Product family data sheet
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and
EasyWhite® are registered trademarks and the Cree logo and SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered
trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
WWW.CREE.COM/XLAMP
CLD-DS114 REV 1J
Cree® XLamp® XHP70 LEDs
PRODUCT DESCRIPTION
Powered by Crees groundbreaking SC5
Technology™ Platform, the XLamp XHP70
LED is a member of Crees Extreme High
Power (XHP) class of LEDs that redenes
lumen density and reliability to radically
reduce system costs by up to 40 percent.
At its maximum current, the XHP70 LED
delivers twice the light output of the XLamp
MK-R LED, with similar lumens per watt and
without increasing the package footprint.
The XHP70 LED also achieves longer
lifetime at higher operating temperatures
than previous LED technology. The result is
signicantly lower thermal, mechanical and
optical costs at the system level.
FEATURES
Available in white, congurable to 6V
or 12V by PCB layout
Available in 5-step EasyWhite® bins
at 3000K to 5000K CCT, 3-step
EasyWhite bins at 2700K to 5000K
and 2-step EasyWhite bins at 2700K
to 4000K CCT
Available in ANSI white bins at
3000K to 7000K CCT
Available in standard, 70-, 80-, and
90-minimum CRI options
Binned at 85°C
Maximum drive current: 4800mA
(6V), 2400mA (12V)
Low thermal resistance: 0.9°C/W
Wide viewing angle: 120°
Unlimited oor life at
≤ 30ºC/85% RH
Reow solderable - JEDEC
J-STD-020C
RoHS and REACh compliant
UL® recognized component
(E349212)
TABLE OF CONTENTS
Characteristics ..............................................2
Flux Characteristics, EasyWhite® Order
Codes and Bins .............................................3
Flux Characteristics, ANSI White Order
Codes and Bins .............................................6
Relative Spectral Power Distribution ...........9
Relative Flux vs. Junction Temperature .......9
Electrical Characteristics ........................... 10
Relative Flux vs. Current ............................ 11
Relative Chromaticity vs Current ............... 12
Relative Chromaticity vs Temperature ...... 13
Typical Spatial Distribution ........................ 13
Thermal Design .......................................... 14
Performance Groups – Luminous Flux..... 15
Performance Groups – Chromaticity ........ 15
Crees Standard White Chromaticity
Regions Plotted on the CIE 1931 Curve .... 19
Crees Standard Cool White Kits Plotted
on ANSI Standard Chromaticity Regions .. 22
Crees Standard Warm and Neutral White
Kits Plotted on ANSI Standard
Chromaticity Regions ................................ 23
Bin and Order-Code Format ....................... 24
Reow Soldering Characteristics .............. 25
Notes .......................................................... 26
Mechanical Dimensions ............................ 28
Electrical Conguration ............................. 30
Tape and Reel ............................................. 30
Packaging ................................................... 31
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp® XHp70 LED
CHARACTERISTICS
XHP70 LEDs are tested and binned in the 12-V conguration. See the Mechanical Dimensions section on page 23 for pad layout
options.
Characteristics Unit Minimum Typical Maximum
Thermal resistance, junction to solder point °C/W 0.9
Viewing angle (FWHM) degrees 120
Temperature coefcient of voltage (6V)* mV/°C -4.25
Temperature coefcient of voltage (12V) mV/°C -8.5
ESD withstand voltage (HBM per Mil-Std-883D) V 8000
DC forward current (6V)* mA 4800
DC forward current (12V) mA 2400
Reverse voltage V -5
Forward voltage (6V, @ 2100mA, 85°C)* V 5.8 6.2
Forward voltage (12V, @ 1050mA, 85°C) V11.6 12.4
LED junction temperature °C 150
Note:
* Data for the 6-V conguration is calculated and for reference only.
Notes
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
Cree XLamp XHP70 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp® XHp70 LED
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS
The following table provides order codes for XLamp XHP70 LEDs. For a complete description of how the ux and chromaticity groups are
reected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 24).
Binning condition: TJ = 85°C; 12V, IF = 1050mA
Reference condition: TJ = 85°C; 6V, IF = 2100mA
Nominal
CCT
CRI Minimum Luminous Flux 2-Step 3-Step 5-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C* Group Order Code Group Order Code Group Order Code
5000K
70
N4 1710 1965
50E
XHP70A-00-0000-
0D0BN450E
N2 1590 1827 XHP70A-00-0000-
0D0BN250E
80
N2 1590 1827
50G
XHP70A-00-0000-
0D0HN250G
M4 1485 1707 XHP70A-00-0000-
0D0HM450G
M2 1380 1586 XHP70A-00-0000-
0D0HM250G
90
K4 1290 1482
50G
XHP70A-00-0000-
0D0UK450G
K2 1200 1379 XHP70A-00-0000-
0D0UK250G
J4 1120 1287 XHP70A-00-0000-
0D0UJ450G
4500K
70
N2 1590 1827
45E
XHP70A-00-0000-
0D0BN245E
M4 1485 1707 XHP70A-00-0000-
0D0BM445E
80
M4 1485 1707
45G
XHP70A-00-0000-
0D0HM445G
M2 1380 1586 XHP70A-00-0000-
0D0HM245G
90
K4 1290 1482
45G
XHP70A-00-0000-
0D0UK445G
K2 1200 1379 XHP70A-00-0000-
0D0UK245G
J4 1120 1287 XHP70A-00-0000-
0D0UJ445G
Notes
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
Cree XLamp XHP70 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp® XHp70 LED
Nominal
CCT
CRI Minimum Luminous Flux 2-Step 3-Step 5-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C* Group Order Code Group Order Code Group Order Code
4000K
70
N2 1590 1827
40E
XHP70A-00-0000-
0D0BN240E
M4 1485 1707 XHP70A-00-0000-
0D0BM440E
80
M4 1485 1707
40H
XHP70A-00-0000-
0D0HM440H 40G
XHP70A-00-0000-
0D0HM440G
M2 1380 1586 XHP70A-00-0000-
0D0HM240H
XHP70A-00-0000-
0D0HM240G
90
K4 1290 1482
40H
XHP70A-00-0000-
0D0UK440H
40G
XHP70A-00-0000-
0D0UK40G
K2 1200 1379 XHP70A-00-0000-
0D0UK240H
XHP70A-00-0000-
0D0UK240G
J4 1120 1287 XHP70A-00-0000-
0D0UJ440H
XHP70A-00-0000-
0D0UJ440G
3500K
70
N2 1590 1827
35E
XHP70A-00-0000-
0D0BN235E
M4 1485 1707 XHP70A-00-0000-
0D0BM435E
80
M4 1485 1707
35H
XHP70A-00-0000-
0D0HM435H
35G
XHP70A-00-0000-
0D0HM435G
M2 1380 1586 XHP70A-00-0000-
0D0HM235H
XHP70A-00-0000-
0D0HM235G
K4 1290 1482 XHP70A-00-0000-
0D0HK435H
XHP70A-00-0000-
0D0HK435G
90
K4 1290 1482
35H
XHP70A-00-0000-
0D0UK435H
35G
XHP70A-00-0000-
0D0UK435G
K2 1200 1379 XHP70A-00-0000-
0D0UK235H
XHP70A-00-0000-
0D0UK235G
J4 1120 1287 XHP70A-00-0000-
0D0UJ435H
XHP70A-00-0000-
0D0UJ435G
J2 1040 1195 XHP70A-00-0000-
0D0UJ235H
XHP70A-00-0000-
0D0UJ235G
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - CONTINUED
Notes
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
Cree XLamp XHP70 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp® XHp70 LED
Nominal
CCT
CRI Minimum Luminous Flux 2-Step 3-Step 5-Step
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C* Group Order Code Group Order Code Group Order Code
3000K
70
M4 1485 1707
30E
XHP70A-00-0000-
0D0BM430E
M2 1380 1586 XHP70A-00-0000-
0D0BM230E
80
M4 1485 1707
30H
XHP70A-00-0000-
0D0HM430H
30G
XHP70A-00-0000-
0D0HM430G
M2 1380 1586 XHP70A-00-0000-
0D0HM230H
XHP70A-00-0000-
0D0HM230G
K4 1290 1482 XHP70A-00-0000-
0D0HK430H
XHP70A-00-0000-
0D0HK430G
90
K2 1200 1379
30H
XHP70A-00-0000-
0D0UK230H
30G
XHP70A-00-0000-
0D0UK230G
J4 1120 1287 XHP70A-00-0000-
0D0UJ430H
XHP70A-00-0000-
0D0UJ430G
J2 1040 1195 XHP70A-00-0000-
0D0UJ230H
XHP70A-00-0000-
0D0UJ230G
2700K
80
M2 1380 1586
27H
XHP70A-00-0000-
0D0HM227H
27G
XHP70A-00-0000-
0D0HM227G
K4 1290 1482 XHP70A-00-0000-
0D0HK427H
XHP70A-00-0000-
0D0HK427G
K2 1200 1379 XHP70A-00-0000-
0D0HK227H
XHP70A-00-0000-
0D0HK227G
90
J4 1120 1287
27H
XHP70A-00-0000-
0D0UJ427H
27G
XHP70A-00-0000-
0D0UJ427G
J2 1040 1195 XHP70A-00-0000-
0D0UJ227H
XHP70A-00-0000-
0D0UJ227G
H4 970 1115 XHP70A-00-0000-
0D0UH427H
XHP70A-00-0000-
0D0UH427G
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - CONTINUED
Notes
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
Cree XLamp XHP70 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp® XHp70 LED
FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS
The following table provides order codes for XLamp XHP70 LEDs. For a complete description of how the ux and chromaticity groups are
reected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 24).
Binning condition: TJ = 85°C; 12V, IF = 1050mA
Reference condition: TJ = 85°C; 6V, IF = 2100mA
Nominal
CCT Chromaticity Regions
CRI Minimum Luminous Flux
Order Code
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C*
7000K
0A, 0B, 0C, 0D,
0R, 0S, 0T, 0U,
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U
068 N4 1710 1965 XHP70A-00-0000-0D00N40DT
N2 1590 1827 XHP70A-00-0000-0D00N20DT
70 N4 1710 1965 XHP70A-00-0000-0D0BN40DT
N2 1590 1827 XHP70A-00-0000-0D0BN20DT
80 N2 1590 1827 XHP70A-00-0000-0D0HN20DT
M4 1485 1707 XHP70A-00-0000-0D0HM40DT
90
M2 1380 1586 XHP70A-00-0000-0D0UM20DT
K4 1290 1482 XHP70A-00-0000-0D0UK40DT
K2 1200 1379 XHP70A-00-0000-0D0UK20DT
6500K
0A, 0B, 0C, 0D,
0R, 0S, 0T, 0U,
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U,
2A, 2B, 2C, 2D,
2R, 2S, 2T, 2U
068 N4 1710 1965 XHP70A-00-0000-0D00N40CB
N2 1590 1827 XHP70A-00-0000-0D00N20CB
70 N4 1710 1965 XHP70A-00-0000-0D0BN40CB
N2 1590 1827 XHP70A-00-0000-0D0BN20CB
80 N2 1590 1827 XHP70A-00-0000-0D0HN20CB
M4 1485 1707 XHP70A-00-0000-0D0HM40CB
90
M2 1380 1586 XHP70A-00-0000-0D0UM20CB
K4 1290 1482 XHP70A-00-0000-0D0UK40CB
K2 1200 1379 XHP70A-00-0000-0D0UK20CB
6500K 1A, 1B, 1C, 1D
068 N4 1710 1965 XHP70A-00-0000-0D00N40E1
N2 1590 1827 XHP70A-00-0000-0D00N20E1
70 N4 1710 1965 XHP70A-00-0000-0D0BN40E1
N2 1590 1827 XHP70A-00-0000-0D0BN20E1
80 N2 1590 1827 XHP70A-00-0000-0D0HN20E1
M4 1485 1707 XHP70A-00-0000-0D0HM40E1
90
M2 1380 1586 XHP70A-00-0000-0D0UM20E1
K4 1290 1482 XHP70A-00-0000-0D0UK40E1
K2 1200 1379 XHP70A-00-0000-0D0UK20E1
Notes
Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI
measurements. See the Measurements section (page 26).
Cree XLamp XHP70 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25 °C are calculated and for reference only.
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp® XHp70 LED
Nominal
CCT Chromaticity Regions
CRI Minimum Luminous Flux
Order Code
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C*
6000K
1A, 1B, 1C, 1D,
1R, 1S, 1T, 1U,
2A, 2B, 2C, 2D,
2R, 2S, 2T, 2U
068 N4 1710 1965 XHP70A-00-0000-0D00N40DV
N2 1590 1827 XHP70A-00-0000-0D00N20DV
70 N4 1710 1965 XHP70A-00-0000-0D0BN40DV
N2 1590 1827 XHP70A-00-0000-0D0BN20DV
80 N2 1590 1827 XHP70A-00-0000-0D0HN20DV
M4 1485 1707 XHP70A-00-0000-0D0HM40DV
90
M2 1380 1586 XHP70A-00-0000-0D0UM20DV
K4 1290 1482 XHP70A-00-0000-0D0UK40DV
K2 1200 1379 XHP70A-00-0000-0D0UK20DV
5700K 2A, 2B, 2C, 2D
068 N4 1710 1965 XHP70A-00-0000-0D00N40E2
N2 1590 1827 XHP70A-00-0000-0D00N20E2
70 N4 1710 1965 XHP70A-00-0000-0D0BN40E2
N2 1590 1827 XHP70A-00-0000-0D0BN20E2
80 N2 1590 1827 XHP70A-00-0000-0D0HN20E2
M4 1485 1707 XHP70A-00-0000-0D0HM40E2
90
M2 1380 1586 XHP70A-00-0000-0D0UM20E2
K4 1290 1482 XHP70A-00-0000-0D0UK40E2
K2 1200 1379 XHP70A-00-0000-0D0UK20E2
5000K 3A, 3B, 3C, 3D
068 N4 1710 1965 XHP70A-00-0000-0D00N40E3
N2 1590 1827 XHP70A-00-0000-0D00N20E3
70 N4 1710 1965 XHP70A-00-0000-0D0BN40E3
N2 1590 1827 XHP70A-00-0000-0D0BN20E3
80
N2 1590 1827 XHP70A-00-0000-0D0HN20E3
M4 1485 1707 XHP70A-00-0000-0D0HM40E3
M2 1380 1586 XHP70A-00-0000-0D0HM20E3
90
K4 1290 1482 XHP70A-00-0000-0D0UK40E3
K2 1200 1379 XHP70A-00-0000-0D0UK20E3
J4 1120 1287 XHP70A-00-0000-0D0UJ40E3
4500K 4A, 4B, 4C, 4D
068 N2 1590 1827 XHP70A-00-0000-0D00N20E4
M4 1485 1707 XHP70A-00-0000-0D00M40E4
70 N2 1590 1827 XHP70A-00-0000-0D0BN20E4
M4 1485 1707 XHP70A-00-0000-0D0BM40E4
80 M4 1485 1707 XHP70A-00-0000-0D0HM40E4
M2 1380 1586 XHP70A-00-0000-0D0HM20E4
90
K4 1290 1482 XHP70A-00-0000-0D0UK40E4
K2 1200 1379 XHP70A-00-0000-0D0UK20E4
J4 1120 1287 XHP70A-00-0000-0D0UJ40E4
FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - CONTINUED
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp® XHp70 LED
Nominal
CCT Chromaticity Regions
CRI Minimum Luminous Flux
Order Code
Min Typ Group Flux (lm)
@ 85°C
Flux (lm)
@ 25°C*
4000K 5A, 5B, 5C, 5D
068 N2 1590 1827 XHP70A-00-0000-0D00N20E5
M4 1485 1707 XHP70A-00-0000-0D00M40E5
70 N2 1590 1827 XHP70A-00-0000-0D0BN20E5
M4 1485 1707 XHP70A-00-0000-0D0BM40E5
80 M4 1485 1707 XHP70A-00-0000-0D0HM40E5
M2 1380 1586 XHP70A-00-0000-0D0HM20E5
90
K4 1290 1482 XHP70A-00-0000-0D0UK40E5
K2 1200 1379 XHP70A-00-0000-0D0UK20E5
J4 1120 1287 XHP70A-00-0000-0D0UJ40E5
3500K 6A, 6B, 6C, 6D 70 N2 1590 1827 XHP70A-00-0000-0D0BN20E6
M4 1485 1707 XHP70A-00-0000-0D0BM40E6
3000K 7A, 7B, 7C, 7D 70 M4 1485 1707 XHP70A-00-0000-0D0BM40E7
M2 1380 1586 XHP70A-00-0000-0D0BM20E7
FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - CONTINUED
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp® XHp70 LED
RELATIVE SPECTRAL POWER DISTRIBUTION
RELATIVE FLUX VS. JUNCTION TEMPERATURE
Reference condition: 6V, IF = 2100mA; 12V, IF = 1050mA
Relative Spectral Power
0%
20%
40%
60%
80%
100%
380 430 480 530 580 630 680 730 780
Relative Radiant Power
Wavelength (nm)
6500 K, 68 CRI
3000 K, 80 CRI
Relative Flux Output vs. Junction Temperature
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp® XHp70 LED
ELECTRICAL CHARACTERISTICS (TJ = 85°C)
0
800
1600
2400
3200
4000
4800
5.50 5.75 6.00 6.25 6.50
Forward Current (mA)
Forward Voltage (V)
6 V
Electrical Characteristics (Tj = 85°C)
0
400
800
1200
1600
2000
2400
11.0 11.5 12.0 12.5 13.0
Forward Current (mA)
Forward Voltage (V)
12 V
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp® XHp70 LED
RELATIVE FLUX VS. CURRENT (TJ = 85°C)
0%
20%
40%
60%
80%
100%
120%
140%
160%
180%
200%
0800 1600 2400 3200 4000 4800
Relative Luminous Flux
Forward Current (mA)
6 V
Relative Intensity vs. Current (Tj = 85°C)
0%
20%
40%
60%
80%
100%
120%
140%
160%
180%
200%
0400 800 1200 1600 2000 2400
Relative Luminous Flux
Forward Current (mA)
12 V
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp® XHp70 LED
RELATIVE CHROMATICITY VS CURRENT (WARM WHITE)
-0.020
-0.016
-0.012
-0.008
-0.004
0.000
0.004
0.008
0.012
0.016
0.020
0800 1600 2400 3200 4000 4800
Current (mA)
ΔCCx
ΔCCy
6 V
Relative Chromaticity Vs. Current, WW
-0.020
-0.016
-0.012
-0.008
-0.004
0.000
0.004
0.008
0.012
0.016
0.020
0400 800 1200 1600 2000 2400
Current (mA)
ΔCCx
ΔCCy
12 V
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp® XHp70 LED
RELATIVE CHROMATICITY VS TEMPERATURE (WARM WHITE)
Reference condition: 6V, IF = 2100mA; 12V, IF = 1050mA
TYPICAL SPATIAL DISTRIBUTION
Reference condition: TJ = 85°C; 6V, IF = 2100mA; 12V, IF = 1050mA
Relative Chromaticity Vs. Temperature WW
-0.020
-0.016
-0.012
-0.008
-0.004
0.000
0.004
0.008
0.012
0.016
0.020
25 50 75 100 125 150
Tj (°C)
ΔCCx
ΔCCy
Typical Spatial Radiation Pattern
0%
20%
40%
60%
80%
100%
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity
Angle (º)
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLamp® XHp70 LED
THERMAL DESIGN
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
0
500
1000
1500
2000
2500
3000
3500
4000
4500
5000
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 1°C/W
Rj-a = 2°C/W
Rj-a = 3°C/W
Rj-a = 4°C/W
6 V
Thermal Design
0
250
500
750
1000
1250
1500
1750
2000
2250
2500
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 1°C/W
Rj-a = 2°C/W
Rj-a = 3°C/W
Rj-a = 4°C/W
12 V
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLamp® XHp70 LED
PERFORMANCE GROUPS LUMINOUS FLUX (TJ=85°C)
XLamp XHP70 LEDs are tested for luminous ux and placed into one of the following luminous-ux groups.
Group Code Minimum Luminous Flux Maximum Luminous Flux
H4 970 1040
J2 1040 1120
J4 1120 1200
K2 1200 1290
K4 1290 1380
M2 1380 1485
M4 1485 1590
N2 1590 1710
N4 1710 1830
P2 1830 1965
PERFORMANCE GROUPS CHROMATICITY
XLamp XHP70 LEDs are tested for chromaticity and placed into one of the regions dened by the following bounding coordinates.
EasyWhite Color Temperatures – 2-Step
Bin Code CCT x y
40H 4000K
0.3777 0.3739
0.3797 0.3816
0.3861 0.3855
0.3838 0.3777
35H 3500K
0.4022 0.3858
0.4053 0.3942
0.4125 0.3977
0.4091 0.3891
30H 3000K
0.4287 0.3975
0.4328 0.4064
0.4390 0.4086
0.4347 0.3996
27H 2700K
0.4524 0.4048
0.4574 0.4140
0.4633 0.4154
0.4581 0.4062
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLamp® XHp70 LED
PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)
EasyWhite Color Temperatures – 3-Step Ellipse
Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle
(°)
x y a b
50G 5000K 0.3447 0.3553 0.00840 0.00312 65.0
45G 4500K 0.3611 0.3658 0.00852 0.00330 61.5
40G 4000K 0.3818 0.3797 0.00939 0.00402 53.7
35G 3500K 0.4073 0.3917 0.00927 0.00414 54.0
30G 3000K 0.4338 0.4030 0.00834 0.00408 53.2
27G 2700K 0.4577 0.4099 0.00834 0.00420 48.5
EasyWhite Color Temperatures – 5-Step Ellipse
Bin Code CCT Center Point Major Axis Minor Axis Rotation Angle
(°)
x y a b
50E 5000K 0.3447 0.3553 0.01400 0.00520 65.0
45E 4500K 0.3611 0.3658 0.01420 0.00550 61.5
40E 4000K 0.3818 0.3797 0.01565 0.00670 53.7
35E 3500K 0.4073 0.3917 0.01545 0.00690 54.0
30E 3000K 0.4338 0.4030 0.01390 0.00680 53.2
ANSI White Bins ANSI White Bins ANSI White Bins
CCT Bin Code x y CCT Bin Code x y CCT Bin Code x y
7000 K
0A0
0.2950 0.2970
7000 K
0R0
0.2980 0.2880
7000 K
1A0
0.3048 0.3207
0.2920 0.3060 0.2950 0.2970 0.3130 0.3290
0.2984 0.3133 0.3009 0.3042 0.3144 0.3186
0.3009 0.3042 0.3037 0.2937 0.3068 0.3113
0B0
0.2920 0.3060
0S0
0.2895 0.3135
1B0
0.3028 0.3304
0.2895 0.3135 0.2870 0.3210 0.3115 0.3391
0.2962 0.3220 0.2937 0.3312 0.3130 0.3290
0.2984 0.3133 0.2962 0.3220 0.3048 0.3207
0C0
0.2984 0.3133
0T0
0.2962 0.3220
1C0
0.3115 0.3391
0.2962 0.3220 0.2937 0.3312 0.3205 0.3481
0.3028 0.3304 0.3005 0.3415 0.3213 0.3373
0.3048 0.3207 0.3028 0.3304 0.3130 0.3290
0D0
0.2984 0.3133
0U0
0.3037 0.2937
1D0
0.3130 0.3290
0.3048 0.3207 0.3009 0.3042 0.3213 0.3373
0.3068 0.3113 0.3068 0.3113 0.3221 0.3261
0.3009 0.3042 0.3093 0.2993 0.3144 0.3186
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLamp® XHp70 LED
PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)
ANSI White Bins ANSI White Bins ANSI White Bins
CCT Bin Code x y CCT Bin Code x y CCT Bin Code x y
7000 K
1R0
0.3068 0.3113
6000K
2A0
0.3215 0.3350
6000K
2R0
0.3222 0.3243
0.3144 0.3186 0.3290 0.3417 0.3290 0.3300
0.3161 0.3059 0.3290 0.3300 0.3290 0.3180
0.3093 0.2993 0.3222 0.3243 0.3231 0.3120
1S0
0.3005 0.3415
2B0
0.3207 0.3462
2S0
0.3196 0.3602
0.3099 0.3509 0.3290 0.3538 0.3290 0.3690
0.3115 0.3391 0.3290 0.3417 0.3290 0.3538
0.3028 0.3304 0.3215 0.3350 0.3207 0.3462
1T0
0.3099 0.3509
2C0
0.3290 0.3538
2T0
0.3290 0.3690
0.3196 0.3602 0.3376 0.3616 0.3381 0.3762
0.3205 0.3481 0.3371 0.3490 0.3376 0.3616
0.3115 0.3391 0.3290 0.3417 0.3290 0.3538
1U0
0.3144 0.3186
2D0
0.3290 0.3417
2U0
0.3290 0.3300
0.3221 0.3261 0.3371 0.3490 0.3366 0.3369
0.3231 0.3120 0.3366 0.3369 0.3361 0.3245
0.3161 0.3059 0.3290 0.3300 0.3290 0.3180
ANSI White Bins ANSI White Bins
CCT Bin Code x y CCT Bin Code x y
5000K
3A0
0.3371 0.3490
4500K
4A0
0.3530 0.3597
0.3451 0.3554 0.3615 0.3659
0.3440 0.3427 0.3512 0.3465
0.3366 0.3369 0.3515 0.3487
3B0
0.3376 0.3616
4B0
0.3548 0.3736
0.3463 0.3687 0.3641 0.3804
0.3451 0.3554 0.3530 0.3597
0.3371 0.3490 0.3533 0.362
3C0
0.3463 0.3687
4C0
0.3641 0.3804
0.3551 0.3760 0.3736 0.3874
0.3533 0.3620 0.3702 0.3722
0.3451 0.3554 0.3615 0.3659
3D0
0.3451 0.3554
4D0
0.3615 0.3659
0.3533 0.3620 0.3702 0.3722
0.3515 0.3487 0.3670 0.3578
0.3440 0.3427 0.3590 0.3521
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLamp® XHp70 LED
PERFORMANCE GROUPS – CHROMATICITY (CONTINUED)
ANSI White Bins ANSI White Bins ANSI White Bins
CCT Bin Code x y CCT Bin Code x y CCT Bin Code x y
4000K
5A0
0.3670 0.3578
3500K
6A0
0.3889 0.3690
3000K
7A0
0.4147 0.3814
0.3702 0.3722 0.3941 0.3848 0.4221 0.3984
0.3825 0.3798 0.4080 0.3916 0.4342 0.4028
0.3783 0.3646 0.4017 0.3751 0.4259 0.3853
5B0
0.3702 0.3722
6B0
0.3941 0.3848
7B0
0.4221 0.3984
0.3736 0.3874 0.3996 0.4015 0.4299 0.4165
0.3869 0.3958 0.4146 0.4089 0.4430 0.4212
0.3825 0.3798 0.4080 0.3916 0.4342 0.4028
5C0
0.3825 0.3798
6C0
0.4080 0.3916
7C0
0.4342 0.4028
0.3869 0.3958 0.4146 0.4089 0.4430 0.4212
0.4006 0.4044 0.4299 0.4165 0.4562 0.4260
0.3950 0.3875 0.4221 0.3984 0.4465 0.4071
5D0
0.3783 0.3646
6D0
0.4017 0.3751
7D0
0.4259 0.3853
0.3825 0.3798 0.4080 0.3916 0.4342 0.4028
0.3950 0.3875 0.4221 0.3984 0.4465 0.4071
0.3898 0.3716 0.4147 0.3814 0.4373 0.3893
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
19
XLamp® XHp70 LED
CREE’S STANDARD WHITE CHROMATICITY REGIONS PLOTTED ON THE CIE 1931 CURVE
ANSI Cool White
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
20
XLamp® XHp70 LED
CREE’S STANDARD WHITE CHROMATICITY REGIONS PLOTTED ON THE CIE 1931 CURVE - CONTINUED
ANSI Neutral White and ANSI Warm White
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
5700 K
3A
3B
3C
3D
4A
4B
4C
4D
5A
5B
5C
5D
6A
6B
6C
6D
7A
7B
7C
7D
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
CCy
CCx
ANSI
C78.377A
0.49
0.50
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
21
XLamp® XHp70 LED
CREE’S STANDARD WHITE CHROMATICITY REGIONS PLOTTED ON THE CIE 1931 CURVE - CONTINUED
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
5700 K
6500 K
8000 K
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.27
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI C78.377 Quadrangle
EasyWhite 5-Step
EasyWhite 3-Step
EasyWhite 2-Step
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
22
XLamp® XHp70 LED
CREE’S STANDARD COOL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
1R
1S
1T
1U
2R
2S
2T
2U
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
CB
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
1R
1S
1T
1U
2R
2S
2T
2U
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
DT
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
1R
1S
1T
1U
2R
2S
2T
2U
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
DV
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
E1
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
E2
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
23
XLamp® XHp70 LED
CREE’S STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D
5A
5B
5C
5D
6A
6B
6C
6D
7A
7B
7C
7D
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
0.50
CCy
CCx
E3
E4
E5
E6
E7
ANSI
C78.377A
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
24
XLamp® XHp70 LED
BIN AND ORDER-CODE FORMAT
Bin codes and order codes for XHP70 LEDs are congured in the following manner:
Bin Code
Order Code
SSSSSS-E-NNN-MMM-JK-L-PP
Series
XHP70A = XHP70
Chromaticity group
Vf Class
D = 6-V/12-V configurable
CRI specification
0 = No minimum CRI
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
Internal code
Voltage performance group
Luminous flux group
Internal code
SSSSSS-BD-GGGG-HJKLMMNNN
Series
XHP70A = XHP70
Internal code
Minimum luminous flux group
Chromaticity group
CRI specification
0 = No minimum CRI
B = 70 CRI minimum
H = 80 CRI minimum
U = 90 CRI minimum
Vf Class
D = 6-V/12-V configurable
Configuration
B = Internal code
D = Reel size
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
25
XLamp® XHp70 LED
REFLOW SOLDERING CHARACTERISTICS
In testing, Cree has found XLamp XHP70 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering prole provided by the manufacturer of the solder paste used,
and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and congurations of reow soldering equipment.
Profile Feature Lead-Free Solder
Average Ramp-Up Rate (Tsmax to Tp)1.2°C/second
Preheat: Temperature Min (Tsmin) 120 °C
Preheat: Temperature Max (Tsmax)170 °C
Preheat: Time (tsmin to tsmax)65-150 seconds
Time Maintained Above: Temperature (TL)217 °C
Time Maintained Above: Time (tL) 45-90 seconds
Peak/Classication Temperature (Tp) 235 - 245 °C
Time Within 5°C of Actual Peak Temperature (tp) 20-40 seconds
Ramp-Down Rate 1 - 6 °C/second
Time 25°C to Peak Temperature 4 minutes max.
Note: All temperatures refer to the topside of the package, measured on the package body surface.
TP
TL
Temperature
Time
t 25˚C to Peak
Preheat
ts
tS
tP
25
Ramp-down
Ramp-up
Critical Zone
TL to TP
Tsmax
Tsmin
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
26
XLamp® XHp70 LED
NOTES
Measurements
The luminous ux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Crees control and are not intended or provided as operational specications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specications.
Pre‑Release Qualication Testing
Please read the LED Reliability Overview for details of the qualication process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Crees pre-release qualication testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specic LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Crees lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XHP70 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited oor life in
conditions of 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Ecology section of the Cree website.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
27
XLamp® XHp70 LED
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a re and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
NOTES - CONTINUED
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
28
XLamp® XHp70 LED
MECHANICAL DIMENSIONS
Thermal vias, if present, are not shown on these drawings.
All dimensions are ±.13mm unless otherwise indicated.
Side View
Top View
7.00
7.00
.73
R3.76
4.49
3.90
.70
6.70
.70
6.76
3.13
.50
3.90
6.70
.70
.70
6.76
.70
6.70
.70
.70
6.76.50
3.13
3.13
.50
.70
.70
6.76
.50
.70
1.24
.25
.70
6.70
1.29
1.29
.25
3.13
6.70 REF.
6.76 REF.
RECOMMENDED PCB SOLDER PAD
6v
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
6v/12v
RECOMMENDED PCB SOLDER PAD
12v
PRIMARY ALTERNATIVE
7.00
7.00
.73
R3.76
4.49
3.90
.70
6.70
.70
6.76
3.13
.50
3.90
6.70
.70
.70
6.76
.70
6.70
.70
.70
6.76.50
3.13
3.13
.50
.70
.70
6.76
.50
.70
1.24
.25
.70
6.70
1.29
1.29
.25
3.13
6.70 REF.
6.76 REF.
RECOMMENDED PCB SOLDER PAD
6v
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
6v/12v
RECOMMENDED PCB SOLDER PAD
12v
PRIMARY ALTERNATIVE
Cathode
Side
7.00
7.00
.73
R3.76
4.49
3.90
.70
6.70
.70
6.76
3.13
.50
3.90
6.70
.70
.70
6.76
.70
6.70
.70
.70
6.76.50
3.13
3.13
.50
.70
.70
6.76
.50
.70
1.24
.25
.70
6.70
1.29
1.29
.25
3.13
6.70 REF.
6.76 REF.
RECOMMENDED PCB SOLDER PAD
6v
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
6v/12v
RECOMMENDED PCB SOLDER PAD
12v
PRIMARY ALTERNATIVE
7.00
7.00
.73
R3.76
4.49
3.90
.70
6.70
.70
6.76
3.13
.50
3.90
6.70
.70
.70
6.76
.70
6.70
.70
.70
6.76.50
3.13
3.13
.50
.70
.70
6.76
.50
.70
1.24
.25
.70
6.70
1.29
1.29
.25
3.13
6.70 REF.
6.76 REF.
RECOMMENDED PCB SOLDER PAD
6v
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
6v/12v
RECOMMENDED PCB SOLDER PAD
12v
PRIMARY ALTERNATIVE
Bottom View Alternate Bottom View
As shown in these bottom views, thermal
pad is electrically isloated
Anode
Side
Cathode
Side
Anode
Side
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
29
XLamp® XHp70 LED
MECHANICAL DIMENSIONS - CONTINUED
7.00
7.00
.73
R3.76
4.49
3.90
.70
6.70
.70
6.76
3.13
.50
3.90
6.70
.70
.70
6.76
.70
6.70
.70
.70
6.76.50
3.13
3.13
.50
.70
.70
6.76
.50
.70
1.24
.25
.70
6.70
1.29
1.29
.25
3.13
6.70 REF.
6.76 REF.
RECOMMENDED PCB SOLDER PAD
6v
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
6v/12v
RECOMMENDED PCB SOLDER PAD
12v
PRIMARY ALTERNATIVE
7.00
7.00
.73
R3.76
4.49
3.90
.70
6.70
.70
6.76
3.13
.50
3.90
6.70
.70
.70
6.76
.70
6.70
.70
.70
6.76.50
3.13
3.13
.50
.70
.70
6.76
.50
.70
1.24
.25
.70
6.70
1.29
1.29
.25
3.13
6.70 REF.
6.76 REF.
RECOMMENDED PCB SOLDER PAD
6v
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
6v/12v
RECOMMENDED PCB SOLDER PAD
12v
PRIMARY ALTERNATIVE
Recommended PCB Solder Pad 6V Conguration
(thermal pad is electrically isolated)
Recommended PCB Solder Pad 12V Conguration
(thermal pad is connected to anode and cathode and is
not electrically isolated)
Recommended Stencil Pattern
6V & 12V Congurations
(shaded area is open)
7.00
7.00
.73
R3.76
4.49
3.90
.70
6.70
.70
6.76
3.13
.50
3.90
6.70
.70
.70
6.76
.70
6.70
.70
.70
6.76.50
3.13
3.13
.50
.70
.70
6.76
.50
.70
1.24
.25
.70
6.70
1.29
1.29
.25
3.13
6.70 REF.
6.76 REF.
RECOMMENDED PCB SOLDER PAD
6v
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
6v/12v
RECOMMENDED PCB SOLDER PAD
12v
PRIMARY ALTERNATIVE
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
30
XLamp® XHp70 LED
ELECTRICAL CONFIGURATION
NEGATIVE A
NEGATIVE B
POSITIVE A
POSITIVE A
12 V
6 V
NEGATIVE B POSITIVE B
SOLDER PAD LINK
NEGATIVE A
NEGATIVE B
POSITIVE A
POSITIVE A
12 V
6 V
NEGATIVE B POSITIVE B
SOLDER PAD LINK
6-V Conguration 12-V Conguration
TAPE AND REEL
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
All dimensions are ±.13mm unless otherwise indicated.
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
Trailer
180mm (min) of
empty pockets
sealed with tape
(100 pockets min.)
Loaded Pockets
(1000Lamps)
12±.1
4.6
16
+.3
-.0
1.75
±.10
4±.10
Leader
420mm (min) of
empty pockets
sealed with tape
(40 pockets min.)
7.4
0.36
"13
13mm
1/13.000
B
2402-00056
XHP70 LOADING SPEC
--
--
----
----
12/9/14D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
B REVERSED POLARITY IN VIEW DC 1/6/15
END START
User Feed Direction
CATHODE SIDE
ANODE SIDE
User Feed Direction
1.5± .1
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
± .5 °
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
± .5 °
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
Trailer
180mm (min) of
empty pockets
sealed with tape
(100 pockets min.)
Loaded Pockets
(1000Lamps)
12±.1
4.6
16
+.3
-.0
1.75
±.10
4±.10
Leader
420mm (min) of
empty pockets
sealed with tape
(40 pockets min.)
7.4
0.36
"13
13mm
1/13.000
B
2402-00056
XHP70 LOADING SPEC
--
--
----
----
12/9/14D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
B REVERSED POLARITY IN VIEW DC 1/6/15
END START
User Feed Direction
CATHODE SIDE
ANODE SIDE
User Feed Direction
1.5± .1
Copyright © 2014-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, XLamp® and EasyWhite® are registered trademarks and the Cree logo and
SC5 Technology™ are trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
31
XLamp® XHp70 LED
PACKAGING
Label with Cree Bin
Code, Qty, Lot # Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Dessicant
(inside bag)
Humidity Indicator
Card (inside bag)
Patent Label
Label with Customer Order
Code, Qty, Reel ID, PO #
Patent Label
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Unpackaged Reel
Packaged Reel
Boxed Reel
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Cree, Inc.:
XHP70A-01-0000-0D0BN20E1 XHP70A-00-0000-0D0UK230H XHP70A-00-0000-0D0HM227H XHP70A-00-0000-
0D0UJ427G XHP70A-00-0000-0D0UK440H XHP70A-00-0000-0D0UK235G XHP70A-00-0000-0D0UK40E5 XHP70A-
00-0000-0D0HM227G XHP70A-00-0000-0D0HM430H XHP70A-00-0000-0D0HM430G XHP70A-00-0000-0D0UK40E3
XHP70A-00-0000-0D0UJ427H XHP70A-00-0000-0D0UK235H XHP70A-00-0000-0D0UK40E4 XHP70A-00-0000-
0D0UK230G XHP70A-00-0000-0D0UM20E2 XHP70A-00-0000-0D0UK445G XHP70A-00-0000-0D0UM20DV
XHP70A-00-0000-0D0UM20DT XHP70A-00-0000-0D0UK440G XHP70A-00-0000-0D0UK435G XHP70A-00-0000-
0D0UM20E1 XHP70A-00-0000-0D0UM20CB XHP70A-00-0000-0D0UK450G XHP70A-00-0000-0D0UK435H