MANUFACTURER CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS REV.DATE
ECLIPTEK CORP. OSCILLATOR EP15E7 CERAMIC 2.5V OS5N 10/07
EP15E7 Series
OSCILLATOR
EP15E7
ELECTRICAL SPECIFICATIONS
800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.
• RoHS Compliant (Pb-Free)
• EPO™ Programmable Oscillators
• Ceramic Surface Mount Package
• LVHCMOS Output
• 2.5V Supply Voltage
• Stability to ±25ppm
• Available on Tape & Reel
• Tri-State and Power Down Funtions Available
H 1.05
L 3.2
W 2.5
-20°C to 70°C or -40°C to 85°C
-55°C to 125°C
2.5VDC ±5%
10mA Maximum
12mA Maximum
14mA Maximum
17mA Maximum
±25ppm, 50ppm or ±100ppm Maximum
90% of VDD Minimum
10% of VDD Maximum
6nSeconds Maximum
4nSeconds Maximum
2nSeconds Maximum
50 ±5(%)
30pF HCMOS Load Maximum
15pF HCMOS Load Maximum
Tri-State or Power Down
Enables Output
Enables Output
Disables Output
30μA Maximum
6mA Maximum
350pSec Maximum
200pSec Maximum
±5ppm/Year Maximum
10mSec Maximum
Nominal Frequency
Operating Temperature Range
Storage Temperature Range
Supply Voltage (VDD)
Input Current
Frequency Tolerance / Stability
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time
Duty Cycle
Load Drive Capability
Pad 1 Connection
Pad 1 Input Voltage
Standby Current
Disable Current
Absolute Clock Jitter
Aging at 25°
Start Up Time
3.300MHz to 25.000MHz
25.001MHz to 50.000MHz
50.001MHz to 75.000MHz
75.001MHz to 88.000MHz
Inclusive of All Conditions: Calibration Tolerance at 25°C ,
Frequency Stability over the Operating Temperature Range,
Supply Voltage Change, Output Load Change, 1st Year
Aging at 25°C, 260°C Reflow, Shock, and Vibration
IOH = -8mA
IOL = +8mA
3.300MHz to 50.000MHz, 20% to 80% of waveform
50.001MHz to 75.000MHz, 20% to 80% of waveform
75.001MHz to 88.000MHz, 20% to 80% of waveform
at 50% of waveform
3.300MHz to 50.000MHz
50.001MHz to 88.000MHz
VIH of 90% of VDD Minimum
No Connection
VIL of 10% of VDD Maximum
Disabled Output (Logic Low)
Disabled Output (High Impedance)
3.300MHz to 24.999999MHz
25.000MHz to 88.000MHz
3.300MHz, 3.6864MHz, 5.000MHz, 6.000MHz, 7.000MHz, 8.000MHz, 9.000MHz, 10.000MHz,
12.000MHz, 16.000MHz , 20.000MHz, 24.000MHz, 25.000MHz, 26.000MHz, 27.000MHz, 30.000MHz,
33.000MHz, 33.333MHz, 37.500MHz, 40.000MHz, 52.000MHz, 66.000MHz, 70.000MHz, 75.000MHz,
80.000MHz, 83.000MHz, and 88.000MHz
MANUFACTURER CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS REV.DATE
ECLIPTEK CORP. OSCILLATOR EP15E7 CERAMIC 2.5V OS5N 10/07
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.
EP15E7 H 2 H - 40.000M TR
PART NUMBERING GUIDE
AVAILABLE OPTIONS
Blank=Bulk
TR=Tape and Reel (Standard)
FREQUENCY
LOGIC CONTROL/ADDITIONAL OUTPUT
H=Tri-State
J=Power Down
FREQUENCY TOLERANCE & STABILITY/
OPERATING TEMPERATURE RANGE
C=±100ppm Maximum over -20°C to +70°C
D=±50ppm Maximum over -20°C to +70°C
E=±25ppm Maximum over -20°C to +70°C
G=±100ppm Maximum over -40°C to +85°C
H=±50ppm Maximum over -40°C to +85°C
DUTY CYCLE
2=50% ±5%
*Compliant to EIA 481C
Tolerances= +0.1
Characteristic Specification
ESD Susceptibility MIL-STD-883, Method 3015, Class 1, HBM: 1500Vdc
Fine Leak Test MIL-STD-883, Method 1014, Condition A
Gross Leak Test MIL-STD-883, Method 1014, Condition C
Mechanical Shock MIL-STD-883, Method 2002, Condition B
Moisture Resistance MIL-STD-883, Method 1004
Moisture Sensitivity J-STD-020, MSL 1
Resistance to Soldering Heat MIL-STD-202, Method 210, Condition K
Resistance to Solvents MIL-STD-202, Method 215
Solderability MIL-STD-883, Method 2003
Temperature Cycling MIL-STD-883, Method 1010, Condition B
Thermal Shock MIL-STD-883, Method 1011, Condition B
Vibration MIL-STD-883, Method 2007, Condition A
Pin 1: Tri-State or Power Down
Pin 2: Case Ground
Pin 3: Output
Pin 4: Supply Voltage
A B C D E F
12.0 ±0.3 5.5 ±0.05 4.75 ±0.1 4.0 ±0.1 2.00 ±0.05
F G H J K L
4.0 ±0.1 A0* 1.5 +.1/-0 B0* 0.6 MAX K0*
M N O P Q
1.5 MIN 50 MIN 20.2 MIN 13+.5/-.2 40 MIN
R S T U V
QTY/REEL
2.5 MIN 10 MIN 18.4 MAX 332 MAX 12.4 +2/-0 1,000
REEL
PLASTIC
MEMS First™ is a registered trademark of SiTime Corporation.
2.50
±0.15
3.20
±0.15
1.05
±0.15 0.75 ±0.10 (X4)
1.20
±0.10
1.00
±0.10
1.00
±0.10
1
23
4
MARKING
ORIENTATION
Ecliptek MEMS Oscillators
-
Lower Cost, Quicker Delivery Alternative!
The EMO™ family of oscillators offers exceptional performance, shorter delivery and significant
cost advantages by utilizing a revolutionary new MEMS resonator technology. This important
innovation enables Ecliptek to offer the ultimate in flexibility with delivery of 2 days for sam ples
and 5 to 10 days for quantities up to 10,000 pieces on tape and reel.
Package Dimensions
(all dimensions in millimeters)
Supply
Voltage
(VDC) 5 x 7 3.2 x 5 2.5 x 3.2 2 x 2.5
1.8 EMK11 EMK21 EMK31 EMK41
2.5 EMK12 EMK22 EMK32 EMK42
3.3 EMK13 EMK23 EMK33 EMK43
Would you like to request EMO™ samples or a quotation now?
Click Here
Want to learn more about the Ecliptek EMO™ family of MEMS oscillators?
Click Here
Product Features:
• Improved frequency stability through the use of a MEMS resonator
• 1.8VDC, 2.5VDC, or 3.3VDC supply voltages
• Frequency range of 1MHz to 125MHz, HCMOS output
• Frequency stability to ±50ppm, -40°C to +85°C operation
• Tri-state or power down functions
• RoHS compliant
• High temperature +260°C reflow capability
• EIA compliant tape and reel packaging
• Four SMD package sizes
If you have any questions or would like additional information regarding the
Ecliptek EMO™ family of oscillators, please contact our Sales Department.
