HER201 THRU HER208 HIGH EFFICIENCY RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 2.0 Amperes FEATURES * * * * * * * Low power loss,high efficiency Low leakage Low forward voltage drop High current capability High speed switching High reliability High current surge DO-15 MECHANICAL DATA * * * * * Epoxy: Device has UL flammability classification 94V-O Case: Molded plastic Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.4 gram .034 (0.9) 1.0 (25.4) .028 (0.7) DIA. MIN. .300 (7.6) .230 (5.8) .140 (3.6) .104 (2.6) DIA. 1.0 (25.4) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS MIN. Ratings at 25 o C ambient temperature unless otherwise specified. resistive or inductive load. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL HER201 HER202 HER206 HER207 Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 300 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 210 280 420 560 700 Volts VDC 50 100 200 300 400 600 800 1000 Volts RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 50 OC HER203 HER204 HER205 HER208 UNITS IO 2.0 Amps I FSM 60 Amps 2 I T 14.9 Typical Thermal Resistance (Note 1) RqJL 10 0 Typical Thermal Resistance (Note 1) RqJC 15 0 Typical Thermal Resistance (Note 1) RqJA Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squared Time A 2S 0 40 C/W C/W C/W Typical Junction Capacitance (Note 2) CJ Operating Temperature Range TJ 150 0 C T STG -55 to + 150 0 C Storage Temperature Range 30 20 pF ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 2.0A DC Maximum Full Load Reverse Current, Full cycle Average T L =55 OC Maximum Average Reverse Current @T A = 25 o C at Rated DC Blocking Voltage @T A = 100 o C Maximum Reverse Recovery Time (Note 4) VF HER201 HER202 HER203 1.0 HER204 HER205 1.3 HER206 HER207 1.7 mA 5 mA mA 100 NOTES : 1. Thermal Resistance : At 9.5mm lead length,PCB mounted. 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 3. "Fully ROHS compliant", "100% Sn plating (Pb-free)". 4. Test Conditions: IF= 0.5A, IR= -1.0A, IRR= -0.25A. 5. Available in Halogen-free epoxy by adding suffix -HF after the part nbr. 50 Volts 100 IR trr HER208 UNITS 75 nSec 2011-03 REV:B RATING AND CHARACTERISTICS CURVES ( HER201 THRU HER208 ) 50 W NONINDUCTIVE (+) 25 Vdc (approx) (-) (-) D.U.T PULSE GENERATOR (NOTE 2) 1 NONINDUCTIVE trr +0.5A 10 W NONINDUCTIVE OSCILLOSCOPE (NOTE 1) 0 -0.25A (+) NOTES: 1 Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF. -1.0A 2. Rise Time = 10ns max. Source Impedance = 50 ohms. 1cm SET TIME BASE FOR 20/1 ns/cm AVERAGE FORWARD CURRENT, (A) 2.0 1.6 1.2 0.8 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.4 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE, (OC) FIG.2 TYPICAL FORWARD CURRENT DERATING CURVE 175 INSTANTANEOUS REVERSE CURRENT, (uA) FIG.1 TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 1000 100 TA = 100 OC TA = 75 OC 10 TA = 25 OC 1.0 0.1 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.3 TYPICAL REVERSE CHARACTERISTICS 140 PEAK FORWARD SURGE CURRENT, (A) 20 10 TJ = 25 OC 3.0 HER206~HER208 1.0 0.3 HER204~HER205 0.1 HER201~HER203 0.03 0.01 Pulse Width=300uS 1% Duty Cycle 0 0.5 1.0 1.5 2.0 2.5 3.0 200 8.3ms Single Half Sine-Wave (JEDED Method) 150 125 100 3.5 50 30 20 10 1 5 INSTANTANEOUS FORWARD VOLTAGE, (V) 10 TJ = 25 OC 100 HER201~HER205 40 20 10 HER206~HER208 6 4 2 1 0.1 0.2 100 FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 200 60 50 NUMBER OF CYCLES AT 60Hz FIG.4 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS JUNCTION CAPACITANCE, (pF) INSTANTANEOUS FORWARD CURRENT, (A) RATING AND CHARACTERISTICS CURVES ( HER201 THRU HER208 ) 0.4 1.0 2 4 10 20 40 REVERSE VOLTAGE, (V) FIG.6 TYPICAL JUNCTION CAPACITANCE 100 THE MARKING OF HER20X Marking Description: Cathode band Logo Part No. V X X HER20X Month Code Year Code Marking Description Cathode Band Rectron Logo Part No. Year - code: (Y:Last digit of year) V Y M H E R 2 0 X Month - code: (M:0~9,O,N,D) Voltage-code 1-------50V 2-------100V 3-------200V 4-------300V 5------400V 6-------600V 7-------800V 8-------1000V PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK PACKAGE PACKING CODE DO-15 -B EA PER BOX INNER BOX SIZE CARTON SIZE EA PER CARTON (mm) (mm) 500 194*84*21 450*220*255 25,000 GROSS WEIGHT(Kg) 12.74 REEL PACK PACKAGE DO-15 PACKING EA PER REEL CODE -T 4,000 COMPONENT TAPE SPACE SPACE(mm) (mm) 5.0 52 REEL DIA (mm) CARTON SIZE EA PER GROSS CARTON WEIGHT(Kg) (mm) 330 355*350*335 16,000 10.05 BOX SIZE (mm) CARTON SIZE(mm) CARTON ( EA ) GROSS WEIGHT (Kg) 255*73*100 400*268*225 15,000 8.8 AMMO PACK PACKAGE PACKING CODE REEL ( EA ) DO-15 -F 1,500 COMPONENT TAPE SPACE SPACE(mm) (mm) 5.0 52 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.