UNISONIC TECHNOLOGIES CO., LTD U74AHC374 CMOS IC OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS WITH 3-STATE OUTPUTS DESCRIPTION The U74AHC374 is a octal edge-triggered D-type flip-flops with 3-state outputs and it has 8 channels. When the OE input is low, on the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels of the data (D) inputs. When the OE input is high, the outputs are in the high-impedance. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pull-up resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. TSSOP-20 FEATURES * Operate from 2V to 5.5V * Max tPD of 12.7ns at VCC=3.3V, CL=15pF * Max ICC of 4uA * Typ VOL< 0.36V at VCC=4.5V,IO=8mA,TA=25C * Typ VOH> 3.94V at VCC=4.5V,IO=-8mA, TA=25C ORDERING INFORMATION Ordering Number Lead Free Halogen Free U74HC374L-P20-R U74HC374G-P20-R U74HC374L-P20-T U74HC374G-P20-T www.unisonic.com.tw Copyright (c) 2011 Unisonic Technologies Co., Ltd Package Packing TSSOP-20 TSSOP-20 Tape Reel Tube 1 of 6 QW-R502-656.A U74AHC374 CMOS IC PIN CONFIGURATION FUNCTION TABLE INPUTS( OE ) INPUTS(CLK) INPUTS(D) OUTPUT(Q) L L L H H or L X H L X X H L Q0 Z LOGIC SYMBOL OE 1 CLK 11 1D 3 2D 3D 4D 4 EN C1 1D 7 8 5D 13 6D 14 7D 17 8D 18 2 1Q 5 2Q 6 3Q 9 4Q 12 5Q 15 6Q 16 7Q 19 8Q LOGIC DIAGRAM UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 6 QW-R502-656.A U74AHC374 CMOS IC ABSOLUTE MAXIMUM RATING PARAMETER SYMBOL RATINGS UNIT Supply Voltage VCC -0.5 ~ 7 V Input Voltage VIN -0.5 ~ 7 V Output Voltage VOUT -0.5 ~ VCC +0.5 V VCC or GND Current ICC 75 mA Output Current IOUT 25 mA Input Clamp Current IIK -20 mA Output Clamp Current IOK 20 mA Operating Temperature TOPR -40 ~ + 85 Storage Temperature TSTG -65 ~ + 150 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage SYMBOL VCC High-level Input Voltage VIH Low-level Input Voltage VIL Input Voltage Output Voltage VIN VOUT High-level Output Current IOH Low-level Output Current IOL Input Rise or Fall Times tR, tF TEST CONDITIONS VCC=2V VCC=3V VCC=5.5V VCC=2V VCC=3V VCC=5.5V High or low state VCC = 2 V VCC = 3.3 V 0.3 V VCC = 5 V 0.5 V VCC = 2 V VCC = 3.3 V 0.3 V VCC = 5 V 0.5 V VCC = 3.3 V 0.3 V VCC = 5 V 0.5 V MIN 2 1.5 2.1 3.85 TYP MAX 5.5 UNIT V V 0.5 0.9 1.65 VCC VCC -50 -4 -8 50 4 8 100 20 0 0 V V V A mA A mA ns ELECTRICAL CHARACTERISTICS (TA=25) PARAMETER Output Voltage High-Level SYMBOL VOH Output Voltage Low-Level VOL Input Leakage Current 3-state Leakage Current Quiescent Supply Current Input Capacitance Output Capacitance II(LEAK) IOZ ICC CI CO TEST CONDITIONS VCC=2V, IOH=-50A VCC=3V, IOH=-50A VCC=4.5V, IOH=-50A VCC=3V, IOH=-4mA VCC=4.5V, IOH=-8mA VCC=2V, IOH=50A VCC=3V, IOH=50A VCC=4.5V, IOH=50A VCC=3V, IOH=4mA VCC=4.5V, IOH=8mA VCC= 0 to 5.5V, VIN=5.5V or GND VCC=5.5V, VOUT= VCC or GND VCC=5.5V, VIN=VCC or GND, IOUT=0 VCC=5V, VIN=VCC or GND VCC=5V, VOUT=VCC or GND UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 1.9 2.9 4.4 2.58 3.94 TYP 2 3 4.5 4 6 MAX UNIT V 0.1 0.1 0.1 0.36 0.36 0.1 0.25 4 10 V A A A pF pF 3 of 6 QW-R502-656.A U74AHC374 CMOS IC SWITCHING CHARACTERISTICS (See TEST CIRCUIT AND WAVEFORMS) PARAMETER SYMBOL From CLK to Q tPLH/tPHL From OE to Q tPZL/tPZH From OE to Q tPLZ/tPHZ Maximum Clock Frequency fMAX Pulse Width tW Setup Time tSU Hold Time tH TEST CONDITIONS CL =15pF VCC = 3.3V 0.3V CL =50pF CL =15pF VCC = 5V 0.5V CL =50pF CL =15pF VCC = 3.3V 0.3V CL =50pF CL =15pF VCC = 5V 0.5V CL =50pF CL =15pF VCC = 3.3V 0.3V CL =50pF CL =15pF VCC = 5V 0.5V CL =50pF CL =15pF VCC = 3.3V 0.3V CL =50pF CL =15pF VCC = 5V 0.5V CL =50pF VCC = 3.3 V 0.3 V VCC = 5 V 0.5 V VCC = 3.3 V 0.3 V VCC = 5 V 0.5 V VCC = 3.3 V 0.3 V VCC = 5 V 0.5 V MIN 80 55 130 85 5 5 4.5 3 2 2 TYP 8.1 10.6 5.4 6.9 7.1 9.6 5.1 6.6 7.5 10.2 4.6 6.1 130 85 185 120 MAX 12.7 16.2 8.1 10.1 11 14.5 7.6 9.6 10.5 14 6.8 8.8 UNIT ns ns ns MHz ns ns ns OPERATING CHARACTERISTICS(TA=25) PARAMETER Power Dissipation Capacitance SYMBOL TEST CONDITIONS CPD No load, VCC = 5 V, f=1MHz UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw RATINGS 32 UNIT pF 4 of 6 QW-R502-656.A U74AHC374 CMOS IC TEST CIRCUIT AND WAVEFORMS VCC TEST tPLH/tPHL tPLZ/tPZL tPHZ/tPZH S1 Open VLOAD GND VM VLOAD Input VIN tR, tF 3.3V0.3V VCC 3ns VCC/2 VCC 5V0.5V VCC 3ns VCC/2 VCC RL V 1k 0.3V 1k 0.5V CL 15pF 50pF 15pF 50pF tW VIN Input VM VM 0 V Pulse Duration Timing Input VM tSU tH VIN Data Input VM VM 0V Setup and Hold Times UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 6 QW-R502-656.A U74AHC374 CMOS IC TEST CIRCUIT AND WAVEFORMS(Cont.) VIN Input VM VM tPLH tPHL 0V VOH Output VM VM VOL tPLH tPHL VOH VM Output VM VOL Voltage Waveforms Propagation Delay Times Note: A. CL includes probe and jig capacitance. Note: B. PRR 1MHz, ZO = 50, tR 3ns, tF 3ns. UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 QW-R502-656.A