890
914900
103006
054248
054249
Description Type Color Part Number
Base part w/o ventilation slots light grey
Base part with ventilation slots light grey
Cover light grey
Cover transparent
Cover black
Terminal block housing narrow black
Terminal block housing wide black
Terminal pin short black
Terminal pin long black
Clamp, not assemnbled
Terminal block, fully loaded narrow black
Terminal block, fully loaded wide black
Blind plug black
Frame insert for pluggable
connectors Bottom cutout black
Blind insert black
Catalog E 074483 06/10 Edition 2 www.erni.com 19
Dimensions
Enclosures LDG-A
LDG-A 46
Hole for tapping screw
ISO 1481-ST 2,2x6,5
Schraubenloch für Blechschraube
17
35,5
4,9
2,5
5
68,8
85,5
99,5
102,3
1,8
3,3
6,62x3,3=
39,8
45,8
50,4
75
18,8
15
12,5
15 °
12,3
1,8
6
81,1
75,3
110
13222x6=
144
149
120
3
12,4
2,6
43,3
15 °
10
3
5,2
42
4,6
70
1,8
12
39,8
4,5
134,3
142
60
62,5
R7,5
(anstelle Klemme und Print-Klemmstift)
Cover
Terminal housing (narrow)
Crosswise circuit board
PCB terminal pin (short)
Lengthwise circuit board
Housing base
Terminal housing (wide)
PCB terminal pin (long)
Terminal
/ Blind plug
(in place of terminal and terminal pin)
Sliding catch
Special screw
auf Wunsch mit Lüftungsschlitzen
with ventilation holes on request
Print-Klemmstift (lang)
Klemme
Blindstopfen
Rastschieber
Gehäuse-Deckel
Klemmengehäuse (schmal)
Querplatine
Print-Klemmstift (kurz)
Längsplatine
Gehäuse-Unterteil
Sonderschraube
Klemmengehäuse (breit)
144
-0,3
39
2,2
43,3
12,6
15 °
2,2
2,5
20,6
43,3
12,6
15 °
15 °
/ Crosswise circuit board
1)
/ Lengthwise circuit board
height depends on location of
the crosswise circuit board
1)
mounting limit for components
as drawn or mirror image
reduced space for components in the cor ner area
Note:
bei breitem Klemmengehäuse
bei schmalem Klemmengehäuse
for wide terminal housing
for narrow terminal housing
/ center of housing
49.6
1.6
max. 12.2
1)
Querplatine
120 ±0.1
22x6= 132 ±0.1
143.5 -0.3
74.8
80.6
min. 84.5
max. 97.2
142
10.5
1)
1)
67.8
Längsplatine
Höhe ist abhängig von der
Einbaulage der Querplatine
Belegungsgrenze für Bauelemente
wie gezeichnet, bzw . spiegelbildlich
Achtung: Im Eckenbereich verringerte Einbauhöhen
1.6
Ø1.6
+0.1
Ø2.6
+0.1
18 15
429
Mitte Gehäuse
Recommended PCB dimensions
all dimensions in mm
all dimensions in mm
20 Catalog E 074485 06/10 Edition 2 www.erni.com
Enclosures LDG-A
LDG-A 70
Ordering information
424327
424328
424243
424244
424245
424240
424239
424242
424241
224076
224074
154562
914870
914880
103006
054730
• For max. 70 screw clamp terminals,
35 on each side, clamp pitch 6 mm
• Partial loaded terminal blocks with blind plugs
• PCB board arrangement see drawing
Usage of standard connectors
• Special frames for pluggable standard connectors
available
• Pitch of 5.08 mm allows connection of 41 wires on
each side
Length: 75 mm
Width: 225 mm
Height: 110 mm
Description Type Color Part Number
Base part w/o ventilation slots light grey
Base part with ventilation slots light grey
Cover light grey
Cover transparent
Cover black
Terminal block housing narrow black
Terminal block housing narrow blue
Terminal block housing wide black
Terminal block housing wide blue
Terminal pin short
Terminal pin long
Clamp, not assemnbled
Terminal block, fully loaded narrow black
Terminal block, fully loaded wide black
Blind plug black
Blind insert black
Catalog E 074483 06/10 Edition 2 www.erni.com 21
Dimensions
Enclosures LDG-A
LDG-A 70
Hole for tapping screw
ISO 1481-ST 2,2x6,5
Schraubenloch für Blechschraube
auf Wunsch mit Lüftungsschlitzen
with ventilation holes on request
17
5
68,8
1,8
3,3
6,62x3,3=
85,5
99,5
102,3
35,5 12,5
4,9
2,5
15
°
75
50,4
39,8
45,8
18,8
15
12,3
10
192
1,8
3
4,6
20434x6=
6
224,7
219,7
110
81,1
75,3
43,3
2,6
12,4
15
°
3
5,2
42
210
75
217,7
60
62,5
1,8
12
39,8
R7,5
4,5
70
(anstelle Klemme und Print-Klemmstift)
Cover
Terminal housing (narrow)
Crosswise circuit board
PCB terminal pin (short)
Lengthwise circuit board
Housing base
Terminal housing (wide)
PCB terminal pin (long)
Terminal
/ Blind plug
(in place of terminal and terminal pin)
Sliding catch
Special screw
Print-Klemmstift (lang)
Klemme
Blindstopfen
Rastschieber
Gehäuse-Deckel
Klemmengehäuse (schmal)
Querplatine
Print-Klemmstift (kurz)
Längsplatine
Gehäuse-Unterteil
Sonderschraube
Klemmengehäuse (breit)
219,7 -0,3
39
192 0,1
204 0,1
34x6=
219,2 -0,3
10,5 10,5
75
217,7
43,3
2,2
12,6
15 °
2,2
2,5
20,6
43,3
12,6
15 °
15 °
1)
/ Crosswise circuit board
1)
1)
1)
/ Lengthwise circuit boar d
height depends on location of
the crosswise circuit board
1) mounting limit for components
as drawn or mirror image
reduced space for components in the corner area
Note:
bei breitem Klemmengehäuse
bei schmalem Klemmengehäuse
/ center of housing
for narrow terminal housing
for wide terminal housing
49.6
1.6
max. 12.2
Querplatine
74.8
80.6
min. 84.5
max. 97.2
67.8
Längsplatine
Höhe ist abhängig von der
Einbaulage der Querplatine
Belegungsgrenze für Bauelemente
wie gezeichnet, bzw . spiegelbildlich
Achtung: Im Eckenbereich verringerte Einbauhöhen
1.6
Ø1.6 +0.1
Ø2.6 +0.1
18 15
429
Mitte Gehäuse
Recommended PCB dimensions
all dimensions in mm
all dimensions in mm
Catalog E 074485 06/10 Edition 2 www.erni.com
Europe South America Africa Japan
North America Canada Mexico
Asia Australia New Zealand
ERNI Electronics GmbH & Co. KG
Seestrasse 9
73099 Adelberg/Germany
Tel +49 7166 50-0
Fax +49 7166 50-282
info@erni.de
ERNI Electronics Inc.
2201 Westwood Ave
Richmond, VA 23230/USA
Tel +1 804 228-4100
Fax +1 804 228-4099
info@erni.us
ERNI Asia Holding Pte Ltd
23A Serangoon North Avenue 5
#04-11
Singapore 554369
Tel +65 6 555 5885
Fax +65 6 555 5995
info.sg@erni.com
www.erni.com
© ERNI Electronics GmbH & Co. KG 2010 • Printed in Germany. A policy of continuous improvement is followed and the right to alter any published data without notice is reser-
ved. ERNI®
, MicroStac®
, MicroSpeed®
, MiniBridge®
, MaxiBridge®
, ERmet®
, ERmet ZD®
, ERbic® and ERNIPRESS® are trademarks (registered or applied for in various countries) of
ERNI Electronics GmbH & Co. KG.
