914.5 MHz SAW Filter 16 MHz Bandwidth Part Number: SF0915BA02620S DESCRIPTION * * * 914.5 MHz SAW filter with a 16 MHz typical 3dB bandwidth. 3.8 mm Square LCC Package. RoHS compliant. TYPICAL PERFORMANCE IDT * SAW Products * 324 Clark Street, Worcester, MA 01606, USA * Ph 1-508-852-5400 * Fax 1-508-852-8456 www.idt.com DSSF0915BA02620S Rev - 20-April-2009 ECN 36378 Page 1 of 3 914.5 MHz SAW Filter 16 MHz Bandwidth Part Number: SF0915BA02620S SPECIFICATION Parameter 1 Min Typ Max Units MHz dB dB p-p Center Frequency (Fc) Maximum Insertion Loss (910.5 to 918.5 MHz) Amplitude Ripple (910.5 to 918.5 MHz) Attenuation (Reference level from maximum insertion loss) 10 to 830 MHz - 914.5 2.8 0.5 4 2.0 45 52 - dB 830 to 893.5 MHz 893.5 to 895.5 MHz 959 to 980 MHz 980 to 1200 MHz Source Impedance Load Impedance 36 27 32 42 - 45 40 45 47 50 50 - dB dB dB dB ohms ohms - 25 - C Ambient Temperature MAXIMUM RATINGS Parameter Storage Temperature Range Operating Temperature Input Power Level DC Voltage Min Max -40 -20 - 85 65 10 5 Units C C dBm V MATCHING CIRCUIT Notes: 1. Filter to operate in a single ended system 2. External matching components are not required. IDT * SAW Products * 324 Clark Street, Worcester, MA 01606, USA * Ph 1-508-852-5400 * Fax 1-508-852-8456 www.idt.com DSSF0915BA02620S Rev - 20-April-2009 ECN 36378 Page 2 of 3 914.5 MHz SAW Filter 16 MHz Bandwidth Part Number: SF0915BA02620S PACKAGE OUTLINE Units: mm Pin Configuration: Package Material: Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 1 m min, over a 1.3-8.9 m Ni plating Input: Output: Ground: MARKING 2 6 1, 3, 4, 6, 7, 8 SUGGESTED FOOTPRINT ISO 9001 Registered All specifications are believed to be accurate and reliable. However, MNC reserves the right to make changes without notice. (c) 2007 All rights reserved. IDT * SAW Products * 324 Clark Street, Worcester, MA 01606, USA * Ph 1-508-852-5400 * Fax 1-508-852-8456 www.idt.com DSSF0915BA02620S Rev - 20-April-2009 ECN 36378 Page 3 of 3