3M™Polyimide Film Tape 5413
Product Description
3M™ Polyimide Film Tape 5413 consists of a Kapton®polyimide film and silicone adhesive designed for high temperature
applications.
Product Construction
Backing Adhesive Liner Color Standard Roll Length
Kapton®Polyimide Film Silicone None Amber 36 yds. (33 m)
3
Technical Data September, 2010
Typical Physical Properties
Note: The following technical information and data should be considered representative or typical only and should not be used
for specification purposes.
ASTM Test Method
Adhesion to Steel: 22 oz./in. width (24 N/100 mm) D-3330
Tensile Strength at Break: 33 lbs./in. width (578 N/100 mm) D-3759
Elongation at Break: 62% D-3759
Backing Thickness: 1.0 mil (0.03 mm) D-3652
Total Tape Thickness: 2.7 mil (0.07 mm) D-3652
Temperature Use Range: -100° to 500°F (-73° to 260°C)
Dielectric Strength: 7000 volts D-149
Outgassing: %TLM = 1.50; %CVCM = 0.50 E-595
Flame Retardancy: Pass per UL-510
product category:
OANZ2
File E230409
3M™Polyimide Film Tape 5413
Application Ideas
• Mask for protection of gold fingers of printed circuit boards during wave solder or solder dip process.
• Release surface in fabrication of parts cured at elevated temperatures.
Storage
Store under normal conditions of 60° to 80°F (16° to 27°C) and 40 to 50% R.H. in the original carton.
Shelf Life
To obtain best performance, use this product within 3 years from date of manufacture.
Key Attributes
Features Advantages Benefits
Thin Kapton®Dimensionally stable at high temperatures No rework – high productivity
polyimide film Flame retardant, chemical and radiation Protects surfaces, helping reduce
resistant replacement costs
Silicone adhesive High temperature performance reduces No cleaning required –
adhesive transfer helps increase productivity
High adhesive to Reduces adhesive transfer No cleaning required –
film bond helps increase productivity
(2)
Features
• At room temperature, the properties of Kapton®and polyimide polyester films are similar, however, as the temperature
increases or decreases, the properties of the Kapton®film are less affected than polyester.
• Kapton®film does not soften at elevated temperatures, thus the film provides an excellent release surface at elevated
temperatures.
• RoHS compliant.
Kapton is a registered trademark of
E.I. DuPont de Nemours Co.
3M is a trademark of 3M Company.
Please recycle. Printed in U.S.A.
©3M 2010. All rights reserved.
70-0703-2532-2
3
Electronics Markets Materials Division
3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
1-866-599-4227 phone
651-778-4244 fax
www.3M.com/electronics 3
3M™Polyimide Film Tape 5413
(3)
For Additional Information
To request additional product information or to arrange for sales assistance, call toll free 1-866-599-4227. Address
correspondence to: 3M, Electronics Markets Materials Division, 3M Center, Building 225-3S-06, St. Paul, MN 55144-
1000. Our fax number is 651-778-4244 or 1-877-369-2923. In Canada, phone: 1-800-364-3577. In Puerto Rico, phone:
1-787-750-3000. In Mexico, phone: 52-70-04-00.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed
to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and
determine if it is suitable for your intended application. You assume all risks and liability associated with such use.
Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements
contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized
officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture at the time of purchase. 3M MAKES NO OTHER
WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above,
your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M
product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of the legal theory asserted.
Certification/Recognition
MSDS: 3M has not prepared a MSDS for this product which is not subject to the MSDS requirements of the Occupational
Safety and Health Administration’s Hazard Communication Standard, 29 C.F.R. 1910.1200(b)(6)(v). When used under
reasonable conditions or in accordance with the 3M directions for use, the product should not present a health and safety
hazard. However, use or processing of the product in a manner not in accordance with the directions for use may affect its
performance and present potential health and safety hazards.
TSCA: This product is defined as an article under the Toxic Substances Control Act and therefore, it is exempt from
inventory listing requirements.
RoHs Complaint/REACH Compliant: This product complies with the European Union’s “Restriction of Hazardous
Substances” (RoHs) initiative and with European REACH regulations 2002/95/EC and 2005/618/EC.
