Transient Voltage Suppression Diodes Surface Mount - 3000W > SMDJ-HRA series SMDJ-HRA Series RoHS Description Uni-directional TVS Diode Arrays (SPATM Family of Products) The SMDJ-HRA High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. These are available with a variety of upscreening options for enhanced reliability. Bi-directional Agency Approvals AGENCY Features * High reliability devices with fabrication and assembly lots traceability * Enhanced reliability screening options are available in reference to MIL-PRF-19500. Refer to screen process table for more detail on screening options * For surface mounted applications in order to optimize board space * Low profile package * Built-in strain relief * VBR @TJ= VBR@25C x (1+T AGENCY FILE NUMBER E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power Dissipation at TA=25C by 10/1000s waveform (Fig.1)(Note 1), (Note 2) PPPM 3000 W Power Dissipation on infinite heat sink at TA=50OC PM(AV) 6.5 W Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM 300 A Maximum Instantaneous Forward Voltage at 100A for Unidirectional only VF 3.5 V TJ , TSTG -55 to 150 C Typical Thermal Resistance Junction to Lead RuJL 15 C/W Typical Thermal Resistance Junction to Ambient RuJA 75 C/W Operating Junction and Storage Temperature Range x (TJ - 25)) (T:Temperature Coefficient) * Glass passivated chip junction * 3000W peak pulse power capability at 10/1000s waveform, repetition rate (duty cycles):0.01% * Fast response time: typically less than 1.0ps from 0V to BV min * Excellent clamping capability * Low incremental surge resistance * Typical IR less than 2A above 12V * High Temperature soldering guaranteed: 260C/40 seconds at terminals * Plastic package has Underwriters laboratory flammability 94V-O * Meet MSL level1, per J-STD-020, LF maximun peak of 260C * Matte tin lead-free plated * Halogen free and RoHS compliant Notes: 1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2. 2. Mounted on copper pad area of 0.31x0.31" (8.0 x 8.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle=4 per minute maximum. Applications Functional Diagram SMDJ-HRA devices are ideal for the high reliability protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Bi-directional Cathode Anode Uni-directional SMDJ-HRA Series 1 48 (c)2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/18/13 Transient Voltage Suppression Diodes Surface Mount - 3000W > SMDJ-HRA series Electrical Characteristics Maximum Reverse Breakdown TM TVS Diode Arrays Family Test of Products) Stand off (SPA Marking Voltage V Current Clamping Part Number (Uni) Part Number (Bi) SMDJ5.0A-HRA SMDJ6.0A-HRA SMDJ6.5A-HRA SMDJ7.0A-HRA SMDJ7.5A-HRA SMDJ8.0A-HRA SMDJ8.5A-HRA SMDJ9.0A-HRA SMDJ10A-HRA SMDJ11A-HRA SMDJ12A-HRA SMDJ13A-HRA SMDJ14A-HRA SMDJ15A-HRA SMDJ16A-HRA SMDJ17A-HRA SMDJ18A-HRA SMDJ20A-HRA SMDJ22A-HRA SMDJ24A-HRA SMDJ26A-HRA SMDJ28A-HRA SMDJ30A-HRA SMDJ33A-HRA SMDJ36A-HRA SMDJ40A-HRA SMDJ43A-HRA SMDJ45A-HRA SMDJ48A-HRA SMDJ51A-HRA SMDJ54A-HRA SMDJ58A-HRA SMDJ60A-HRA SMDJ64A-HRA SMDJ70A-HRA SMDJ75A-HRA SMDJ78A-HRA SMDJ85A-HRA SMDJ90A-HRA SMDJ100A-HRA SMDJ110A-HRA SMDJ120A-HRA SMDJ130A-HRA SMDJ5.0CA-HRA SMDJ6.0CA-HRA SMDJ6.5CA-HRA SMDJ7.0CA-HRA SMDJ7.5CA-HRA SMDJ8.0CA-HRA SMDJ8.5CA-HRA SMDJ9.0CA-HRA SMDJ10CA-HRA SMDJ11CA-HRA SMDJ12CA-HRA SMDJ13CA-HRA SMDJ14CA-HRA SMDJ15CA-HRA SMDJ16CA-HRA SMDJ17CA-HRA SMDJ18CA-HRA SMDJ20CA-HRA SMDJ22CA-HRA SMDJ24CA-HRA SMDJ26CA-HRA SMDJ28CA-HRA SMDJ30CA-HRA SMDJ33CA-HRA SMDJ36CA-HRA SMDJ40CA-HRA SMDJ43CA-HRA SMDJ45CA-HRA SMDJ48CA-HRA SMDJ51CA-HRA SMDJ54CA-HRA SMDJ58CA-HRA SMDJ60CA-HRA SMDJ64CA-HRA SMDJ70CA-HRA SMDJ75CA-HRA SMDJ78CA-HRA SMDJ85CA-HRA SMDJ90CA-HRA SMDJ100CA-HRA SMDJ110CA-HRA SMDJ120CA-HRA SMDJ130CA-HRA UNI BI Voltage VR (Volts) RDEH RDGH RDKH PDMH PDPH PDRH PDTH PDVH PDXH PDZH PEEH PEGH PEKH PEMH PEPH PERH PETH PEVH PEXH PEZH PFEH PFGH PFKH PFMH PFPH PFRH PFTH PFVH PFXH PFZH RGEH PGGH PGKH PGMH PGPH PGRH PGTH PGVH PGXH PGZH PHEH PHGH PHKH DDEH DDGH DDKH DDMH DDPH DDRH DDTH DDVH DDXH DDZH DEEH DEGH DEKH DEMH DEPH DERH DETH DEVH DEXH DEZH DFEH DFGH DFKH DFMH DFPH DFRH DFTH DFVH DFXH DFZH DGEH DGGH DGKH DGMH DGPH DGRH DGTH DGVH DGXH DGZH DHEH DHGH DHKH 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 85.0 90.0 100.0 110.0 120.0 130.0 BR MAX IT (mA) Voltage VC @ Ipp (V) 7.00 7.37 7.98 8.60 9.21 9.83 10.40 11.10 12.30 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 104.00 111.00 123.00 135.00 147.00 159.00 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 (Volts) @ IT MIN 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 94.40 100.00 111.00 122.00 133.00 144.00 Maximum Maximum Agency Peak Reverse Approval Pulse Leakage IR Current Ipp @ VR (A) (A) 326.1 291.3 267.9 250.0 232.6 220.6 208.3 194.8 176.5 164.8 150.8 139.5 129.3 123.0 115.4 108.7 102.7 92.6 84.5 77.1 71.3 66.1 62.0 56.3 51.6 46.5 43.2 41.3 38.8 36.4 34.4 32.1 31.0 29.1 26.5 24.8 23.8 21.9 20.5 18.5 16.9 15.5 14.4 800 800 500 200 100 50 20 10 5 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Note: 1. For bidirectional type having VR of 10 volts and less, the IR limit is double. 2.SMDJ-HRA voltage binning can be specified by customer's request via contacting Littlefuse service SMDJ-HRA Series 2 49 (c)2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/18/13 Transient Voltage Suppression Diodes Surface Mount - 3000W > SMDJ-HRA series Screen Process 100% Vision Inspection MIL-STD-750 method 2074 100% High Temperature Storage Life (168hrs,150C) MIL-STD-750 method 1031 100% X-RAY inspection MIL-STD-750 method 2076 100% Temperature Cycle Test (-55 to150C, 20 cycles, dwell time 15 min) MIL-STD-750 method 1051 100% Reflow (2X) JEDEC J-STD-020 100% Surge Test (2x) MIL-STD-750 method 4066 100% HTRB 150C Bias=VR(80% breakdown voltage, 96hrs, and each direction at 96 hrs for Bi-directional products) MIL-STD-750 method 1038 Final Electrical Test( 100% 3 sigma limit, 100% dynamic test and PAT limit) MIL-STD-750 method 4016.4021.4011 Note: Up-screen program can be specified by customer's request via contacting Littlefuse service I-V Curve Characteristics Bi-directional Uni-directional Ipp Vc VBR VR V IR VF IT IT IR Vc VBR VR IR IT V Ipp Ipp PPPM VR VBR VC IR VF VR VBR Vc Peak Pulse Power Dissipation -- Max power dissipation Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation Breakdown Voltage -- Maximum current that flows though the TVS at a specified test current (IT) Clamping Voltage -- Peak voltage measured across the suppressor at a specified Ippm (peak impulse current) Reverse Leakage Current -- Current measured at VR Forward Voltage Drop for Uni-directional Ratings and Characteristic Curves (T =25C unless otherwise noted) A Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating Voltage Transients PPPM-Peak Pulse Power (KW) 1000 Voltage or Current Voltage Across TVS Current Through TVS 100 10 1 0.31x0.31" (8.0x8.0mm) 0.1 Copper Pad Area 0.001 Time 0.01 0.1 1 td-Pulse Width (ms) 10 continues on next page. SMDJ-HRA Series 3 50 (c)2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/18/13 Transient Voltage Suppression Diodes Surface Mount - 3000W > SMDJ-HRA series Ratings and Characteristic Curves (T =25C unless otherwise noted) (Continued) A TVS Diode Arrays (SPATMFigure Family of Products) 4 - Pulse Waveform Figure 3 - Peak Pulse Power 150 Peak Pluse Power (Single Pluse) 80 IPPM- Peak Pulse Current, % IRSM Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage % 100 60 50 40 Average Power 20 0 0 25 50 75 100 125 150 tr=10sec Peak Value IPPM 100 175 TJ=25C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Half Value IPPM IPPM ( ) 2 50 0 Tj - initial temperature (C) 10/1000sec. Waveform as defined by R.E.A td 1.0 0 2.0 3.0 4.0 t-Time (ms) Figure 5 - Typical Junction Capacitance Figure 6 - Steady State Power Derating Curve 100000 Cj (pF) 10000 PM(AV), Steady Sate Power Dissipation (W) Bi-directional V= OV Uni-directional V= OV 1000 Uni-directional @ VR 100 Bi-directional @ VR 10 1 1.0 10.0 100.0 1000.0 VBR - Reverse Breakdown Voltage (V) 6.5 6 5.5 5 4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 0 25 50 75 100 125 150 175 TA - Ambient Temperature(C) Figure 7 - Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional only IFSM - Peak Forward Surge Current (A) 350 300 250 200 150 100 50 0 1 10 100 Number of Cycles at 60 Hz SMDJ-HRA Series 4 (c)2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/18/13 Transient Voltage Suppression Diodes Surface Mount - 3000W > SMDJ-HRA series Soldering Parameters TM TVS Diode Arrays Lead-free assembly (SPA Family of Products) Pre Heat - Temperature Min (Ts(min)) 150C - Temperature Max (Ts(max)) 200C - Time (min to max) (ts) 60 - 180 secs Ramp-up TL Average ramp up rate (Liquidus Temp (TL) to peak 3C/second max TS(max) to TL - Ramp-up Rate 3C/second max Reflow - Temperature (TL) (Liquidus) 217C - Time (min to max) (ts) 60 - 150 seconds tL Peak Temperature (TP) 260 20 - 40 seconds Critical Zone TL to TP Ts(max) Ramp-down Ts(min) ts Preheat 25C Time within 5C of actual peak Temperature (tp) +0/-5 tp TP Temperature (T) Reflow Condition t 25C to Peak Time (t) C Ramp-down Rate 6C/second max Time 25C to peak Temperature (TP) 8 minutes Max. Do not exceed 280C Environmental Specifications Physical Specifications High Temp. Storage JESD22-A103 HTRB JESD22-A108 Thermal Shock JESD22-A106 MSL JEDEC-J-STD-020C, Level 1 Weight 0.007 ounce, 0.21 grams Case JEDEC DO214AB. Molded plastic body over glass passivated junction Polarity Color band denotes positive end (cathode) except Bidirectional. H3TRB JESD22-A101 Terminal Matte Tin-plated leads, Solderable per JESD22-B102D RSH JESD22-B106C Dimensions DO-214AB (SMC J-Bend) Dimensions Cathode Band (for Uni-directional products only) C A B H D F E J Inches Min Millimeters Max Min Max A 0.114 0.126 2.900 3.200 B 0.260 0.280 6.600 7.110 C 0.220 0.245 5.590 6.220 D 0.079 0.103 2.060 2.620 E 0.030 0.060 0.760 1.520 F 0.002 0.008 0.051 0.203 G 0.305 0.320 7.750 8.130 H 0.006 0.012 0.152 0.305 G I 0.129 - 3.300 - K J 0.094 - 2.400 - K - 0.165 L 0.094 - L I 4.200 2.400 - Solder Pads (all dimensions in mm) SMDJ-HRA Series 5 (c)2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/18/13 Transient Voltage Suppression Diodes Surface Mount - 3000W > SMDJ-HRA series Part Numbering System SMDJ XXX C A -HR A Part Marking System TVS Diode Arrays (SPATM Family of Products) Cathode Band WITHOUT GROUP B TEST F HIGH RELIABILITY 5% VOLTAGE TOLERANCE Littelfuse Logo BI-DIRECTIONAL XXXX YMXXX VOLTAGE SERIES Marking Code Trace Code Marking Y:Year Code M: Month Code XXX: Lot Code Packaging Part number Component Package SMDJxxxXX-HRA DO-214AB 3000 Tape & Reel - 16mm/13" tape EIA STD RS-481 SMDJxxxXX-HRAT7 DO-214AB 500 Tape & Reel - 16mm/7" tape EIA STD RS-481 Packaging Option Quantity Packaging Specification Tape and Reel Specification 0.157 (4.0) Cathode 0.63 (16.0) 0.315 (8.0) Optional 7" 7.0 (187) 13" 13.0 (330) 0.80 (20.2) Arbor Hole Dia. 0.65 (16.4) SMDJ-HRA Series 0.059 DIA (1.5) Cover tape Dimensions are in inches (and millimeters). Direction of Feed 6 (c)2013 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/18/13