Low Voltage Surface Mount
500 mW Avalanche Diodes
Microsemi
Scottsdale Division Page 1
Copyright © 2003
10-31-2003 REV B
WWW.Microsemi .COM
SCOTTSDALE DIVISION
IN5518BUR-1 thru 1N5546BUR-1
(o
r MLL
55
1
8
B-1
t
hr
u
MLL
55
4
6
B-1
)
DESCRIPTION APPEARANCE
The 1N5518BUR-1 thru 1N5546BUR-1 series of 0.5 watt glass surface
mount Zener voltage regulators provides a selection from 3.3 to 33 volts in
standard 5% tolerances as well as tighter tolerances identified by different
suffix letters on the part number. These have an internal-metallurgical-bond
option as identified by the “–1” suffix. This internally bonded Zener package
construction is also in JAN, JANTX, and JANTXV military qualifications.
Microsemi also offers numerous other Zener products to meet higher and
lower power appli cation s.
DO-213AA
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLIC ATIONS / BENEFITS
Surface mount equivalent to JEDEC registered
1N5518 thru 1N5546 seri es
Internal metallurgical bond with the “-1” suffix
Also available in JAN, JANTX, and JANTXV
qualifications per MIL-PRF-19500/437 by adding
the JAN, JANTX, or JANTXV prefixes to part
numbers for desired level of screening; (e.g.
JANTX1N4099UR-1, JANTXV1N4109CUR-1, etc.)
Nonbonded types also available without the “-1”
suffix for both the axial and surface mount
packages
DO-7 or DO-35 glass body axial-leaded Zener
equivalents also availab le per JEDEC registration
with part numbers 1N5518 thru 1N554 6 on
separate data sheets
Regulates voltage over a broad op erating current
and temperature range
Extensive selection from 3.3 to 33 V
Standard voltage tolerances are plus/minus 5% with
a “B” suffix, e.g. 1N5518BUR-1, etc.
Tight tolerances available in plus or minus 2% or 1%
with C or D suffix respectively , e.g. 1N5518CUR-1,
1N5518DUR-1, etc.
Hermetically sealed surface mount package
Nonsensitive to ESD per MIL-STD-750 Method 1020
Minimal capacitance (see Figure 3)
Inherently radiation hard as described in Microsemi
MicroNote 050
MAXIMUM RAT ING S
MECHANICAL AND PACKAGING
Operating and Storage temperature: -65ºC to
+175ºC
Thermal Resistance: 100 ºC/W junction to e nd cap,
or 250ºC/W junction to ambient when mounted on
FR4 PC board (1 oz Cu) with recommended
footprint (see last page)
Steady-State Power: 0.5 watts at end cap
temperature TEC < 125oC or at ambient TA < 50ºC
when mounted on FR4 PC board as described for
thermal resistance above (see Figure 2 for
derating)
Forward voltage @200 mA: 1.1 volts
Solder Temperatures: 260 ºC for 10 s (max)
CASE: Hermetically sealed glass DO-213AA
(SOD80 or MLL34) MELF style package
TERMINALS: End caps tin-lead plated solde r able
per MIL-STD-750, method 2026
POLARITY: Cathode indicated by band where
diode is to be operated with the banded end positive
with respect to the opposite end for Zener regulation
MARKING: cathode band only
TAPE & REEL option: Standard per EIA-481-1-A
with 12 mm tape, 2000 per 7 inch reel or 5000 per
13 inch reel (add “TR” suffix to part number)
WEIGHT: 0.04 grams
See package dimensions on l ast page
1N5518BUR – 1N5546BUR
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Low Voltage Surface Mount
500 mW Avalanche Diodes
Microsemi
Scottsdale Division Page 2
Copyright © 2003
10-31-2003 REV B
WWW.Microsemi .COM
SCOTTSDALE DIVISION
IN5518BUR-1 thru 1N5546BUR-1
(o
r MLL
55
1
8
B-1
t
hr
u
MLL
55
4
6
B-1
)
ELECTRICAL CHARACTERISTICS (TA = 25oC unless otherwise noted. Based on DC measurements at
thermal equilibrium; VF = 1.1 Max @ IF = 200 mA for all types.)
MAX. REVERSE CURRENT
(Note 4)
VR – VOLTS
JEDEC TYPE
NUMBER
(Note 1 and
Note 7)
NOMINAL
ZENER
VOLTAGE
VZ @ IZT
(Note 2)
VOLTS
TEST
CURRENT
IZT
mAdc
MAX. ZENER
IMPEDANCE
B-C-D SUFFIX
ZZT @ IZT
(Note 3)
OHMS
IR
μAdc
NON & A-
SUFFIX B-C-D
SUFFIX
B-C-D
SUFFIX
MAXIMUM
DC ZENER
CURRENT
IZM
(Note 5)
mAdc
B-C-D SUFFIX
MAX. NOISE
DENSITY
AT IZ = 250μA
ND
μV/ Hz
REGULATION
FACTOR
ΔVZ
(Note 6)
VOLTS
LOW VZ
CURRENT
IZL
(Note 6)
mAdc
1N5518BUR-1
1N5519BUR-1
1N5520BUR-1
1N5521BUR-1
1N5522BUR-1
3.3
3.6
3.9
4.3
4.7
20
20
20
20
10
26
24
22
18
22
5.0
3.0
1.0
3.0
2.0
0.90
0.90
0.90
1.0
1.5
1.0
1.0
1.0
1.5
2.0
115
105
98
88
81
0.5
0.5
0.5
0.5
0.5
0.90
0.90
0.85
0.75
0.60
2.0
2.0
2.0
2.0
1.0
1N5523BUR-1
1N5524BUR-1
1N5525BUR-1
1N5526BUR-1
1N5527BUR-1
5.1
5.6
6.2
6.8
7.5
5.0
3.0
1.0
1.0
1.0
26
30
30
30
35
2.0
2.0
1.0
1.0
0.5
2.0
3.0
4.5
5.5
6.0
2.5
3.5
5.0
6.2
6.8
75
68
61
56
51
0.5
1.0
1.0
1.0
2.0
0.65
0.30
0.20
0.10
0.05
0.25
0.25
0.01
0.01
0.01
1N5528BUR-1
1N5529BUR-1
1N5530BUR-1
1N5531BUR-1
1N5532BUR-1
8.2
9.1
10.0
11.0
12.0
1.0
1.0
1.0
1.0
1.0
40
45
60
80
90
0.5
0.1
0.05
0.05
0.05
6.5
7.0
8.0
9.0
9.5
7.5
8.2
9.1
9.9
10.8
46
42
38
35
32
4.0
4.0
4.0
5.0
10
0.05
0.05
0.10
0.20
0.20
0.01
0.01
0.01
0.01
0.01
1N5533BUR-1
1N5534BUR-1
1N5535BUR-1
1N5536BUR-1
1N5537BUR-1
13.0
14.0
15.0
16.0
17.0
1.0
1.0
1.0
1.0
1.0
90
100
100
100
100
0.01
0.01
0.01
0.01
0.01
10.5
11.5
12.5
13.0
14.0
11.7
12.6
13.5
14.4
15.3
29
27
25
24
22
15
20
20
20
20
0.20
0.20
0.20
0.20
0.20
0.01
0.01
0.01
0.01
0.01
1N5538BUR-1
1N5539BUR-1
1N5540BUR-1
1N5541BUR-1
1N5542BUR-1
18.0
19.0
20.0
22.0
24.0
1.0
1.0
1.0
1.0
1.0
100
100
100
100
100
0.01
0.01
0.01
0.01
0.01
15.0
16.0
17.0
18.0
20.0
16.2
17.1
18.0
19.8
21.6
21
20
19
17
16
20
20
20
20
20
0.20
0.20
0.20
0.25
0.30
0.01
0.01
0.01
0.01
0.01
1N5543BUR-1
1N5544BUR-1
1N5545BUR-1
1N5546BUR-1
25.0
28.0
30.0
33.0
1.0
1.0
1.0
1.0
100
100
100
100
0.01
0.01
0.01
0.01
21.0
23.0
24.0
28.0
22.4
25.2
27.0
29.7
15
14
13
12
20
20
20
20
0.35
0.40
0.45
0.50
0.01
0.01
0.01
0.01
NOTES:
1. TOLERANCE AND VOLTAGE DESIGNATION –
The JEDEC type numbers without a letter prior to the UR-1 suffix are +/-20% with guaranteed limits for only VZ, IR, and VF.
Units with “A” prior to the UR-1 suffix are +/-10% with guaranteed limits for VZ, IR, and VF. Units with guaranteed limits for all six
parameters are indicated by a B suffix for +/-5.0% units, C suffix for +/-2.0% and D suffix for +/-1.0% prior to the UR-1 suffix.
2. ZENER VOLTAGE (VZ) MEASUREMENT –
Nominal zener voltage is measured with the device junction in thermal equilibrium with ambient tem perature of 25oC.
3. ZENER IMPEDANCE (ZZ) MEASUREMENT –
The zener impedance is derived from the 60 Hz ac voltage, which results when an ac current having an rms value equal to 10%
of the dc zener current (IZT) is superimposed on IZT.
4. REVERSE CURRENT (IR) –
1N5518BUR – 1N5546BUR
Reverse currents are guaranteed and are measured at VR as shown on the table.
5. MAXIMUM REGULATOR CURRENT (IZM) –
The maximum current shown is as shown in MIL-PRF-19500/437.
6. MAXIMUM REGULATION FACTOR (ΔVZ) –
ΔVZ is the maximum difference between VZ at IZT and VZ at IZL measured with the device junction in thermal equilibrium.
7. PART NUMBER – These may be ordered as either 1N5518BUR-1 thru 1N5546BUR-1 or as MLL5518B-1 thru MLL5546B-1 part
numbers. For military types, use the 1NxxxUR-1 format and also include JAN, JANTX, or JANTXV prefix for desired screening
level, e.g. JANTX1N5518BUR-1, JANTXV1N5532BUR-1, JANTXV1N5534CUR-1, JANTXV1N5545DUR-1, etc.
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Low Voltage Surface Mount
500 mW Avalanche Diodes
Microsemi
Scottsdale Division Page 3
Copyright © 2003
10-31-2003 REV B
WWW.Microsemi .COM
SCOTTSDALE DIVISION
IN5518BUR-1 thru 1N5546BUR-1
(o
r MLL
55
1
8
B-1
t
hr
u
MLL
55
4
6
B-1
)
GRAPHS and CIRCUIT
Noise density, (ND) is specified in
microvolt-rms per square-root-hertz.
A
ctual measurement is performed
using a 1 kHz to 3 kHz frequency
bandpass filter at a constant Zener test
current (IZT) at 25oC ambient
temperature.
Pd Rated Power Dissipation (mW)
1N5518BUR – 1N5546BUR
FIGURE 1 Noise Density
Measurement Circuit
TEC
T
A
TEC, End Cap Temperature (oC) or TA
Ambient temperature on FR4 PC board
FIGURE 2 Power Derating Curve
Typical Capacitance in Picofarads (pf)
Zener Voltage VZ FIGURE 4
FIGURE 3 Capacitance vs. Zener Voltage (Typical) Zener Diode Characteristics and Symbol Identification
PACKAGE DIMEN SIONS
INCHES MILLIMETERS
DIM MIN MAX MIN MAX
A 0.063 0.067 1.60 1.70
B 0.130 0.146 3.30 3.70
C 0.016 0.022 0.41 0.55 PAD LAYOUT
INCHES mm
A .200 5.08
B .055 1.40
C .080 2.03
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503