Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers befor e ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
s
ecifications or transact the a
roval sheet for
roduct s
ecifications before orderin
.
2006.10.2
MPDTH05030WA* Specification
11
15. 3 Storage
15. 3. 1 This product should be treated as MSL2 product when it is reflowed according to
recommended soldering conditions described in section 15.1.3. .
This product can be stored for up to 1 year at below 30 oC 60%R.H., without requiring an additional
baking process.
If stored for over 1 year, baking of this device before soldering is recommended.
The recommended baking condition of individual devices is 125±5 oC /24hour.
If devices are baked in the manufacturer’s tray or in manufacturer’s tape, 60±5 oC /168hour is
recommended.
Please avoid dampness and heat or locations where temperatures may vary widely to avoid possible
water condensation on the device. Expo sure to such environments may degrade the performance and/
or the reliability of the device.
If the device must be stored for a longer time than 1 year it is recommend that solderability be tested
regularly to confirm material degradation has not occurred.
15. 3. 2 Murata recommends that this device not be stored under conditions such as:
a location where surfaces have an accumulation of dust, direct e x posure to ocean air, or in
an atmosphere cont aining a corrosive gas (e.g., Cl2, NH3, SO2, NOX, etc.).
15. 4 Operational Environment and Operational Conditions
15. 4. 1 Operational Environment
This device is not water-, chemical- or corrosion-proof.
In order to prevent leakage of electricity and abnormal temperature rise of the device,
do not operate under the following environmental conditions:
(1) An atmosphere containing corrosive gas (Cl2, NH3, SO2, NOX, and so on)
(2) A high-dust environment
(3) Under the exposure of direct sunlight
(4) A location where the likelihood of exposure to water or water condensation exists.
(5) A location exposed to ocean air
(6) Any locations similar to the above
15. 4. 2 Operational Conditions
Please use this product within specifie d values (power supply, temperatu re, input, output and load
condition, and so on). If the device is exposed to conditions outside of the specified values reliability of
the device may be adversely af fected.
15. 4. 3 Note prior to use
Exposure of this device to a high-level st atic charge, over-rated voltage, or reverse voltage may result in
diminished reliability and/ or failure. Murata recommends that the following conditions be avoided prior to
use of this device:
(1) Supply of power outside of rated value (see section 8), Supply of reverse power or inadequate
connection of a 0V (DC) line
(2) Electrostatic discharge from production line and/or operator
(3) Electrification of the device from electrostatic induction In addition Murata recommends that
excessive mechanical shock be avoided.
15. 5 Transportation
Murata recommends that when transporting this product, it be packed so as to avoid damage by mech anical
vibration or exposure to adverse conditions such as ocean air, high humidity. It is additionally recommended
that appropriate instructions and guidelines be communicated to carriers to prevent exposure to these same
conditions.
16. ! Note
1. Murata re commends that customers ensure that the evaluation and testing of these devices are completed with
this product actually assembled on their prod uct.
2. All the items and parameters in this product specification have been prescribed on the premise that Murata’s
product is used for the purpose, unde r the condition and in the environment mutually agreed upon.
This document is subject to rev i sion without prior or subsequent notice.
Please contact Murata for latest documentation.