THIRD ANGLE PROJ.
DATEDESCRIPTIONREV
REVISIONS
ECO APPR
CAD FILE REV
DWG SIZE
UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES AND TOLERANCES ARE:
3 PLACE DECIMAL2 PLACE DECIMAL ANGLES
REF1.630
0.060
0.220 0.230 0.255
0.258
REF0.482
.900 MAX
"
ACROSS FLATS
3/8
0.840
0.620
-- RELEASE TO MFG. -- -- --
G REDRAWN IN PRO-E & COD SHEET ADDED 22-Sep-15 50266 AAP
H INSULATOR MATERIAL PTFE WAS ERROR 25-Oct-16 2241 VK
H
B
REFERENCE
EAR # AND DOR 25-21241
CONFIGURATION LEVEL: In Work
NOTICE - These drawings, specifications, or other data (1) are, and remain the
property of Amphenol corp. (2) must be returned upon request; and (3) are
confidential and not to be disclosed to any person other than those to whom they
are given by Amphenol Corp. the furnishing of these drawings, specifications, or
other data by Amphenol Corp., or to any other person to anyone for any purpose is
not to be regarded by implication or otherwise in any manner licensing, granting
rights to permitting such holder or any other person to manufacture, use or sell any
product, process or design, patented or otherwise, that may in any way be related to
or disclosed by said drawings, specifications, or other data.
SHEET 2 OF 2
SCALE: 4.5:1.025-Oct-16 K.CAPOZZI
TITLE
HN STR PLUG FOR
RG 54/U CABLE
DATEAPPROVED
Amphenol RF
www.amphenolrf.com
DATE
07-Jan-81
ENGINEER
D.CRITELLI
MATERIAL
SEE NOTES
DATE
12-Nov-14
DRAWN
A ARUN PRABU
FINISH
DRAWING NO. 82-816-1000
ITEM NO. 82-816-1000
PART NO. 82-816-1000
NOTES:
1. MATERIALS AND FINISHES:
BODY, CLAMP NUTS, WASHER, CONTACT,
RETAINING RING & COUPLING NUT - BRASS, SILVER PLATING
GASKET - SILICONE RUBBER, RED
GASKET - SYNTHETIC RUBBER,RED
INSULATOR - CROSS-LINKED COPOLYMER OF STYRENE, NATURAL
2. ELECTRICAL:
A. IMPEDANCE: 50 OHM
3. MECHANICAL:
A. DURABILITY: 500 CYCLES MIN.
B. TEMPERATURE RANGE: -65$ C TO +165$ C
4. PACKAGING:
A. QUANTITY: SINGLE PACK
B. MARKING: BAG TO BE MARKED
"AMPHENOL RF, 82-816-1000 , AND DATE CODE"
5. RECOMMENDED CABLE ASSEMBLY INSTRUCTIONS:
A. TRIM CABLE AS SHOWN.
B. SOLDER CABLE CENTER CONDUCTOR TO CONTACT.
C. CENTER CONDUCTOR TO BE BENT DOUBLE PRIOR TO SOLDERING CONTACT.
D. SLIDE CLAMP NUT, GASKET, WASHER & CLAMP NUT OVER THE CABLE.
E. SLIDE SUB-ASSEMBLY TO THE REAR SIDE OF THE BODY AND TIGHTEN WITH SPANNER.
6. RECOMMENDED CLAMP NUT TORQUE : 35-40 IN-LBS.
7. SHOWS CABLE ENTRY DIMENSIONS.
SCALE 1.400
INTERFACE PER
SERIES : HN PLUG
CONTACT
CLAMP NUT GASKET WASHER
CLAMP NUT
3/8-32UNEF-2A THREAD
SAFEFTY WIRE HOLES
120$ APART
TYP(3)
3/8-32UNEF-2B THREAD
3/8" HEX
RECOMMENDED CABLE
STRIPPING DIMENSIONS
CUSTOMER OUTLINE DRAWING
ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY
7
7
77
7
