Features––––––––––––––––––––––––
• Both crimp style and insulation displacement
receptacles can be used
Both crimp style and insulation displacement HR connector
receptacles can be accommodated by the HM connector.
• Housing-to-terminal locks
Spring action housing-to-terminal locks are an inherent part of
the housing, and assure smooth contact insertion and firm
contact retention yet with low insertion force.
• Mountable on a variety of panels
Due to our unique panel installation locking mechanisms, the
housing can be easily installed on panels of various thicknesses
without using tools.
• Highly reliable housing construction
Since all of the contacts are individually and totally surrounded
by housing walls, the contacts are protected from deformation
from outside sources of stress or from mismating. The
polarized housing shape prevents reverse connection.
Specifications –––––––––––––––––––
• Current rating: Crimp style HR connectors type
3A AC, DC max.
Insulation displacement HR connectors type
2A AC, DC max.
• Voltage rating: 250V AC, DC max. (See Note below.)
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ω max.
After environmental testing/20m Ω max.
• Insulation resistance: 500M Ω min.
• Withstanding voltage: 1,000V AC/minute
• Applicable wire: AWG #26 to #22
0.13 to 0.33mm2
• Applicable panel thickness: 0.8 to 1.6mm(.031" to .063")
Note: Contacts are exposed at the housing lances.
Care should be taken so that these parts do not touch the
metal section of the chasis.
* Contact JST for details.
Standards–––––––––––––––––––––––
0RecognizedE60389
1CertifiedLR20812