622 Mbps PIN-TIA Receiver Modules-ROSA (3.3 V)
T-11-622-D3-SSC • T-11-622-D3-SLC
Features
• InGaAs/ InP PIN Photodiode with transimpedance amplifier
• High sensitivity with Auto Gain Control (AGC)
• Differential ended output
• Single +3.3 V operation
• -40 to +85ºC operating temperature
Packaging
• SC/ LC ROSA package
Application
• 622 Mbps SONET/SDH receivers
• 622 Mbps ATM receiver
AC Optical and Electrical Characteristics (Tc = 25˚C)
Parameter
Detection Range
Gain @ 10 MBps
Differential
Bandwidth
(to –3dB point)
Saturation Power
Sensitivity
Output Resistance
Symbol
G
BW
Psat
Sens
Rout
Min.
1100
-
440
-3
-
-
Typ
1310
21
520
0
-32
50
Max
1650
-
600
-
-29
-
Unit
nm
V/mW
MHz
dBm
dBm
ohm
Test Condition
-
λ = 1310 nm
-
λ = 1310 nm
BER = 10-10 @ 622 Mbps
-
Connector Options
Package
ROSA
ROSA
Fiber
-
-
Connector
SC
LC
Model
T-11-622-D3-SSC
T-11-622-D3-SLC
DC Electrical Characteristics (Tc = 25˚C)
Symbol
Vcc
Vd
Icc
Min
3.0
-0.1
20
Unit
V
V
mA
Parameter
Power Supply
Differential Output Voltage
Supply Current (RL=50Ω)
Typ
5.0
-
-
Max
5.5
1
45
Absolute Maximum Ratings (Tc = 25˚C)
Symbol
Vcc
Topr
Tstg
Value
5
-40 to +85
-40 to +85
Unit
V
˚C
˚C
Parameter
Supply Voltage
Operating Temperature
Storage Temperature
Operating at Vcc = 3.3 V, Tc = 25 ºC, λ = 1310 nm, 9/125 µm SM fiber
622 Mbps PIN-TIA Receiver Modules-ROSA (3.3 V)
T-11-622-D3-SSC • T-11-622-D3-SLC
LUMNDS065-0402
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 • LUMINENTINC.COM
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines
according to proper ESD procedures.
IMPORTANT NOTICE!
All information contained in this document is subject to change without notice, at Luminent’s sole and absolute discretion. Luminent warrants performance of its products to
current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated as “preliminary” are given to describe components
only, and Luminent expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a
particular purpose, and non-infringement of proprietary rights. Please refer to the company’s Terms and Conditions of Sale for further warranty information.
Luminent assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described
herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and Luminent makes no representations or warranties
that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in
implantation or other life support applications where malfunction may result in injury or death to persons. Luminent customers using or selling products for use in such
applications do so at their own risk and agree to fully defend and indemnify Luminent for any damages resulting from such use or sale.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that Luminent is not liable for any actual,
consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact Luminent to
obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current.
© Luminent, Inc. 2002
All rights reserved
Warnings
Legal Notice
Pin Assignments
Outline Drawing
Model
T-11-622-D3-SSC
T-11-622-D3-SLC
PIN Assignment
Functional Schematic
GND
D
OUT
D
OUT
VCC (+3.3V)
PD
Pin assignment
1~Vcc
2~Dout
3~Dout
4~GND (case)
*Units in mm
Note: Pin assignment can be customized.
1
