SP001637286 BGC100GN6 Switchable Wideband Directional Coupler IC Features Fully integrated coupler in RF CMOS Bi-directional coupler Fitted for feedback receivers to accomplish closed loop power control and antenna tuning Wide frequency range: 0.6 to 2.7 GHz Designed for low insertion loss and high directivity Supports all cellular standards: GSM /WCDMA / HSPA+ / FDD-LTE / TDLTE / TD-SCDMA / CDMA Integrated low-pass filter for 5GHz WiFi jammers suppression GPIO controlled Small form factor 1.1mm x 0.7mm RoHS and WEEE compliant package Product validation: Qualified for industrial applications according to the relevant tests of JEDEC47/20/22 Description The BGC100GN6 bi-directional coupler IC is designed for 2G/3G/4G RF front end applications. The device contains a bidirectional coupler operating in one or multiple bands within 0.6 to 2.7 GHz frequency range. The coupled output contains a low-pass filter for 5 GHz ISM blockers suppression. The coupler offers low insertion loss and high directivity. The coupler is controlled via a GPIO pin. No external power supply blocking or RF decoupling capacitors are required. The BGC100GN6 is a fully integrated device deploying Infineon high volume RF-CMOS technology. The device has a very small size of only 1.1 x 0.7mm2 and a maximum heigth of 0.4 mm. Datasheet Summary www.infineon.com Please read the Important Notice and Warnings at the end of this document page 1 of 2 V 2.1 2018-01-03 BGC100GN6 Switchable Wideband Directional Coupler IC Block diagram and ordering information Block diagram and ordering information Figure 1 BGC100GN6 Block diagram Table 1 Ordering Information Type Package Marking BGC100GN6 TSNP-6-2 2 Trademarks All referenced product or service names and trademarks are the property of their respective owners. Edition 2018-01-03 Published by Infineon Technologies AG 81726 Munchen, Germany (c) 2018 Infineon Technologies AG. All Rights Reserved. Do you have a question about this document? Email: erratum@infineon.com Document reference ifx1 IMPORTANT NOTICE The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics ("Beschaffenheitsgarantie") . With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer's compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer's products and any use of the product of Infineon Technologies in customer's applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer's technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. For further information on the product, technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies office (www.infineon.com). WARNINGS Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies' products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.