______________________________________________________________________________________________________________________________ 1 of 2
SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com
Specifications All Specifications are typical at nominal input, full load at 25
°
C unless otherwise stated.
100-240VAC, +/-10%, 47-63 Hz, 1∅.
Switching – Battery Charger
1.0A maximum, at 110Vac
Hiccup Mode
Inrush limiting provided.
Hiccup Mode
Internal Primary Current Fuse is provided.
Approvals and Safety Standards
EN/IEC/CSA/UL60950-1, EMC: EN55022/55024/61000
See chart.
Input-Output: 4242VDC, Input-GND: 1500VAC, Output-GND: 500VDC
See chart
0° to 40°C, no derating
Not required.
-30 to +85°C.
:
Lead Acid 6V/12V/24V
5% to 95%, non-condensing
Constant current and constant voltage.
0 to 10,000 ft.
<1.75V ±0.03V / cell
>61,000 hours (calculated)
2.45V +/-0.2V / cell (measured at PCB output)
5.9”(L) x 2.56”(W) x 1.38(H)”, 149mm(L) x 64mm(W) x 45mm(H)
2.30V +/-0.2V / cell (measured at PCB output)
Black 94V0 Polycarbonate
> 2.5V ± 0.16V / cell
Cable: 18AWG, 2 conductor. Connector: 2.5mm barrel type (Ault #3)
connector, center contact (+). Other connector options are available.
LED Off: Battery Unloaded, output shorted.
R/G/A 1 second on/off: Application of Power, or Power reset.
Red LED On: Fast Charge
Green LED On: Fully Charged or Trickle Charge
Amber LED On: Float Charge
Flickering Red LED: Error (Output overvoltage (>2.5V /cell), or undervoltage (<1.75V /cell)
LED error blink rate is 500 mSec on, 500 mSec off.
JBL745-2 Series
Universal Input, 26–32 Watt Output
Sealed Lead Acid Fast Chargers 2 Year Warranty
•
100-240VAC Universal Input
•
Optimizes Battery Life
•
6V to 24V Output Models, up to 32W
•
Tri-color LED Indicator
•
Modified and Custom Designs Available
•
Impact-Resistant Polycarbonate Enclosure
•
Meets safety agency requirements