©2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/18/13
Transient Voltage Suppression Diodes
48
TVS Diode Arrays (SPA
™ Family of Products)
Surface Mount – 3000W > SMDJ-HRA series
SMDJ-HRA Series
AGENCY AGENCY FILE NUMBER
E230531
The SMDJ-HRA High Reliability series is designed
specifically to protect sensitive electronic equipment from
voltage transients induced by lightning and other transient
voltage events. These are available with a variety of up-
screening options for enhanced reliability.
Description
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Agency Approvals
Parameter Symbol Value Unit
Peak Pulse Power Dissipation at
TA=25ºC by 10/1000µs waveform
(Fig.1)(Note 1), (Note 2)
PPPM 3000 W
Power Dissipation on infinite heat
sink at TA=50OCPM(AV) 6.5 W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3) IFSM 300 A
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
only
VF3.5 V
Operating Junction and Storage
Temperature Range TJ, TSTG -55 to 150 °C
Typical Thermal Resistance Junction
to Lead RuJL 15 °C/W
Typical Thermal Resistance Junction
to Ambient RuJA 75 °C/W
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only, duty cycle=4 per minute maximum.
Applications
Features
• Highreliabilitydevices
with fabrication and
assembly lots traceability
• Enhancedreliability
screening options are
available in reference to
MIL-PRF-19500. Refer to
screen process table for
more detail on screening
options
• Forsurfacemounted
applications in order to
optimize board space
• Lowprolepackage
• Built-instrainrelief
• VBR @TJ= VBR@25°C x (1+αT
x (TJ - 25))
(αT:Temperature Coefficient)
• Glasspassivatedchip
junction
• 3000Wpeakpulsepower
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
• Fastresponsetime:
typically less than 1.0ps
from0VtoBVmin
• Excellentclamping
capability
• Lowincrementalsurge
resistance
• TypicalIR less than 2µA
above 12V
• HighTemperature
soldering guaranteed:
260°C/40 seconds at
terminals
• Plasticpackagehas
Underwriters laboratory
flammability 94V-O
•MeetMSLlevel1,per
J-STD-020, LF maximun
peak of 260°C
• Mattetinlead–freeplated
•HalogenfreeandRoHS
compliant
1
RoHS
SMDJ-HRA Series
Functional Diagram
Bi-directional
Uni-directional
Cathode Anode
Uni-directional
Bi-directional
SMDJ-HRA devices are ideal for the high reliability
protection of I/O Interfaces, VCC bus and other vulnerable
circuits used in Telecom, Computer, Industrial and
Consumer electronic applications.
©2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/18/13
Transient Voltage Suppression Diodes
49
TVS Diode Arrays (SPA
™ Family of Products)
Surface Mount – 3000W > SMDJ-HRA series
SMDJ-HRA Series
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
Marking
Reverse
Stand off
Voltage
VR
(Volts)
Breakdown
Voltage VBR
(Volts) @ IT
Test
Current
IT
(mA)
Maximum
Clamping
Voltage VC
@ Ipp
(V)
Maximum
Peak
Pulse
Current Ipp
(A)
Maximum
Reverse
Leakage IR
@ VR
(µA)
Agency
Approval
UNI BI MIN MAX
SMDJ5.0A-HRA SMDJ5.0CA-HRA RDEH DDEH 5.0 6.40 7. 0 0 10 9.2 326.1 800 X
SMDJ6.0A-HRA SMDJ6.0CA-HRA RDGH DDGH 6.0 6.67 7.37 10 10.3 291.3 800 X
SMDJ6.5A-HRA SMDJ6.5CA-HRA RDKH DDKH 6.5 7.22 7.98 10 11. 2 267.9 500 X
SMDJ7.0A-HRA SMDJ7.0CA-HRA PDMH DDMH 7. 0 7.78 8.60 10 12.0 250.0 200 X
SMDJ7.5A-HRA SMDJ7.5CA-HRA PDPH DDPH 7. 5 8.33 9.21 1 12.9 232.6 100 X
SMDJ8.0A-HRA SMDJ8.0CA-HRA PDRH DDRH 8.0 8.89 9.83 1 13.6 220.6 50 X
SMDJ8.5A-HRA SMDJ8.5CA-HRA PDTH DDTH 8.5 9.44 10.40 1 14.4 208.3 20 X
SMDJ9.0A-HRA SMDJ9.0CA-HRA PDVH DDVH 9.0 10.00 11. 10 1 15.4 194.8 10 X
SMDJ10A-HRA SMDJ10CA-HRA PDXH DDXH 10.0 11. 10 12.30 1 1 7. 0 176.5 5 X
SMDJ11A-HRA SMDJ11CA-HRA PDZH DDZH 11. 0 12.20 13.50 1 18.2 164.8 2 X
SMDJ12A-HRA SMDJ12CA-HRA PEEH DEEH 12.0 13.30 14.70 1 19.9 150.8 2 X
SMDJ13A-HRA SMDJ13CA-HRA PEGH DEGH 13.0 14.40 15.90 1 21.5 139.5 2 X
SMDJ14A-HRA SMDJ14CA-HRA PEKH DEKH 14.0 15.60 17.20 1 23.2 129.3 2 X
SMDJ15A-HRA SMDJ15CA-HRA PEMH DEMH 15.0 16.70 18.50 1 24.4 123.0 2 X
SMDJ16A-HRA SMDJ16CA-HRA PEPH DEPH 16.0 17.80 19.70 1 26.0 115.4 2 X
SMDJ17A-HRA SMDJ17CA-HRA PERH DERH 1 7. 0 18.90 20.90 1 27.6 108.7 2 X
SMDJ18A-HRA SMDJ18CA-HRA PETH DETH 18.0 20.00 22.10 1 29.2 102.7 2 X
SMDJ20A-HRA SMDJ20CA-HRA PEVH DEVH 20.0 22.20 24.50 1 32.4 92.6 2 X
SMDJ22A-HRA SMDJ22CA-HRA PEXH DEXH 22.0 24.40 26.90 1 35.5 84.5 2 X
SMDJ24A-HRA SMDJ24CA-HRA PEZH DEZH 24.0 26.70 29.50 1 38.9 77.1 2 X
SMDJ26A-HRA SMDJ26CA-HRA PFEH DFEH 26.0 28.90 31.90 1 42.1 71.3 2 X
SMDJ28A-HRA SMDJ28CA-HRA PFGH DFGH 28.0 31.10 34.40 1 45.4 66.1 2 X
SMDJ30A-HRA SMDJ30CA-HRA PFKH DFKH 30.0 33.30 36.80 1 48.4 62.0 2 X
SMDJ33A-HRA SMDJ33CA-HRA PFMH DFMH 33.0 36.70 40.60 1 53.3 56.3 2 X
SMDJ36A-HRA SMDJ36CA-HRA PFPH DFPH 36.0 40.00 44.20 1 58.1 51.6 2 X
SMDJ40A-HRA SMDJ40CA-HRA PFRH DFRH 40.0 44.40 49.10 1 64.5 46.5 2 X
SMDJ43A-HRA SMDJ43CA-HRA PFTH DFTH 43.0 47.80 52.80 1 69.4 43.2 2 X
SMDJ45A-HRA SMDJ45CA-HRA PFVH DFVH 45.0 50.00 55.30 1 72.7 41.3 2 X
SMDJ48A-HRA SMDJ48CA-HRA PFXH DFXH 48.0 53.30 58.90 1 77.4 38.8 2 X
SMDJ51A-HRA SMDJ51CA-HRA PFZH DFZH 51.0 56.70 62.70 1 82.4 36.4 2 X
SMDJ54A-HRA SMDJ54CA-HRA RGEH DGEH 54.0 60.00 66.30 1 87.1 34.4 2 X
SMDJ58A-HRA SMDJ58CA-HRA PGGH DGGH 58.0 64.40 71.20 1 93.6 32.1 2 X
SMDJ60A-HRA SMDJ60CA-HRA PGKH DGKH 60.0 66.70 73.70 1 96.8 31.0 2 X
SMDJ64A-HRA SMDJ64CA-HRA PGMH DGMH 64.0 71.10 78.60 1 103.0 29.1 2 X
SMDJ70A-HRA SMDJ70CA-HRA PGPH DGPH 70.0 77.80 86.00 1 113.0 26.5 2 X
SMDJ75A-HRA SMDJ75CA-HRA PGRH DGRH 75.0 83.30 92.10 1 121.0 24.8 2 X
SMDJ78A-HRA SMDJ78CA-HRA PGTH DGTH 78.0 86.70 95.80 1 126.0 23.8 2 X
SMDJ85A-HRA SMDJ85CA-HRA PGVH DGVH 85.0 94.40 104.00 1 137.0 21.9 2 X
SMDJ90A-HRA SMDJ90CA-HRA PGXH DGXH 90.0 100.00 111. 0 0 1 146.0 20.5 2 X
SMDJ100A-HRA SMDJ100CA-HRA PGZH DGZH 100.0 111. 0 0 123.00 1 162.0 18.5 2 X
SMDJ110A-HRA SMDJ110CA-HRA PHEH DHEH 110.0 122.00 135.00 1 177.0 16.9 2 X
SMDJ120A-HRA SMDJ120CA-HRA PHGH DHGH 120.0 133.00 147.00 1 193.0 15.5 2 X
SMDJ130A-HRA SMDJ130CA-HRA PHKH DHKH 130.0 144.00 159.00 1 209.0 14.4 2 X
Note:
1. For bidirectional type having VR of 10 volts and less, the IR limit is double.
2.SMDJ-HRA voltage binning can be specified by customer’s request via contacting Littlefuse service
2
©2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/18/13
Transient Voltage Suppression Diodes
50
Surface Mount – 3000W > SMDJ-HRA series
SMDJ-HRA Series
Voltage Transients
Time
Voltage Across TVS
Current Through TVS
Voltage or Current
Figure 1 - TVS Transients Clamping Waveform
Ratings and Characteristic Curves (TA=25°C unless otherwise noted)
Figure 2 - Peak Pulse Power Rating
0.1
1
10
100
1000
0.001 0.01 0.11
P
PPM
-Peak Pulse Power (KW)
10
0.31x0.31" (8.0x8.0mm)
Copper Pad Area
t
d
-Pulse Width (ms)
PPPM Peak Pulse Power Dissipation -- Max power dissipation
VR Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation
VBR Breakdown Voltage -- Maximum current that flows though the TVS at a specified test current (IT)
VC Clamping Voltage -- Peak voltage measured across the suppressor at a specified Ippm (peak impulse current)
IR Reverse Leakage Current -- Current measured at VR
VF Forward Voltage Drop for Uni-directional
continues on next page.
3
Screen Process
100% Vision Inspection MIL-STD-750 method 2074
100% High Temperature Storage Life (168hrs,150°C) MIL-STD-750 method 1031
100% X-RAY inspection MIL-STD-750 method 2076
100% Temperature Cycle Test (-55 to150°C, 20 cycles, dwell time 15 min) MIL-STD-750 method 1051
100% Reflow (2X) JEDECJ-STD-020
100% Surge Test (2x) MIL-STD-750 method 4066
100% HTRB 150°C Bias=VR(80% breakdown voltage, 96hrs, and each
direction at 96 hrs for Bi-directional products) MIL–STD–750method1038
Final Electrical Test( 100% 3 sigma limit, 100% dynamic test and PAT
limit) MIL-STD-750 method 4016.4021.4011
Vc VBR VR
IR
IT
Ipp
V
Uni-directional
VF
Vc VBR VR
IR
IT
Ipp
V
Vc
VBR
VR
Ipp
IR
IT
Bi-directional
I-V Curve Characteristics
Note: Up-screen program can be specified by customer’s request via contacting Littlefuse service
©2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/18/13
Transient Voltage Suppression Diodes
TVS Diode Arrays (SPA
™ Family of Products)
Surface Mount – 3000W > SMDJ-HRA series
SMDJ-HRA Series
Ratings and Characteristic Curves (TA=25°C unless otherwise noted) (Continued)
IPPM- Peak Pulse Current, % IRSM
0
0
50
100
150
1.0 2.0 3.0 4.0
tr=10µsec
Peak Value
IPPM
IPPM
2
TJ=25°C
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of IPPM
10/1000µsec. Waveform
as defined by R.E.A
td
t-Time (ms)
Half Value
IPPM ( )
1
10
100
1000
10000
100000
1.010.0100.0 1000.0
Cj (pF)
VBR - Reverse Breakdown Voltage (V)
Bi-directional V
= OV
Uni-directional
@ VR
Bi-directional
@ VR
Uni-directional V
= OV
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
6.5
0255075100 125150 175
P
M(AV)
, Steady Sate Power
Dissipation (W)
TA - Ambient Temperature(ºC)
Figure 4 - Pulse Waveform
Figure 5 - Typical Junction Capacitance Figure 6 - Steady State Power Derating Curve
110100
Number of Cycles at 60 Hz
0
50
100
150
200
250
300
350
IFSM - Peak Forward Surge Current
(A)
Figure 7 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional only
0
20
40
60
80
100
0255075100 125 150 175
Peak Pulse Power (P
PP
) or Current
(I
PP
) Derating in Percentage %
T
j
- initial temperature (ºC)
50
Peak Pluse Power
(Single Pluse)
Average Power
Figure 3 - Peak Pulse Power
4
©2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/18/13
Transient Voltage Suppression Diodes
TVS Diode Arrays (SPA
™ Family of Products)
Surface Mount – 3000W > SMDJ-HRA series
SMDJ-HRA Series
Physical Specifications
Weight 0.007 ounce, 0.21 grams
Case JEDECDO214AB.Moldedplasticbody
over glass passivated junction
Polarity Color band denotes positive end
(cathode)exceptBidirectional.
Terminal Matte Tin-plated leads, Solderable per
JESD22-B102D
Dimensions
Dimensions Inches Millimeters
Min Max Min Max
A 0.114 0.126 2.900 3.200
B0.260 0.280 6.600 7. 1 1 0
C 0.220 0.245 5.590 6.220
D 0.079 0.103 2.060 2.620
E0.030 0.060 0.760 1.520
F 0.002 0.008 0.051 0.203
G 0.305 0.320 7.750 8.130
H 0.006 0.012 0.152 0.305
I 0.129 - 3.300 -
J 0.094 - 2.400 -
K - 0.165 4.200
L 0.094 - 2.400 -
Soldering Parameters
Temperature (T)
Time (t)
Ts(min)
Ts(max)
TL
TP
ts
Preheat
tL
tp
Ramp-up Critical Zone
TL to TP
Ramp-down
t 25˚C to Peak
25˚C
Reflow Condition Lead–freeassembly
Pre Heat
- Temperature Min (Ts(min))150°C
- Temperature Max (Ts(max))200°C
- Time (min to max) (ts)60–180secs
Average ramp up rate (Liquidus Temp
(TL) to peak 3°C/second max
TS(max) to TL - Ramp-up Rate 3°C/second max
Reflow - Temperature (TL) (Liquidus) 217°C
- Time (min to max) (ts)60–150seconds
Peak Temperature (TP)260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)20–40seconds
Ramp-down Rate 6°C/second max
Time 25°C to peak Temperature (TP)8 minutes Max.
Do not exceed 280°C
(all dimensions in mm)
I
L
K
J
Solder Pads
5
Environmental Specifications
High Temp. Storage JESD22-A103
HTRB JESD22-A108
Thermal Shock JESD22-A106
MSL JEDEC-J-STD-020C,Level1
H3TRB JESD22-A101
RSH JESD22-B106C
DO-214AB (SMC J-Bend)
B
F
G
H
E
C
D
A
Cathode Band
(for Uni-directional products only)
©2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/18/13
Transient Voltage Suppression Diodes
TVS Diode Arrays (SPA
™ Family of Products)
Surface Mount – 3000W > SMDJ-HRA series
SMDJ-HRA Series
Part Numbering System
Packaging
Part number Component
Package Quantity Packaging
Option
Packaging
Specification
SMDJxxxXX-HRA DO-214AB 3000 Tape&Reel–16mm/13”tape EIASTDRS-481
SMDJxxxXX-HRAT7 DO-214AB 500 Tape&Reel–16mm/7”tape EIASTDRS-481
Part Marking System
VOLTAGE
BI-DIRECTIONAL
5% VOLTAGE TOLERANCE
SERIES
SMDJ -HR XXX CA
HIGH RELIABILITY
A
WITHOUT GROUP B TEST
Tape and Reel Specification
Cathode
6
F
XXXX
YMXXX
Marking Code
Trace Code Marking
Y:Year Code
M: Month Code
XXX: Lot Code
Littelfuse Logo
Cathode Band
0.63
(16.0)
0.315
(8.0)
0.157
(4.0)
0.65
(16.4)
0.80 (20.2)
Arbor Hole Dia.
Optional
7” 7.0 (187)
13” 13.0 (330) Dimensions are in inches
(and millimeters).
Direction of Feed
0.059 DIA
(1.5) Cover tape