• All specifications are subject to change without notice.
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
Inductors for High-frequency Circuits
Multilayer/STD
MLG series
Type:
Issue date:
MLG0603S 0603[0201 inch]*
MLG1005S 1005[0402 inch]
MLG1608 1608[0603 inch]
* Dimensions Code JIS[EIA]
November 2011
• All specifications are subject to change without notice.
(1/13)
001-07 / 20111129 / e521_mlg
Inductors for High-frequency Circuits
Multilayer/STD
MLG Series MLG0603S
FEATURES
• Inductance values are supported from 0.3 to 180nH.
• Advanced monolithic structure is formed using a multilayering
and sintering process with ceramic and conductive materials for
high-frequency.
• The products contain no lead and also support lead-free
soldering.
• It is a product conforming to RoHS directive.
APPLICATIONS
For high-frequency applications including mobile phones, high
frequency modules (PA, VCO, FEM etc.), Bluetooth, W-LAN, UWB
and tuners.
SHAPES AND DIMENSIONS
RECOMMENDED PC BOARD PATTERN
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
PRODUCT IDENTIFICATION
(1) Series name
(2) Dimensions L×W
(3) Type name
(4) Inductance
(5) Tolerance
(6) Packaging style
(7) TDK internal code
SPECIFICATIONS
PACKAGING STYLE AND QUANTITIES
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components.
The preheating temperature should be set so that the
temperature difference between the solder temperature and
product temperature does not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• When hand soldering, apply the soldering iron to the printed
circuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
Conformity to RoHS Directive
0.6±0.03
0.15±0.05
0.3±0.03
0.3±0.03
Weight: 0.2mg
Dimensions in mm
0.3 0.250.25
0.3
Natural
cooling
10s max.
Preheating
60 to 120s
Soldering
30 to 60s
230˚C
250 to 260˚C
180˚C
150˚C
Time(s)
MLG 0603 S 2N2 S T
(1) (2) (3) (4) (5) (6) (7)
0603 0.6×0.3mm (L×W)
2N2 2.2nH
12N 12nH
R10 100nH
B ±0.1nH
C ±0.2nH
S ±0.3nH
H±3%
J±5%
T Taping (reel)
Operating temperature range –55 to +125°C
Storage temperature range –55 to +125°C(After mount)
Packaging style Quantity
Taping 15000 pieces/reel
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
(2/13)
001-07 / 20111129 / e521_mlg
ELECTRICAL CHARACTERISTICS
∗ : Please specify inductance tolerance, B (±0.1nH), C (±0.2nH), S (±0.3nH), H (±3%) or J (±5%).
Please contact us for information on inductance tolerance, G(±2%).
• Test equipment
Inductance Q : HP4291A+16197A, or equivalent
SRF: HP8720C, or equivalent
Rdc: YOKOGAWA TYPE7561, or equivalent
Inductance
(nH)
Inductance
tolerance
Q
min.
Test frequency
L, Q (MHz)
Self-resonant
frequency
(GHz)
DC resistance
(Ω)Rated current
(mA)max. Part No.∗
min. typ. max. typ.
0.3 ±0.1, ±0.2nH — 100 10.0 20 up 0.1 0.02 600 MLG0603S0N3T
0.4 ±0.1, ±0.2nH — 100 10.0 20 up 0.1 0.02 600 MLG0603S0N4T
0.5 ±0.1, ±0.2nH — 100 10.0 20 up 0.1 0.02 600 MLG0603S0N5T
0.6 ±0.1, ±0.2nH — 100 10.0 20 up 0.1 0.02 600 MLG0603S0N6T
0.7 ±0.1, ±0.2nH — 100 10.0 16.3 0.1 0.02 600 MLG0603S0N7T
0.8 ±0.1, ±0.2nH — 100 10.0 16.1 0.1 0.03 600 MLG0603S0N8T
0.9 ±0.1, ±0.2nH — 100 10.0 13.8 0.1 0.03 600 MLG0603S0N9T
1.0 ±0.1, ±0.2, 0.3nH 4 100 10.0 14.4 0.1 0.04 600 MLG0603S1N0T
1.1 ±0.1, ±0.2, 0.3nH 4 100 10.0 13.6 0.15 0.04 550 MLG0603S1N1T
1.2 ±0.1, ±0.2, 0.3nH 4 100 10.0 12.3 0.15 0.06 550 MLG0603S1N2T
1.3 ±0.1, ±0.2, 0.3nH 4 100 9.0 11.4 0.15 0.07 550 MLG0603S1N3T
1.5 ±0.1, ±0.2, 0.3nH 4 100 9.0 10.4 0.15 0.07 550 MLG0603S1N5T
1.6 ±0.1, ±0.2, 0.3nH 4 100 9.0 11.5 0.2 0.09 500 MLG0603S1N6T
1.8 ±0.1, ±0.2, 0.3nH 4 100 8.5 10.0 0.2 0.12 500 MLG0603S1N8T
2.0 ±0.1, ±0.2, 0.3nH 4 100 8.2 9.8 0.25 0.14 400 MLG0603S2N0T
2.2 ±0.1, ±0.2, 0.3nH 4 100 8.0 8.9 0.25 0.14 400 MLG0603S2N2T
2.4 ±0.1, ±0.2, 0.3nH 4 100 8.0 9.2 0.25 0.15 300 MLG0603S2N4T
2.7 ±0.1, ±0.2, 0.3nH 4 100 6.5 8.1 0.25 0.15 300 MLG0603S2N7T
3.0 ±0.1, ±0.2, 0.3nH 4 100 6.2 7.8 0.3 0.20 300 MLG0603S3N0T
3.3 ±0.1, ±0.2, 0.3nH 4 100 5.8 7.0 0.35 0.23 300 MLG0603S3N3T
3.6 ±0.1, ±0.2, 0.3nH 4 100 5.5 6.9 0.35 0.22 300 MLG0603S3N6T
3.9 ±0.1, ±0.2, 0.3nH 5 100 5.0 6.6 0.4 0.27 300 MLG0603S3N9T
4.3 ±3%, ±0.3nH 5 100 5.0 6.4 0.4 0.27 300 MLG0603S4N3T
4.7 ±3%, ±0.3nH 5 100 4.5 5.4 0.45 0.28 300 MLG0603S4N7T
5.1 ±3%, ±0.3nH 5 100 4.5 5.5 0.45 0.23 250 MLG0603S5N1T
5.6 ±3%, ±0.3nH 5 100 4.2 5.3 0.5 0.31 250 MLG0603S5N6T
6.2 ±3%, ±0.3nH 5 100 4.2 5.1 0.55 0.32 250 MLG0603S6N2T
6.8 ±3, ±5% 5 100 3.6 4.4 0.6 0.32 250 MLG0603S6N8T
7.5 ±3, ±5% 5 100 4.2 5.3 0.7 0.43 200 MLG0603S7N5T
8.2 ±3, ±5% 5 100 3.8 4.5 0.7 0.45 200 MLG0603S8N2T
9.1 ±3, ±5% 5 100 3.4 4.9 0.8 0.51 200 MLG0603S9N1T
10 ±3, ±5% 5 100 3.2 4.1 0.8 0.53 200 MLG0603S10NT
11 ±3, ±5% 6 100 3.0 3.7 0.8 0.53 200 MLG0603S11NT
12 ±3, ±5% 6 100 2.8 3.6 0.9 0.63 180 MLG0603S12NT
13 ±3, ±5% 6 100 2.7 3.4 0.9 0.60 180 MLG0603S13NT
15 ±3, ±5% 6 100 2.5 3.3 1.1 0.69 180 MLG0603S15NT
16 ±3, ±5% 6 100 2.3 3.0 1.1 0.70 180 MLG0603S16NT
18 ±3, ±5% 6 100 2.2 2.8 1.2 0.78 150 MLG0603S18NT
20 ±3, ±5% 6 100 2.1 2.6 1.2 0.75 150 MLG0603S20NT
22 ±3, ±5% 6 100 2.0 2.5 1.2 0.88 150 MLG0603S22NT
24 ±3, ±5% 6 100 1.9 2.3 1.3 0.90 150 MLG0603S24NT
27 ±3, ±5% 6 100 1.8 2.2 1.5 1.00 100 MLG0603S27NT
30 ±3, ±5% 6 100 1.6 2.0 1.6 0.95 100 MLG0603S30NT
33 ±3, ±5% 6 100 1.6 2.0 1.8 1.20 100 MLG0603S33NT
36 ±3, ±5% 6 100 1.5 1.8 2.0 1.68 50 MLG0603S36NT
39 ±3, ±5% 6 100 1.4 1.6 2.0 1.40 50 MLG0603S39NT
43 ±3, ±5% 6 100 1.3 1.6 2.2 1.91 50 MLG0603S43NT
47 ±3, ±5% 6 100 1.3 1.5 2.2 1.48 50 MLG0603S47NT
51 ±3, ±5% 5 100 1.2 1.5 2.8 1.98 50 MLG0603S51NT
56 ±3, ±5% 5 100 1.2 1.4 3.2 2.11 50 MLG0603S56NT
62 ±3, ±5% 5 100 1.1 1.3 3.3 2.22 50 MLG0603S62NT
68 ±3, ±5% 5 100 1.05 1.24 3.5 2.40 50 MLG0603S68NT
75 ±3, ±5% 5 100 0.95 1.17 3.8 2.67 50 MLG0603S75NT
82 ±3, ±5% 5 100 0.90 1.08 4.0 2.80 50 MLG0603S82NT
91 ±3, ±5% 5 100 0.77 0.94 4.3 2.97 50 MLG0603S91NT
100 ±3, ±5% 5 100 0.77 0.94 4.5 3.13 50 MLG0603SR10T
110 ±3, ±5% 5 100 0.77 0.94 6.5 5.24 50 MLG0603SR11T
120 ±3, ±5% 5 100 0.70 0.88 7.0 5.53 50 MLG0603SR12T
130 ±3, ±5% 5 100 0.67 0.84 7.3 5.68 50 MLG0603SR13T
150 ±3, ±5% 5 100 0.64 0.77 8.0 6.24 50 MLG0603SR15T
160 ±3, ±5% 5 100 0.60 0.73 8.3 6.67 50 MLG0603SR16T
180 ±3, ±5% 5 100 0.56 0.68 8.5 6.99 50 MLG0603SR18T
• All specifications are subject to change without notice.
(3/13)
001-07 / 20111129 / e521_mlg
L, Q vs. FREQUENCY CHARACTERISTICS
Part No. Inductance(nH)typ. Q typ.
500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz
MLG0603S0N3 0.3 0.3 0.3 0.3 0.3 14min. 18min. 29min. 32min. 35min.
MLG0603S0N4 0.4 0.4 0.4 0.4 0.4 14min. 18min. 29min. 32min. 35min.
MLG0603S0N5 0.5 0.5 0.5 0.5 0.5 14 18 29 32 35
MLG0603S0N6 0.6 0.6 0.5 0.5 0.5 16 20 33 34 39
MLG0603S0N7 0.7 0.6 0.6 0.6 0.6 16 21 33 35 39
MLG0603S0N8 0.7 0.7 0.7 0.7 0.7 15 20 32 34 38
MLG0603S0N9 0.8 0.8 0.8 0.8 0.8 15 19 30 32 35
MLG0603S1N0 0.9 0.9 0.9 0.9 0.9 14 18 29 30 34
MLG0603S1N1 1.0 1.0 1.0 1.0 1.0 14 19 29 31 34
MLG0603S1N2 1.1 1.1 1.1 1.1 1.1 14 18 29 30 34
MLG0603S1N3 1.2 1.2 1.2 1.2 1.2 14 18 29 30 33
MLG0603S1N5 1.4 1.4 1.4 1.4 1.4 15 19 29 30 34
MLG0603S1N6 1.5 1.5 1.5 1.5 1.5 14 18 29 30 33
MLG0603S1N8 1.7 1.7 1.7 1.7 1.7 15 19 29 30 33
MLG0603S2N0 1.9 1.9 1.9 1.9 1.9 14 18 28 29 32
MLG0603S2N2 2.1 2.0 2.1 2.1 2.1 14 18 27 28 31
MLG0603S2N4 2.2 2.2 2.2 2.3 2.3 14 18 27 29 32
MLG0603S2N7 2.5 2.5 2.6 2.6 2.7 15 19 28 29 31
MLG0603S3N0 2.8 2.8 2.9 2.9 3.0 15 19 29 31 33
MLG0603S3N3 3.1 3.1 3.2 3.3 3.4 15 19 28 29 31
MLG0603S3N6 3.4 3.4 3.5 3.6 3.7 14 18 26 27 29
MLG0603S3N9 3.7 3.7 3.8 3.9 4.1 15 19 29 29 32
MLG0603S4N3 4.1 4.1 4.3 4.4 4.6 14 18 27 27 29
MLG0603S4N7 4.4 4.4 4.8 4.9 5.2 15 20 28 29 30
MLG0603S5N1 4.8 4.8 5.1 5.3 5.6 14 18 25 26 27
MLG0603S5N6 5.3 5.3 5.7 5.9 6.4 16 20 27 28 29
MLG0603S6N2 5.9 5.9 6.5 6.8 7.5 15 18 25 25 26
MLG0603S6N8 6.4 6.5 7.4 7.8 8.7 15 19 26 26 25
MLG0603S7N5 7.1 7.1 7.8 8.0 8.7 14 18 25 26 26
MLG0603S8N2 7.8 7.8 8.8 9.3 10.4 15 18 24 24 24
MLG0603S9N1 8.6 8.6 9.8 10.3 11.5 14 17 22 22 22
MLG0603S10N 10 10 12 12 15 15 18 23 22 21
MLG0603S11N 1011131416 1518222220
MLG0603S12N 11 12 14 15 19 16 19 24 23 20
MLG0603S13N 1213161722 1416191815
MLG0603S15N 1415202333 1519201814
MLG0603S16N 1516222537 1416161511
MLG0603S18N 17182835 14171513
MLG0603S20N 19 20 32 13 16 14
MLG0603S22N 21 23 40 15 17 13
MLG0603S24N 23 24 45 13 15 13
MLG0603S27N 27 29 15 17
MLG0603S30N 29 32 13 15
MLG0603S33N 33 36 14 16
MLG0603S36N 36 40 14 15
MLG0603S39N 40 47 13 14
MLG0603S43N 44 53 14 14
MLG0603S47N 49 60 13 13
MLG0603S51N 52 64 11 11
MLG0603S56N 59 77 12 11
MLG0603S62N 66 88 11 10
MLG0603S68N 74 104 13 11
MLG0603S75N 82 119 10 8
MLG0603S82N 96 161 12 8
MLG0603S91N 109 9
MLG0603SR10 129 11
MLG0603SR11 134 10
MLG0603SR12 156 9
MLG0603SR13 172 8
MLG0603SR15 223 7
MLG0603SR16 238 7
MLG0603SR18 318 6
• All specifications are subject to change without notice.
(4/13)
001-07 / 20111129 / e521_mlg
TYPICAL ELECTRICAL CHARACTERISTICS
INDUCTANCE vs. FREQUENCY CHARACTERISTICS Q vs. FREQUENCY CHARACTERISTICS
PACKAGING STYLES
REEL DIMENSIONS
TAPE DIMENSIONS
1
0
10
100
1000
10 100 1000 10000
Inductance(nH)
Frequency(MHz)
33nH
10nH
3.3nH
100nH
1.0nH
10 100 1000 10000
0
10
20
30
40
50
Q
Frequency(MHz)
33nH
10nH
3.3nH
100nH
1.0nH
1.0
ø180±2.0
2.0±0.5
ø13±0.2
ø21±0.8
ø60min.
14.4max.
Dimensions in mm
8.4 +2.0
–0.0
8.0±0.3 3.5±0.05
1.75±0.1
4.0±0.1
2.0±0.05 2.0±0.05
Sprocket hole Cavity
1.5 +0.1
–0.0
0.5max. 0.38±0.05
0.68±0.05
160min. Taping 200min.
300min.
Drawing direction
Dimensions in mm
• All specifications are subject to change without notice.
(5/13)
001-07 / 20111129 / e521_mlg
Inductors for High-frequency Circuits
Multilayer/STD
MLG Series MLG1005S
FEATURES
• Inductance values are supported from 0.3 to 390nH.
• Advanced monolithic structure is formed using a multilayering
and sintering process with ceramic and conductive materials for
high-frequency.
• The products contain no lead and also support lead-free
soldering.
• It is a product conforming to RoHS directive.
APPLICATIONS
For high-frequency applications including mobile phones, high
frequency modules (PA, VCO, FEM etc.), Bluetooth, W-LAN, UWB
and tuners.
SHAPES AND DIMENSIONS
RECOMMENDED PC BOARD PATTERN
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
PRODUCT IDENTIFICATION
(1) Series name
(2) Dimensions
(3) Type name
(4) Inductance
(5) Tolerance
(6) Packaging style
(7) TDK internal code
SPECIFICATIONS
PACKAGING STYLE AND QUANTITIES
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components.
The preheating temperature should be set so that the
temperature difference between the solder temperature and
product temperature does not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• When hand soldering, apply the soldering iron to the printed
circuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
Conformity to RoHS Directive
1.0±0.05
0.25±0.1
0.5±0.05
0.5±0.05
Weight: 1mg
Dimensions in mm
0.40.5 0.5
0.5
Natural
cooling
10s max.
Preheating
60 to 120s
Soldering
30 to 60s
230˚C
250 to 260˚C
180˚C
150˚C
Time(s)
MLG 1005 S 2N2 S T
(1) (2) (3) (4) (5) (6) (7)
1005 1.0×0.5mm (L×W)
2N2 2.2nH
12N 12nH
R10 100nH
B ±0.1nH
C ±0.2nH
S ±0.3nH
H±3%
J±5%
T Taping (reel)
Operating temperature range –55 to +125°C
Storage temperature range –55 to +125°C(After mount)
Packaging style Quantity
Taping 10000 pieces/reel
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
(6/13)
001-07 / 20111129 / e521_mlg
ELECTRICAL CHARACTERISTICS
∗ : Please specify inductance tolerance, (B±0.1nH), (C±0.2nH), (S±0.3nH), (H±3%) or (J±5%).
Please contact us for information on inductance tolerance, G(±2%).
• Test equipment
Inductance Q : HP4291A+16193A, or equivalent
SRF: HP8720C, or equivalent
Rdc: YOKOGAWA TYPE7561, or equivalent
Inductance
(nH)
Inductance
tolerance
Q
min.
Test frequency
L, Q (MHz)
Self-resonant
frequency
(GHz)
DC resistance
(Ω)Rated current
(mA)max. Part No.∗
min. typ. max. typ.
0.3 ±0.1nH, ±0.2nH — 100 10.0 20up 0.10 0.01 1000 MLG1005S0N3T
0.4 ±0.1nH, ±0.2nH — 100 10.0 20up 0.10 0.01 1000 MLG1005S0N4T
0.5 ±0.1nH, ±0.2nH — 100 10.0 20up 0.10 0.01 1000 MLG1005S0N5T
0.6 ±0.1nH, ±0.2nH — 100 10.0 20up 0.10 0.01 1000 MLG1005S0N6T
0.7 ±0.1nH, ±0.2nH — 100 10.0 18.7 0.10 0.02 1000 MLG1005S0N7T
0.8 ±0.1nH, ±0.2nH — 100 10.0 16.4 0.10 0.02 1000 MLG1005S0N8T
0.9 ±0.1nH,±0.2nH — 100 10.0 17.7 0.10 0.04 1000 MLG1005S0N9T
1.0 ±0.1nH, ±0.2, 0.3nH 7 100 10.0 13.8 0.10 0.04 1000 MLG1005S1N0T
1.1 ±0.1nH, ±0.2, 0.3nH 7 100 10.0 19.3 0.10 0.03 1000 MLG1005S1N1T
1.2 ±0.1nH, ±0.2, 0.3nH 7 100 10.0 11.6 0.10 0.04 1000 MLG1005S1N2T
1.3 ±0.1nH, ±0.2, 0.3nH 7 100 8.00 11.7 0.10 0.04 1000 MLG1005S1N3T
1.5 ±0.1nH, ±0.2, 0.3nH 7 100 8.00 9.6 0.10 0.06 1000 MLG1005S1N5T
1.6 ±0.1nH, ±0.2, 0.3nH 7 100 7.50 9.4 0.12 0.05 1000 MLG1005S1N6T
1.8 ±0.1nH, ±0.2, 0.3nH 7 100 8.00 10.3 0.15 0.06 900 MLG1005S1N8T
2.0 ±0.1nH, ±0.2, 0.3nH 7 100 7.50 9.3 0.15 0.07 900 MLG1005S2N0T
2.2 ±0.1nH, ±0.2, 0.3nH 7 100 7.00 8.6 0.15 0.08 900 MLG1005S2N2T
2.4 ±0.1nH, ±0.2, 0.3nH 7 100 7.00 8.2 0.15 0.08 800 MLG1005S2N4T
2.7 ±0.1nH, ±0.2, 0.3nH 7 100 6.00 7.3 0.15 0.08 800 MLG1005S2N7T
3.0 ±0.1nH, ±0.2, 0.3nH 7 100 5.50 6.8 0.20 0.09 800 MLG1005S3N0T
3.3 ±0.1nH, ±0.2, 0.3nH 8 100 5.00 6.1 0.20 0.09 800 MLG1005S3N3T
3.6 ±0.1nH, ±0.2, 0.3nH 8 100 5.00 6.7 0.20 0.09 700 MLG1005S3N6T
3.9 ±0.1nH, ±0.2, 0.3nH 8 100 5.00 6.5 0.20 0.11 700 MLG1005S3N9T
4.3 ±0.2nH, ±0.3nH 8 100 4.50 6.0 0.20 0.11 700 MLG1005S4N3T
4.7 ±0.2nH, ±0.3nH 8 100 4.50 5.4 0.25 0.12 700 MLG1005S4N7T
5.1 ±0.2nH, ±0.3nH 8 100 4.00 5.0 0.25 0.13 600 MLG1005S5N1T
5.6 ±0.2nH, ±0.3nH 8 100 4.00 5.3 0.25 0.14 600 MLG1005S5N6T
6.2 ±3%, ±0.3nH 8 100 4.00 4.7 0.25 0.16 600 MLG1005S6N2T
6.8 ±3%, ±5% 8 100 3.50 4.4 0.25 0.15 600 MLG1005S6N8T
7.5 ±3%, ±5% 8 100 3.00 4.1 0.25 0.15 500 MLG1005S7N5T
8.2 ±3%, ±5% 8 100 3.00 4.0 0.30 0.19 500 MLG1005S8N2T
9.1 ±3%, ±5% 8 100 3.00 3.8 0.30 0.20 500 MLG1005S9N1T
10 ±3%, ±5% 8 100 2.50 3.4 0.35 0.22 500 MLG1005S10NT
11 ±3%, ±5% 8 100 2.50 3.5 0.40 0.28 400 MLG1005S11NT
12 ±3%, ±5% 8 100 2.50 3.0 0.40 0.25 400 MLG1005S12NT
13 ±3%, ±5% 8 100 2.40 2.9 0.50 0.26 400 MLG1005S13NT
15 ±3%, ±5% 8 100 2.20 2.8 0.55 0.35 400 MLG1005S15NT
16 ±3%, ±5% 8 100 2.10 2.7 0.55 0.32 400 MLG1005S16NT
18 ±3%, ±5% 8 100 2.00 2.5 0.60 0.40 350 MLG1005S18NT
20 ±3%, ±5% 8 100 1.90 2.4 0.60 0.38 350 MLG1005S20NT
22 ±3%, ±5% 8 100 1.70 2.2 0.70 0.46 350 MLG1005S22NT
24 ±3%, ±5% 8 100 1.70 2.1 0.70 0.43 350 MLG1005S24NT
27 ±3%, ±5% 8 100 1.60 2.0 0.80 0.53 300 MLG1005S27NT
30 ±3%, ±5% 8 100 1.50 1.9 0.80 0.50 300 MLG1005S30NT
33 ±3%, ±5% 8 100 1.40 1.8 0.90 0.59 300 MLG1005S33NT
36 ±3%, ±5% 8 100 1.30 1.7 1.00 0.62 250 MLG1005S36NT
39 ±3%, ±5% 8 100 1.20 1.6 1.00 0.65 250 MLG1005S39NT
43 ±3%, ±5% 8 100 1.20 1.6 1.10 0.67 250 MLG1005S43NT
47 ±3%, ±5% 8 100 1.10 1.4 1.20 0.75 250 MLG1005S47NT
51 ±3%, ±5% 8 100 1.10 1.5 1.20 0.72 250 MLG1005S51NT
56 ±3%, ±5% 8 100 1.00 1.3 1.30 0.83 200 MLG1005S56NT
62 ±3%, ±5% 8 100 1.00 1.3 1.40 0.85 200 MLG1005S62NT
68 ±3%, ±5% 8 100 0.80 1.1 1.50 0.87 200 MLG1005S68NT
75 ±3%, ±5% 8 100 0.75 1.1 1.50 0.93 200 MLG1005S75NT
82 ±3%, ±5% 8 100 0.70 1.0 1.60 1.01 200 MLG1005S82NT
91 ±3%, ±5% 8 100 0.70 0.9 1.80 1.14 200 MLG1005S91NT
• All specifications are subject to change without notice.
(7/13)
001-07 / 20111129 / e521_mlg
ELECTRICAL CHARACTERISTICS
∗ : Please specify inductance tolerance, (B±0.1nH), (C±0.2nH), (S±0.3nH), (H±3%) or (J±5%).
Please contact us for information on inductance tolerance, G(±2%).
• Test equipment
Inductance Q : HP4291A+16193A, or equivalent
SRF: HP8720C, or equivalent
Rdc: YOKOGAWA TYPE7561, or equivalent
Inductance
(nH)
Inductance
tolerance
Q
min.
Test frequency
L, Q (MHz)
Self-resonant
frequency
(GHz)
DC resistance
(Ω)Rated current
(mA)max. Part No.∗
min. typ. max. typ.
100 ±3%, ±5% 8 100 0.70 0.9 2.00 1.37 200 MLG1005SR10T
110 ±3%, ±5% 8 100 0.70 0.9 2.20 1.48 150 MLG1005SR11T
120 ±3%, ±5% 8 100 0.60 0.8 2.20 1.48 150 MLG1005SR12T
130 ±3%, ±5% 8 100 0.60 0.8 2.50 1.68 150 MLG1005SR13T
150 ±3%, ±5% 8 100 0.55 0.7 3.50 2.44 150 MLG1005SR15T
160 ±3%, ±5% 8 100 0.50 0.6 3.80 2.74 150 MLG1005SR16T
180 ±3%, ±5% 8 100 0.50 0.6 3.80 2.88 150 MLG1005SR18T
200 ±3%, ±5% 8 100 0.42 0.5 4.20 3.15 100 MLG1005SR20T
220 ±3%, ±5% 8 100 0.45 0.5 4.20 3.02 100 MLG1005SR22T
240 ±3%, ±5% 8 100 0.40 0.5 4.80 3.42 100 MLG1005SR24T
270 ±3%, ±5% 8 100 0.40 0.5 4.80 3.54 100 MLG1005SR27T
300 ±3%, ±5% 6 50 0.35 0.4 6.50 4.82 50 MLG1005SR30T
330 ±3%, ±5% 6 50 0.35 0.4 7.00 5.21 50 MLG1005SR33T
360 ±3%, ±5% 6 50 0.30 0.4 7.50 5.39 50 MLG1005SR36T
390 ±3%, ±5% 6 50 0.30 0.4 8.00 5.97 50 MLG1005SR39T
• All specifications are subject to change without notice.
(8/13)
001-07 / 20111129 / e521_mlg
L, Q vs. FREQUENCY CHARACTERISTICS
Part No. Inductance(nH)typ. Q typ.
500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz
MLG1005S0N3 0.3 0.3 0.3 0.3 0.3 22min. 27min. 46min. 49min. 53min.
MLG1005S0N4 0.4 0.4 0.4 0.4 0.4 22min. 27min. 46min. 49min. 53min.
MLG1005S0N5 0.5 0.5 0.5 0.5 0.5 22min. 27min. 46min. 49min. 53min.
MLG1005S0N6 0.6 0.6 0.6 0.6 0.6 22 27 46 49 53
MLG1005S0N7 0.7 0.7 0.7 0.7 0.7 22 28 45 49 54
MLG1005S0N8 0.8 0.8 0.8 0.8 0.8 26 34 57 60 66
MLG1005S0N9 0.9 0.8 0.8 0.8 0.8 21 27 44 47 53
MLG1005S1N0 0.9 0.9 0.9 0.9 0.9 22 29 48 50 56
MLG1005S1N1 1.0 1.0 1.0 1.0 1.0 23 29 47 50 57
MLG1005S1N2 1.1 1.1 1.1 1.1 1.1 23 29 48 50 56
MLG1005S1N3 1.2 1.2 1.2 1.2 1.2 22 27 44 47 53
MLG1005S1N5 1.4 1.4 1.4 1.5 1.5 23 29 47 50 56
MLG1005S1N6 1.5 1.5 1.5 1.6 1.6 23 29 46 49 54
MLG1005S1N8 1.7 1.7 1.7 1.7 1.7 20 26 41 43 49
MLG1005S2N0 1.9 1.9 1.9 1.9 1.9 21 25 41 43 48
MLG1005S2N2 2.1 2.1 2.1 2.1 2.2 22 27 44 47 52
MLG1005S2N4 2.3 2.3 2.3 2.3 2.4 21 26 42 44 49
MLG1005S2N7 2.6 2.6 2.6 2.7 2.7 22 27 43 45 50
MLG1005S3N0 2.9 2.9 3.0 3.0 3.1 24 29 47 49 54
MLG1005S3N3 3.2 3.2 3.3 3.4 3.5 24 30 46 48 53
MLG1005S3N6 3.4 3.4 3.6 3.6 3.8 21 26 40 42 46
MLG1005S3N9 3.7 3.7 3.9 3.9 4.1 22 28 43 45 50
MLG1005S4N3 4.1 4.1 4.3 4.4 4.6 24 30 47 49 53
MLG1005S4N7 4.5 4.5 4.8 4.9 5.2 23 30 45 47 50
MLG1005S5N1 4.9 4.9 5.4 5.6 6.1 23 29 42 43 44
MLG1005S5N6 5.4 5.4 5.8 5.9 6.3 22 28 42 43 45
MLG1005S6N2 6.0 6.0 6.8 7.1 7.8 24 29 42 43 43
MLG1005S6N8 6.5 6.6 7.4 7.8 8.6 23 28 40 41 41
MLG1005S7N5 7.2 7.4 8.6 9.2 10.5 24 30 41 41 39
MLG1005S8N2 7.9 8.0 9.3 9.9 11.3 23 28 38 38 36
MLG1005S9N1 8.8 9.0 10.8 11.6 13.7 24 30 40 39 36
MLG1005S10N 9.7 9.9 12.4 13.5 16.7 24 30 37 36 31
MLG1005S11N 10.6 10.9 13.8 15.1 19.0 23 28 34 33 28
MLG1005S12N 11.7 12.1 16.2 18.3 23 29 33 31
MLG1005S13N 12.6 13.0 18.3 21.3 20 24 25 22
MLG1005S15N 14.7 15.3 22.0 26.0 23 28 29 26
MLG1005S16N 15.6 16.2 24.1 29.0 22 26 26 22
MLG1005S18N 17.7 18.6 29.0 23 28 26
MLG1005S20N 19.7 20.8 36.8 21 25 21
MLG1005S22N 21.8 23.3 22 27
MLG1005S24N 23.8 25.5 22 26
MLG1005S27N 27.0 29.6 20 23
MLG1005S30N 30.1 33.5 19 21
MLG1005S33N 33.5 37.8 20 23
MLG1005S36N 36.7 41.5 21 23
MLG1005S39N 40.3 46.9 20 21
MLG1005S43N 44.3 51.6 20 21
MLG1005S47N 50.2 63.2 19 20
MLG1005S51N 53.7 65.6 19 19
MLG1005S56N 60.9 80.2 19 18
MLG1005S62N 67.5 89.8 18 16
MLG1005S68N 75.8 107.5
17 15
MLG1005S75N 86.5 135.2 17 13
MLG1005S82N 96.9 16
MLG1005S91N 111.0 15
MLG1005SR10 128.9 14
MLG1005SR11 140.8 15
MLG1005SR12 175.2 12
MLG1005SR13 187.8 13
MLG1005SR15 284.7 11
MLG1005SR16
MLG1005SR18
MLG1005SR20
MLG1005SR22
MLG1005SR24
MLG1005SR27
MLG1005SR30
MLG1005SR33
MLG1005SR36
MLG1005SR39
• All specifications are subject to change without notice.
(9/13)
001-07 / 20111129 / e521_mlg
TYPICAL ELECTRICAL CHARACTERISTICS
INDUCTANCE vs. FREQUENCY CHARACTERISTICS Q vs. FREQUENCY CHARACTERISTICS
PACKAGING STYLES
REEL DIMENSIONS
TAPE DIMENSIONS
1
0
10
100
1000
10 100 1000 10000
Inductance(nH)
Frequency(MHz)
33nH
10nH
3.3nH
100nH
270nH
1.0nH
10 100 1000 10000
0
10
20
30
40
50
Q
Frequency(MHz)
33nH
10nH
3.3nH
100nH
270nH
1.0nH
1.0
ø180±2.0
2.0±0.5
ø13±0.2
ø21±0.8
ø60min.
14.4max.
Dimensions in mm
8.4 +2.0
–0.0
1.12±0.1
0.8max. 0.62±0.1
8.0±0.3 3.5±0.05
1.75±0.1
4.0±0.1
2.0±0.05 2.0±0.05
Sprocket hole Cavity
1.5 +0.1
–0.0
160min. Taping 200min.
300min.
Drawing direction
Dimensions in mm
• All specifications are subject to change without notice.
(10/13)
001-07 / 20111129 / e521_mlg
Inductors for High-frequency Circuits
Multilayer/STD
MLG Series MLG1608
FEATURES
• Inductance values are supported from 1 to 1000nH.
• Advanced monolithic structure is formed using a multilayering
and sintering process with ceramic and conductive materials for
high-frequency.
• The products contain no lead and also support lead-free
soldering.
• It is a product conforming to RoHS directive.
APPLICATIONS
For high-frequency applications including mobile phones, high
frequency modules (PA, VCO, FEM etc.), Bluetooth, W-LAN, UWB
and tuners.
SHAPES AND DIMENSIONS
RECOMMENDED PC BOARD PATTERN
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
PRODUCT IDENTIFICATION
(1) Series name
(2) Dimensions
(3) Type name
(4) Inductance
(5) Tolerance
(6) Packaging style
(7) TDK internal code
SPECIFICATIONS
PACKAGING STYLE AND QUANTITIES
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components.
The preheating temperature should be set so that the
temperature difference between the solder temperature and
product temperature does not exceed 150°C.
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• When hand soldering, apply the soldering iron to the printed
circuit board only. Temperature of the iron tip should not exceed
300°C. Soldering time should not exceed 3 seconds.
Conformity to RoHS Directive
1.6±0.15
0.3±0.2
0.8±0.15
0.8±0.15
Weight: 4mg
Dimensions in mm
0.80.6 0.6
0.8
Natural
cooling
10s max.
Preheating
60 to 120s
Soldering
30 to 60s
230˚C
250 to 260˚C
180˚C
150˚C
Time(s)
MLG 1608 B 2N2 S T
(1) (2) (3) (4) (5) (6) (7)
1608 1.6×0.8mm (L×W)
2N2 2.2nH
12N 12nH
R10 100nH
1R0 1000nH
S ±0.3nH
D ±0.5nH
J±5%
T Taping (reel)
Operating temperature range –55 to +125°C
Storage temperature range –55 to +125°C(After mount)
Packaging style Quantity
Taping 4000 pieces/reel
• Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
(11/13)
001-07 / 20111129 / e521_mlg
ELECTRICAL CHARACTERISTICS
• Because it provides for a product of smaller inductance tolerance, please refer.
• Test equipment
Inductance Q : HP4291A+16193A, or equivalent
SRF: HP8720C, or equivalent
Rdc: YOKOGAWA TYPE7561, or equivalent
Inductance
(nH)
Inductance
tolerance
Q
min.
Test frequency
L, Q (MHz)
Self-resonant
frequency
(GHz)
DC resistance
(Ω)Rated current
(mA)max. Part No.
min. typ. max. typ.
1 ±0.3nH 8 100 10.0 20up 0.10 0.03 600 MLG1608B1N0ST
1.2 ±0.3nH 8 100 10.0 20up 0.10 0.04 600 MLG1608B1N2ST
1.5 ±0.3nH 8 100 10.0 19.6 0.10 0.03 600 MLG1608B1N5ST
1.8 ±0.3nH 8 100 10.0 16.6 0.10 0.04 600 MLG1608B1N8ST
2.2 ±0.3nH 10 100 8.0 10.8 0.10 0.05 600 MLG1608B2N2ST
2.7 ±0.3nH 10 100 7.0 8.8 0.12 0.06 600 MLG1608B2N7ST
3.3 ±0.3nH 10 100 6.5 8.8 0.12 0.06 600 MLG1608B3N3ST
3.9 ±0.3nH 10 100 6.0 7.9 0.14 0.06 600 MLG1608B3N9ST
4.7 ±0.3nH 10 100 5.0 6.8 0.15 0.08 600 MLG1608B4N7ST
5.6 ±0.5nH 10 100 5.0 6.8 0.16 0.08 600 MLG1608B5N6DT
6.8 ±0.5nH 10 100 4.5 5.7 0.18 0.10 600 MLG1608B6N8DT
8.2 ±0.5nH 10 100 4.5 5.6 0.20 0.10 600 MLG1608B8N2DT
10 ±5% 12 100 3.5 4.5 0.20 0.11 600 MLG1608B10NJT
12 ±5% 12 100 3.0 3.8 0.25 0.13 600 MLG1608B12NJT
15 ±5% 12 100 2.8 3.6 0.28 0.14 600 MLG1608B15NJT
18 ±5% 12 100 2.6 3.3 0.32 0.16 600 MLG1608B18NJT
22 ±5% 12 100 2.3 3.0 0.35 0.19 500 MLG1608B22NJT
27 ±5% 12 100 2.0 2.7 0.40 0.21 500 MLG1608B27NJT
33 ±5% 12 100 1.8 2.3 0.50 0.25 500 MLG1608B33NJT
39 ±5% 12 100 1.6 2.0 0.55 0.26 400 MLG1608B39NJT
47 ±5% 14 100 1.4 1.8 0.60 0.35 400 MLG1608B47NJT
56 ±5% 14 100 1.2 1.8 0.70 0.41 400 MLG1608B56NJT
68 ±5% 14 100 1.1 1.6 0.75 0.43 300 MLG1608B68NJT
82 ±5% 14 100 1.0 1.4 0.80 0.50 300 MLG1608B82NJT
100 ±5% 14 100 0.80 1.2 1.00 0.64 300 MLG1608BR10JT
120 ±5% 14 100 0.65 0.8 1.20 0.89 300 MLG1608SR12JT
150 ±5% 14 100 0.55 0.7 1.30 1.03 250 MLG1608SR15JT
180 ±5% 14 100 0.50 0.6 1.40 1.08 250 MLG1608SR18JT
220 ±5% 14 100 0.45 0.6 1.70 1.29 200 MLG1608SR22JT
270 ±5% 14 100 0.35 0.5 2.00 1.59 200 MLG1608SR27JT
330 ±5% 10 50 0.35 0.47 2.80 1.90 100 MLG1608SR33JT
390 ±5% 10 50 0.30 0.43 3.00 2.06 100 MLG1608SR39JT
470 ±5% 10 50 0.25 0.39 3.50 2.47 100 MLG1608SR47JT
560 ±5% 10 50 0.25 0.36 4.50 3.20 70 MLG1608SR56JT
680 ±5% 10 50 0.20 0.31 5.50 3.88 70 MLG1608SR68JT
820 ±5% 10 50 0.15 0.22 5.50 3.76 70 MLG1608SR82JT
1000 ±5% 10 50 0.13 0.19 5.50 4.27 70 MLG1608S1R0JT
• All specifications are subject to change without notice.
(12/13)
001-07 / 20111129 / e521_mlg
L, Q vs. FREQUENCY CHARACTERISTICS
TYPICAL ELECTRICAL CHARACTERISTICS
INDUCTANCE vs. FREQUENCY CHARACTERISTICS Q vs. FREQUENCY CHARACTERISTICS
Part No. Inductance(nH)typ. Q typ.
500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz 500MHz 800MHz 1.8GHz 2.0GHz 2.4GHz
MLG1608B1N0ST 1.0 1.0 1.0 1.0 1.0 39 48 77 82 95
MLG1608B1N2ST 1.2 1.1 1.2 1.2 1.2 28 35 57 60 68
MLG1608B1N5ST 1.5 1.5 1.5 1.5 1.5 37 48 78 81 93
MLG1608B1N8ST 1.8 1.8 1.8 1.8 1.8 38 48 77 81 95
MLG1608B2N2ST 2.2 2.1 2.2 2.2 2.2 44 54 88 91 107
MLG1608B2N7ST 2.6 2.6 2.7 2.7 2.8 40 51 79 81 94
MLG1608B3N3ST 3.2 3.2 3.3 3.3 3.4 38 48 76 79 91
MLG1608B3N9ST 3.8 3.8 4.0 4.0 4.1 40 50 79 81 93
MLG1608B4N7ST 4.6 4.6 4.9 5.0 5.2 41 51 76 79 88
MLG1608B5N6DT 5.4 5.5 5.8 5.9 6.2 37 46 69 71 79
MLG1608B6N8DT 6.6 6.7 7.3 7.5 8.0 38 47 67 68 74
MLG1608B8N2DT 8.0 8.1 8.9 9.3 10 39 48 67 68 71
MLG1608B10NJT 9.8 10.0 11.5 12.1 13.6 38 47 63 63 61
MLG1608B12NJT 11.8 12.1 14.8 16.0 19.3 39 48 59 57 51
MLG1608B15NJT 14.8 15.4 20.6 23.4 38 46 49 46
MLG1608B18NJT 17.8 18.5 25.5 29.3 36 44 47 42
MLG1608B22NJT 21.9 22.9 33.6 40.2 36 44 43 38
MLG1608B27NJT 27.1 28.8 50.6 37 43 34
MLG1608B33NJT 33.4 36.0 37 43
MLG1608B39NJT 40.2 45.0 36 40
MLG1608B47NJT 49.1 56.0 38 41
MLG1608B56NJT 59.6 71.1 37 38
MLG1608B68NJT 74.0 92.8 34 33
MLG1608B82NJT 91.1 120.6 33 31
MLG1608BR10JT 118 35
MLG1608SR12JT 188 23
MLG1608SR15JT
MLG1608SR18JT
MLG1608SR22JT
MLG1608SR27JT
MLG1608SR33JT
MLG1608SR39JT
MLG1608SR47JT
MLG1608SR56JT
MLG1608SR68JT
MLG1608SR82JT
MLG1608S1R0JT
1
0
10
100
1000
10 100 1000 10000
Inductance(nH)
Frequency(MHz)
1
0
10
100
1000
10 100 1000 10000
Inductance(nH)
Frequency(MHz)
33nH
10nH
3.3nH
100nH
270nH
1.0nH
10 100 1000 10000
0
10
20
30
40
50
Q
Frequency(MHz)
33nH
10nH
3.3nH
100nH
270nH
1.0nH
• All specifications are subject to change without notice.
(13/13)
001-07 / 20111129 / e521_mlg
PACKAGING STYLES
REEL DIMENSIONS
TAPE DIMENSIONS
1.0
ø180±2.0
2.0±0.5
ø13±0.2
ø21±0.8
ø60min.
14.4max.
Dimensions in mm
8.4 +2.0
–0.0
8.0±0.3 3.5±0.05
1.9±0.2
1.75±0.1
1.1max. 1.1±0.2 4.0±0.1 4.0±0.1
2.0±0.05
1.5 +0.1
–0.0
Sprocket hole Cavity
160min. Taping 200min.
300min.
Drawing direction
Dimensions in mm
