Product Brief
eUniStone PBA31308/2 SPP-AT
BlueMoon® Universal Family
Extended to Embedded Data Transfer Applications
THE COMPLETE SPP SYSTEM MODULE, eUniStone is a fully integrated
Bluetooth® device including stack and Serial Port Profile for data transfer
applications. With an easy command interface on top enabling an easy in-design
and minimal Host requirements.
The ready to use Bluetooth System Module offers a qualified solution for
accelerated time-to-market. The high level of integration results into a competitive
module footprint providing an optimized pad layout for easy design-in. The
eUniStone has been designed with the focus on low cost, long range and easy
design-in.
The high performing eUniStone offers outstanding range and efficient utilization
of low power modes. It is compliant to BT 2.0 plus enhanced data rate and is
equipped with a powerful ARM7 processor.
The low-cost system requires no external components exept the antenna. The
small module offers a small solution footprint. Reference design and design kit
are available for quick and easy design-in.
The optimized system partitioning with patching capabilities of ROM code
together with applications and complimentary profiles loaded from external
memory provides a highly flexible and upgradeable solution.
The complete eUniStone SYSTEM SW includes the Serial Port Profile (SPP) with
an extended AT command-set, supporting both Device A and Device B role
configuration. HID profile and other applications can be offered as Customized
Software on request.
Applications
Consumer, Automotive & Industrial Applications
Data transfer & synchronization
Remote control
Sensors
Main Features
Complete Bluetooth system device
Pre qualified Bluetooth product v2.0 + EDR
Enhanced data rate –
Adaptive frequency hopping –
Fast connection setup –
On-module Bluetooth reference crystal –
On-module E –2PROM for Bluetooth device data and SW
SPP profile implementation
SPP Device A and B support
SW application upgrade over UART
GPIO Support for up to 8 GPIO
Bluetooth Power Class 2
High RF sensitivity
(-86dBm @ 0.01% BER)
RoHS compliant
Key Benefits
Complete system solution including
BT stack with SPP, GAP, SDAP profile
and AT command set
One-Stop-Shop at Infineon
Module directly from IC and –
software manufacturer
Optimized value-chain –
(lead time, cost, responsibility)
No external components needed
except antenna
Pre-qualified for Bluetooth, FCC and
R&TTE
Patching capability offering large
flexibility on
Enhancement of existing –
functionalities
Bug fixing
High performance processor system
enabling minimal requirements of
external host solution
Specific Production mode
Relaxed pad pitch - 1.2mm - easy
design
Infineon provides roadmap from
module to chip-on-PCB
Support for crystal or external clock
Specific Production mode
www.infineon.com/wireless
Main Features
Product Brief
How to reach us:
http://www.infineon.com
Published by
Infineon Technologies AG
81726 Munich, Germany
© 2009 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer The information given in this Product Brief
shall in no event be regarded as a guarantee of conditions
or characteristics. With respect to any examples or hints
given herein, any typical values stated herein and/or any
information regarding the application of the device, Infineon
Technologies hereby disclaims any and all warranties and
liabilities of any kind, including without limitation, warranties
of non-infringement of intellectual property rights of any
third party.
Information For further information on technology, delivery
terms and conditions and prices, please contact the nearest
Infineon Technologies Office (www.infineon.com).
Warnings Due to technical requirements, components may
contain dangerous substances. For information on the types
in question, please contact the nearest Infineon Technologies
Office. Infineon Technologies components may be used
in life-support devices or systems only with the express
written approval of Infineon Technologies, if a failure of such
components can reasonably be expected to cause the failure
of that life-support device or system or to affect the safety or
effectiveness of that device or system. Life support devices
or systems are intended to be implanted in the human body
or to support and/or maintain and sustain and/or protect
human life. If they fail, it is reasonable to assume that the
health of the user or other persons may be endangered.
Published by Infineon Technologies AG
Block Diagram
Filter
Balun
Voltage
Regulator
Base
Band
Stack
AT-API
Radio
HID
SDAP
GAP
RFCOMMGPIO
UART
SPP
BlueMoon Universal Embedded
26MHz X-talE2PROM
Product Summary
Type Description Temperatur Range Package
eUniStone PBA31308/2 V1.01 -40C to -70C Module 8.7 x 11.6mm
54 pads at 1.20mm pitch
PBA31308/2 V1.11 -40C to +85C
eUniStone PBA31308/2 SPP-AT
BlueMoon
®
Universal Family Extended to Embedded Data Transfer Applications
BlueMoon Universal Embedded
0.13µm CMOS technology
Bluetooth 2.0 + EDR
Integrated Stack
Integrated RFCOMM profile
AT command interface available
On-module E2PROM
On-module 26MHz crystal
On-module balun/filter
On-module voltage regulator
50Ω Antenna interface
Interfaces
High speed UART – 3.25Mbps
GPIOs with wake-up capability
Single voltage power supply
Support direct connect to 2xAA
50Ω balanced Antenna interface
26MHz crystal or 26MHz reference frequency
Optional 32kHz Low Power clock
Development Kit
The Development Kit is a complete platform for
development and evaluation.
SW for standard applications
AT command Interface tool
HCI command Interface tool
2 HW boards
UART interface
USB to UART converter
Reference design
Documentation
Order Number: B153-H9354-X-X-7600
NB08-1341
The Bluetooth word mark is owned by the Bluetooth SIG, Inc. and
any use of this mark by Infineon Technologies is under license.
The BlueMoon trade mark is owned by Infineon Technologies AG.
