INCH-POUND MS27484N w/AMENDMENT 1 15 November 2012 SUPERSEDING MS27484N 2 February 2012 DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, CRIMP TYPE, BAYONET COUPLING, EMI, SERIES II Reactivated after 24 May 2004 and may be used for new and existing designs and acquisitions. This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-38999. FIGURE 1. Plug, classes E, P and T. AMSC N/A FSC 5935 Source: http://assist.dla.mil -- Downloaded: 2021-02-08T11:18Z Check the source to verify that this is the current version before use. MS27484N w/AMENDMENT 1 Q dia max R dia +.005 -.006 8 .750 .316 .456 10 .859 .436 .573 1.031 .549 14 1.156 .675 .858 16 1.281 .799 .983 18 1.406 .893 1.108 20 1.531 1.018 1.641 1.143 1.766 1.268 Shell size 12 22 24 K max REF .155 .109 W .015 .547 FF max .036 JJ min .109 .524 MM dia +.007 -.004 .733 1.228 .017 .156 .575 FIGURE 1. Plug, classes E, P and T - Continued. 2 Source: http://assist.dla.mil -- Downloaded: 2021-02-08T11:18Z Check the source to verify that this is the current version before use. 1.353 1.478 MS27484N w/AMENDMENT 1 Shell size L (class E) max overall length L (class T) max overall length L (class P) max overall length 1.016 .766 1.020 1.094 .844 1.080 8 10 12 14 16 18 20 22 24 Inches .001 .004 .005 .006 .007 .010 .015 .017 .036 .109 .155 .156 mm 0.03 0.10 0.13 0.15 0.18 0.25 0.38 0.43 0.91 2.77 3.94 3.96 Inches .316 .391 .436 .456 .524 .547 .549 .573 .575 .675 .733 .750 mm 8.03 9.93 11.07 11.58 13.31 13.89 13.94 14.55 14.61 17.15 18.62 19.05 Inches .766 .799 .844 .858 .859 .893 .953 .983 1.018 1.020 1.031 1.080 mm 19.46 20.29 21.44 21.79 21.82 22.68 24.21 24.97 25.85 25.91 26.19 27.43 Inches 1.143 1.156 1.228 1.268 1.281 1.353 1.406 1.478 1.531 1.641 1.766 mm 29.03 29.36 31.19 32.21 32.54 34.37 35.71 37.54 38.89 41.68 44.86 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. For main key and key positions, see MIL-DTL-38999. 4. The gauge feature for GG shall be .004 inch (0.10 mm) larger than the MMC size at base location. 5. Design contour of cutouts optional. Cutouts to accommodate receptacle projections. 6 Applicable potting forms for class P: SAE-AS85049/58 and SAE-AS85049/75. FIGURE 1. Plug, classes E, P and T - Continued. 3 Source: http://assist.dla.mil -- Downloaded: 2021-02-08T11:18Z Check the source to verify that this is the current version before use. MS27484N w/AMENDMENT 1 REQUIREMENTS: Dimensions and configuration: See figure 1. Interface dimensions shall be in accordance with MIL-DTL-38999. Mating connectors: MIL-DTL-38999/10, MS27472, MS27474, MS27475, MS27476, MS27477, MS27478, MS27479, MS27480, MS27497, MS27499, MS27508 and MS27513. Procurement specification: MIL-DTL-38999. Insert arrangements: See MIL-STD-1560. For class E, compression nut in accordance with SAE-AS85049/27 shall be included. Part or Identifying Number (PIN) example: MS27484 T 12 F 98 P A MS number Class Shell size Finish Insert arrangement Contact style Polarizing positions No letter is required for normal. Restrictions. Class E is inactive for new design. Class P is inactive for new design for the Air Force. Finish F is not for Navy use. Finish F is inactive for new design for the Air Force. Amendment notations. The margins of this specification are marked with vertical lines to indicate modifications generated by this amendment. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations. 4 Source: http://assist.dla.mil -- Downloaded: 2021-02-08T11:18Z Check the source to verify that this is the current version before use. MS27484N w/AMENDMENT 1 Referenced documents. In addition to MIL-DTL-38999, this document references the following: MIL-DTL-38999/10 MIL-STD-1560 MS27472 MS27474 MS27475 MS27476 MS27477 MS27478 MS27479 MS27480 MS27497 MS27499 MS27508 MS27513 SAE-AS85049/27 SAE-AS85049/58 SAE-AS85049/75 CONCLUDING MATERIAL Custodians: Army - CR Navy - AS Air Force - 85 DLA - CC Preparing activity: DLA - CC (Project 5935-2012-219) Review activities: Army - AR, MI Navy - EC Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.dla.mil. 5 Source: http://assist.dla.mil -- Downloaded: 2021-02-08T11:18Z Check the source to verify that this is the current version before use.