74LVX245 Low Voltage Octal Bidirectional Transceiver General Description Features The LVX245 contains eight non-inverting bidirectional buffers is intended for bus-oriented applications. The Transmit/ Receive (T/R) input determines the direction of data flow through the bidirectional transceiver. Transmit (activeHIGH) enables data from A ports to B ports; Receive (active-LOW) enables data from B ports to A ports. The Output Enable input, when HIGH, disables both A and B ports by placing them in a HIGH-Z condition. Y Y Y Ideal for low power/low noise 3.3V applications Available in SOIC JEDEC, SOIC EIAJ and TSSOP packages Guaranteed simultaneous switching noise level and dynamic threshold performance Logic Symbols Connection Diagram Pin Assignment for SOIC and TSSOP TL/F/11597-1 TL/F/11597 - 3 TL/F/11597 - 5 Pin Names Description OE T/R A 0 - A7 B 0 - B7 Output Enable Input Transmit/Receive Input Side A TRI-STATEE Inputs or TRI-STATE Outputs Side B TRI-STATE Inputs or TRI-STATE Outputs Truth Table Inputs Outputs OE T/R L L H L H X H e HIGH Voltage Level Order Number Bus B Data to Bus A Bus A Data to Bus B HIGH-Z State L e LOW Voltage Level X e Immaterial SOIC JEDEC SOIC EIAJ TSSOP 74LVX245M 74LVX245MX 74LVX245SJ 74LVX245SJX 74LVX245MTC 74LVX245MTCX M20B M20D MTC20 See NS Package Number TRI-STATEE is a registered trademark of National Semiconductor Corporation. C1996 National Semiconductor Corporation TL/F/11597 RRD-B30M17/Printed in U. S. A. http://www.national.com 74LVX245 Low Voltage Octal Bidirectional Transceiver January 1996 Absolute Maximum Ratings (Note) Recommended Operating Conditions If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Supply Voltage (VCC) Input Voltage T/R, OE (VI) Bus I/O Voltage (VI/O) Operating Temperature (TA) Input Rise and Fall Time (Dt/DV) b 0.5V to a 7.0V Supply Voltage (VCC) DC Input Diode Current (IIK) b 20 mA VI e b0.5V b 0.5V to 7V DC Input Voltage T/R, OE (VI) DC Diode Current (IOK) b 20 mA VO e b0.5V a 20 mA VO e VCC a 0.5V b 0.5V to VCC a 0.5V DC Bus I/O Voltage (VI/O) DC Output Source g 25 mA or Sink Current (IO) DC VCC or Ground Current g 75 mA (ICC or IGND) b 65 C to a 150 C Storage Temperature (TSTG) Power Dissipation 180 mW Note: The ``Absolute Maximum Ratings'' are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the ``Electrical Characteristics'' table are not guaranteed at the absolute maximum ratings. The ``Recommended Operating Conditions'' table will define the conditions for actual device operation. 2.0V to 3.6V 0V to 5.5V 0V to VCC b 40 C to a 85 C 0 ns/V to 100 ns/V DC Electrical Characteristics Symbol Parameter VCC 74LVX245 74LVX245 TA e a 25 C TA e b 40 C to a 85 C Min VIH VIL VOH VOL IOZ IIN ICC High Level Input Voltage 2.0 3.0 3.6 Low Level Input Voltage 2.0 3.0 3.6 High Level Output Voltage 2.0 3.0 3.0 Low Level Output Voltage 2.0 3.0 3.0 TRI-STATE Output Off-State Current 3.6 Input Leakage Current 3.6 Quiescent Supply Current 3.6 http://www.national.com Typ Max 1.5 2.0 2.4 Min 1.9 2.9 2.58 2.0 3.0 0.0 0.0 V 0.5 0.8 0.8 1.9 2.9 2.48 V VIN e VIH or VIL IOH e b50 mA IOH e b50 mA IOH e b4 mA VIN e VIH or VIL IOL e 50 mA IOL e 50 mA IOL e 4 mA V 0.1 0.1 0.36 0.1 0.1 0.44 g 0.25 g 2.5 V mA g 0.1 Conditions Max 1.5 2.0 2.4 0.5 0.8 0.8 Units g 1.0 VIN e VIH or VIL VOUT e VCC or GND VIN e 5.5V or GND mA 4.0 40.0 VIN e VCC or GND mA 2 Noise Characteristics 74LVX245 Symbol VCC (V) Parameter TA e 25 C Typ Units Conditions CL (pF) Limit VOLP Quiet Output Maximum Dynamic VOL 3.3 0.5 0.8 V 50 VOLV Quiet Output Minimum Dynamic VOL 3.3 b 0.5 b 0.8 V 50 VIHD Minimum High Level Dynamic Input Voltage 3.3 2.0 V 50 VILD Maximum Low Level Dynamic Input Voltage 3.3 0.8 V 50 Note: Input tr e tf e 3 ns AC Electrical Characteristics Symbol Parameter VCC (V) 74LVX245 74LVX245 TA e a 25 C TA e b 40 C to a 85 C Min tPLH tPHL Propagation Delay Time 2.7 3.3 g 0.3 tPZL tPZH TRI-STATE Output Enable Time 2.7 3.3 g 0.3 tPLZ tPHZ TRI-STATE Output Disable Time tOSLH tOSHL Output to Output Skew (Note 1) Units Conditions Typ Max Min 6.1 10.7 1.0 Max 13.5 CL e 15 pF 8.6 14.2 1.0 17.0 CL e 50 pF 4.7 6.8 1.0 8.0 CL e 15 pF 7.2 10.1 1.0 11.5 CL e 50 pF CL e 15 pF, RL e 1 kX ns 9.0 16.9 1.0 20.5 11.5 20.4 1.0 24.0 7.1 11.0 1.0 13.0 CL e 15 pF, RL e 1 kX 9.6 14.5 1.0 16.5 CL e 50 pF, RL e 1 kX 2.7 11.5 18.0 1.0 21.0 3.3 g 0.3 9.6 12.8 1.0 14.5 2.7 1.5 1.5 ns ns CL e 50 pF, RL e 1 kX CL e 50 pF, RL e 1 kX CL e 50 pF, RL e 1 kX ns CL e 50 pF (Note 1) Note 1: Parameter guaranteed by design. tOSLH e l tPLHm b tPLHn l , tOSHL e l tPHLm b tPHLn l Capacitance Symbol Parameter 74LVX245 74LVX245 TA e a 25 C TA e b 40 C to a 85 C Min Min Units Typ Max CIN Input Capacitance T/R, OE 4 10 Max CI/O Output Capacitance An, Bn 8 pF CPD Power Dissipation Capacitance (Note 1) 21 pF 10 pF Note 1: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. CPD c VCC c fIN a ICC Average operating current can be obtained by the equation: ICC(opr.) e 8 (per bit) 3 http://www.national.com 74LVX245 Ordering Information The device number is used to form part of a simplified purchasing code where the package type and temperature range are defined as follows: TL/F/11597 - 7 Physical Dimensions inches (millimeters) unless otherwise noted 20-Lead Small Outline Integrated Circuit (M) Order Number 74LVX245M or 74LVX245MX NS Package Number M20B http://www.national.com 4 Physical Dimensions inches (millimeters) unless otherwise noted 20-Lead Small Outline Package EIAJ SOIC (SJ) Order Number 74LVX245SJ or 74LVX245SJX NS Package Number M20D 5 http://www.national.com 74LVX245 Low Voltage Octal Bidirectional Transceiver Physical Dimensions All dimensions in millimeters (Continued) 20-Lead Thin Shrink Small Outline Package, JEDEC Order Number 74LVX245MTC or 74LVX245MTCX NS Package Number MTC20 LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 Email: support @ nsc.com http://www.national.com 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: a49 (0) 180-530 85 86 Email: europe.support @ nsc.com Deutsch Tel: a49 (0) 180-530 85 85 English Tel: a49 (0) 180-532 78 32 Fran3ais Tel: a49 (0) 180-532 93 58 Italiano Tel: a49 (0) 180-534 16 80 National Semiconductor Southeast Asia Fax: (852) 2376 3901 Email: sea.support @ nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5620-7561 Fax: 81-3-5620-6179 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.