Data SheetData Sheet
EPCOS AG 2008. Reproduction, publication and dissemination of this publication, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SIOV metal oxide varistors
Leaded varistors, StandarD series
Series/Type: S05, S07, S10, S14, S20
Date: December 2007
211/07
Please read Cautions and warnings and
Important notes at the end of this document.
Construction
Round varistor element, leaded
Coating: epoxy resin, flame-retardant to UL 94 V-0
Terminals: tinned copper wire
Features
Wide operating voltage range 11 … 1100 VRMS
High surge current ratings up to 8 kA
No derating up to 85 °C ambient temperature
PSpice models
Approvals
UL
CSA (all types K115)
SEV
VDE
CECC
CQC S05/07 (K11 K460), S10/S14 (K11 K680), S20 (K11 K1100)
IEC
Delivery mode
Bulk (standard), taped versions on reel or in Ammo pack upon request.
For further details refer to chapter “Taping, packaging and lead configuration” for leaded varistors.
Options
S10* types with lead spacing 5.0 mm and S20* types with lead spacing 7.5 mm are also available
on request.
General technical data
Climatic category to IEC 60068-1 40/85/56
Operating temperature to CECC 42 000 40 … + 85 °C
Storage temperature 40 … +125 °C
Electric strength to CECC 42 000 2.5 kVRMS
Insulation resistance to CECC 42 000 10 M
Response time <25 ns
Leaded varistors
StandarD series
311/07
Please read Cautions and warnings and
Important notes at the end of this document.
Maximum ratings (TA = 85 °C)
Ordering code Type
(untaped)
SIOV-
VRMS
V
VDC
V
imax
(8/20 µs)
A
Wmax
(2 ms)
J
Pmax
W
B72205S0110K101 S05K11 11 14 100 0.3 0.01
B72207S0110K101 S07K11 11 14 250 0.8 0.02
B72210S0110K101 S10K11 11 14 500 1.7 0.05
B72214S0110K101 S14K11 11 14 1000 3.2 0.10
B72220S0110K101 S20K11 11 14 2000 10.0 0.20
B72205S0140K101 S05K14 14 18 100 0.4 0.01
B72207S0140K101 S07K14 14 181) 250 0.9 0.02
B72210S0140K101 S10K14 14 181) 500 2.0 0.05
B72214S0140K101 S14K14 14 181) 1000 4.0 0.10
B72220S0140K101 S20K14 14 181) 2000 12.0 0.20
B72205S0170K101 S05K17 17 22 100 0.5 0.01
B72207S0170K101 S07K17 17 22 250 1.1 0.02
B72210S0170K101 S10K17 17 22 500 2.5 0.05
B72214S0170K101 S14K17 17 22 1000 5.0 0.10
B72220S0170K101 S20K17 17 22 2000 14.0 0.20
B72205S0200K101 S05K20 20 26 100 0.6 0.01
B72207S0200K101 S07K20 20 26 250 1.3 0.02
B72210S0200K101 S10K20 20 26 500 3.1 0.05
B72214S0200K101 S14K20 20 26 1000 6.0 0.10
B72220S0200K101 S20K20 20 26 2000 18.0 0.20
B72205S0250K101 S05K25 25 31 100 0.7 0.01
B72207S0250K101 S07K25 25 31 250 1.6 0.02
B72210S0250K101 S10K25 25 31 500 3.7 0.05
B72214S0250K101 S14K25 25 31 1000 7.0 0.10
B72220S0250K101 S20K25 25 31 2000 22.0 0.20
B72205S0300K101 S05K30 30 38 100 0.9 0.01
B72207S0300K101 S07K30 30 38 250 2.0 0.02
B72210S0300K101 S10K30 30 38 500 4.4 0.05
B72214S0300K101 S14K30 30 38 1000 9.0 0.10
B72220S0300K101 S20K30 30 38 2000 26.0 0.20
1) Jump-start strength (max. 24 V, 5 minutes)
StandarD series
Leaded varistors
411/07
Please read Cautions and warnings and
Important notes at the end of this document.
Characteristics (TA = 25 °C)
Ordering code Vv
(1 mA)
V
Vv
(1 mA)
%
vc, max
(ic)
V
ic
A
Ctyp
(1 kHz)
pF
B72205S0110K101 18 ±10 36 1.0 1750
B72207S0110K101 18 ±10 36 2.5 2750
B72210S0110K101 18 ±10 36 5.0 6250
B72214S0110K101 18 ±10 36 10.0 12100
B72220S0110K101 18 ±10 36 20.0 23000
B72205S0140K101 22 ±10 43 1.0 1450
B72207S0140K101 22 ±10 43 2.5 2300
B72210S0140K101 22 ±10 43 5.0 5200
B72214S0140K101 22 ±10 43 10.0 9950
B72220S0140K101 22 ±10 43 20.0 19000
B72205S0170K101 27 ±10 53 1.0 1200
B72207S0170K101 27 ±10 53 2.5 1900
B72210S0170K101 27 ±10 53 5.0 4350
B72214S0170K101 27 ±10 53 10.0 8200
B72220S0170K101 27 ±10 53 20.0 15600
B72205S0200K101 33 ±10 65 1.0 980
B72207S0200K101 33 ±10 65 2.5 1600
B72210S0200K101 33 ±10 65 5.0 3650
B72214S0200K101 33 ±10 65 10.0 6800
B72220S0200K101 33 ±10 65 20.0 13000
B72205S0250K101 39 ±10 77 1.0 850
B72207S0250K101 39 ±10 77 2.5 1400
B72210S0250K101 39 ±10 77 5.0 3200
B72214S0250K101 39 ±10 77 10.0 5850
B72220S0250K101 39 ±10 77 20.0 11100
B72205S0300K101 47 ±10 93 1.0 720
B72207S0300K101 47 ±10 93 2.5 1200
B72210S0300K101 47 ±10 93 5.0 2750
B72214S0300K101 47 ±10 93 10.0 4950
B72220S0300K101 47 ±10 93 20.0 9350
StandarD series
Leaded varistors
511/07
Please read Cautions and warnings and
Important notes at the end of this document.
B72205S0350K101 S05K35 35 45 100 1.1 0.01
B72207S0350K101 S07K35 35 45 250 2.5 0.02
B72210S0350K101 S10K35 35 45 500 5.4 0.05
B72214S0350K101 S14K35 35 45 1000 10.0 0.10
B72220S0350K101 S20K35 35 45 2000 33.0 0.20
B72205S0400K101 S05K40 40 56 100 1.3 0.01
B72207S0400K101 S07K40 40 56 250 3.0 0.02
B72210S0400K101 S10K40 40 56 500 6.4 0.05
B72214S0400K101 S14K40 40 56 1000 13.0 0.10
B72220S0400K101 S20K40 40 56 2000 37.0 0.20
B72205S0500K101 S05K50 50 65 400 1.8 0.10
B72207S0500K101 S07K50 50 65 1200 4.2 0.25
B72210S0500K101 S10K50 50 65 2500 8.4 0.40
B72214S0500K101 S14K50 50 65 4500 15.0 0.60
B72220S0500K101 S20K50 50 65 6500 27.0 1.00
B72205S0600K101 S05K60 60 85 400 2.2 0.10
B72207S0600K101 S07K60 60 85 1200 4.8 0.25
B72210S0600K101 S10K60 60 85 2500 10.0 0.40
B72214S0600K101 S14K60 60 85 4500 17.0 0.60
B72220S0600K101 S20K60 60 85 6500 33.0 1.00
B72205S0750K101 S05K75 75 100 400 2.5 0.10
B72207S0750K101 S07K75 75 100 1200 5.9 0.25
B72210S0750K101 S10K75 75 100 2500 12.0 0.40
B72214S0750K101 S14K75 75 100 4500 20.0 0.60
B72220S0750K101 S20K75 75 100 6500 40.0 1.00
B72205S0950K101 S05K95 95 125 400 3.4 0.10
B72207S0950K101 S07K95 95 125 1200 7.6 0.25
B72210S0950K101 S10K95 95 125 2500 15.0 0.40
B72214S0950K101 S14K95 95 125 4500 25.0 0.60
B72220S0950K101 S20K95 95 125 6500 50.0 1.00
Maximum ratings (TA = 85 °C)
Ordering code Type
(untaped)
SIOV-
VRMS
V
VDC
V
imax
(8/20 µs)
A
Wmax
(2 ms)
J
Pmax
W
StandarD series
Leaded varistors
611/07
Please read Cautions and warnings and
Important notes at the end of this document.
B72205S0350K101 56 ±10 110 1.0 620
B72207S0350K101 56 ±10 110 2.5 1050
B72210S0350K101 56 ±10 110 5.0 2400
B72214S0350K101 56 ±10 110 10.0 4200
B72220S0350K101 56 ±10 110 20.0 8000
B72205S0400K101 68 ±10 135 1.0 520
B72207S0400K101 68 ±10 135 2.5 900
B72210S0400K101 68 ±10 135 5.0 2100
B72214S0400K101 68 ±10 135 10.0 3550
B72220S0400K101 68 ±10 135 20.0 6750
B72205S0500K101 82 ±10 135 5.0 300
B72207S0500K101 82 ±10 135 10.0 530
B72210S0500K101 82 ±10 135 25.0 950
B72214S0500K101 82 ±10 135 50.0 1800
B72220S0500K101 82 ±10 135 100.0 3800
B72205S0600K101 100 ±10 165 5.0 250
B72207S0600K101 100 ±10 165 10.0 480
B72210S0600K101 100 ±10 165 25.0 870
B72214S0600K101 100 ±10 165 50.0 1650
B72220S0600K101 100 ±10 165 100.0 3600
B72205S0750K101 120 ±10 200 5.0 210
B72207S0750K101 120 ±10 200 10.0 430
B72210S0750K101 120 ±10 200 25.0 720
B72214S0750K101 120 ±10 200 50.0 1370
B72220S0750K101 120 ±10 200 100.0 2900
B72205S0950K101 150 ±10 250 5.0 135
B72207S0950K101 150 ±10 250 10.0 260
B72210S0950K101 150 ±10 250 25.0 530
B72214S0950K101 150 ±10 250 50.0 870
B72220S0950K101 150 ±10 250 100.0 1830
Characteristics (TA = 25 °C)
Ordering code Vv
(1 mA)
V
Vv
(1 mA)
%
vc, max
(ic)
V
ic
A
Ctyp
(1 kHz)
pF
StandarD series
Leaded varistors
711/07
Please read Cautions and warnings and
Important notes at the end of this document.
B72205S0111K101 S05K115 115 150 400 3.6 0.10
B72207S0111K101 S07K115 115 150 1200 8.4 0.25
B72210S0111K101 S10K115 115 150 2500 18.0 0.40
B72214S0111K101 S14K115 115 150 4500 30.0 0.60
B72220S0111K101 S20K115 115 150 6500 60.0 1.00
B72205S0131K101 S05K130 130 170 400 4.2 0.10
B72207S0131K101 S07K130 130 170 1200 9.5 0.25
B72210S0131K101 S10K130 130 170 2500 19.0 0.40
B72214S0131K101 S14K130 130 170 4500 34.0 0.60
B72220S0131K101 S20K130 130 170 8000 74.0 1.00
B72205S0141K101 S05K140 140 180 400 4.5 0.10
B72207S0141K101 S07K140 140 180 1200 10.0 0.25
B72210S0141K101 S10K140 140 180 2500 22.0 0.40
B72214S0141K101 S14K140 140 180 4500 36.0 0.60
B72220S0141K101 S20K140 140 180 8000 78.0 1.00
B72205S0151K101 S05K150 150 200 400 4.9 0.10
B72207S0151K101 S07K150 150 200 1200 11.0 0.25
B72210S0151K101 S10K150 150 200 2500 24.0 0.40
B72214S0151K101 S14K150 150 200 4500 40.0 0.60
B72220S0151K101 S20K150 150 200 8000 85.0 1.00
B72205S0171K101 S05K175 175 225 400 5.6 0.10
B72207S0171K101 S07K175 175 225 1200 13.0 0.25
B72210S0171K101 S10K175 175 225 2500 28.0 0.40
B72214S0171K101 S14K175 175 225 4500 46.0 0.60
B72220S0171K101 S20K175 175 225 8000 98.0 1.00
B72205S0231K101 S05K230 230 300 400 7.2 0.10
B72207S0231K101 S07K230 230 300 1200 17.0 0.25
B72210S0231K101 S10K230 230 300 2500 36.0 0.40
B72214S0231K101 S14K230 230 300 4500 60.0 0.60
B72220S0231K101 S20K230 230 300 8000 130.0 1.00
B72205S0251K101 S05K250 250 320 400 8.2 0.10
B72207S0251K101 S07K250 250 320 1200 19.0 0.25
B72210S0251K101 S10K250 250 320 2500 38.0 0.40
B72214S0251K101 S14K250 250 320 4500 65.0 0.60
B72220S0251K101 S20K250 250 320 8000 140.0 1.00
Maximum ratings (TA = 85 °C)
Ordering code Type
(untaped)
SIOV-
VRMS
V
VDC
V
imax
(8/20 µs)
A
Wmax
(2 ms)
J
Pmax
W
StandarD series
Leaded varistors
811/07
Please read Cautions and warnings and
Important notes at the end of this document.
B72205S0111K101 180 ±10 300 5.0 110
B72207S0111K101 180 ±10 300 10.0 220
B72210S0111K101 180 ±10 300 25.0 445
B72214S0111K101 180 ±10 300 50.0 730
B72220S0111K101 180 ±10 300 100.0 1520
B72205S0131K101 205 ±10 340 5.0 100
B72207S0131K101 205 ±10 340 10.0 200
B72210S0131K101 205 ±10 340 25.0 400
B72214S0131K101 205 ±10 340 50.0 650
B72220S0131K101 205 ±10 340 100.0 1340
B72205S0141K101 220 ±10 360 5.0 95
B72207S0141K101 220 ±10 360 10.0 180
B72210S0141K101 220 ±10 360 25.0 370
B72214S0141K101 220 ±10 360 50.0 610
B72220S0141K101 220 ±10 360 100.0 1240
B72205S0151K101 240 ±10 395 5.0 90
B72207S0151K101 240 ±10 395 10.0 170
B72210S0151K101 240 ±10 395 25.0 350
B72214S0151K101 240 ±10 395 50.0 570
B72220S0151K101 240 ±10 395 100.0 1160
B72205S0171K101 270 ±10 455 5.0 75
B72207S0171K101 270 ±10 455 10.0 150
B72210S0171K101 270 ±10 455 25.0 300
B72214S0171K101 270 ±10 455 50.0 490
B72220S0171K101 270 ±10 455 100.0 1000
B72205S0231K101 360 ±10 595 5.0 60
B72207S0231K101 360 ±10 595 10.0 115
B72210S0231K101 360 ±10 595 25.0 230
B72214S0231K101 360 ±10 595 50.0 380
B72220S0231K101 360 ±10 595 100.0 760
B72205S0251K101 390 ±10 650 5.0 55
B72207S0251K101 390 ±10 650 10.0 105
B72210S0251K101 390 ±10 650 25.0 215
B72214S0251K101 390 ±10 650 50.0 350
B72220S0251K101 390 ±10 650 100.0 700
Characteristics (TA = 25 °C)
Ordering code Vv
(1 mA)
V
Vv
(1 mA)
%
vc, max
(ic)
V
ic
A
Ctyp
(1 kHz)
pF
StandarD series
Leaded varistors
911/07
Please read Cautions and warnings and
Important notes at the end of this document.
B72205S0271K101 S05K275 275 350 400 8.6 0.10
B72207S0271K101 S07K275 275 350 1200 21.0 0.25
B72210S0271K101 S10K275 275 350 2500 43.0 0.40
B72214S0271K101 S14K275 275 350 4500 71.0 0.60
B72220S0271K101 S20K275 275 350 8000 151.0 1.00
B72205S0301K101 S05K300 300 385 400 9.6 0.10
B72207S0301K101 S07K300 300 385 1200 23.0 0.25
B72210S0301K101 S10K300 300 385 2500 47.0 0.40
B72214S0301K101 S14K300 300 385 4500 76.0 0.60
B72220S0301K101 S20K300 300 385 8000 173.0 1.00
B72210S0321K101 S10K320 320 420 2500 50.0 0.40
B72214S0321K101 S14K320 320 420 4500 84.0 0.60
B72220S0321K101 S20K320 320 420 8000 184.0 1.00
B72205S0381K101 S05K385 385 505 400 13.0 0.10
B72207S0381K101 S07K385 385 505 1200 28.0 0.25
B72210S0381K101 S10K385 385 505 2500 40.0 0.40
B72214S0381K101 S14K385 385 505 4500 80.0 0.60
B72220S0381K101 S20K385 385 505 8000 150.0 1.00
B72205S0421K101 S05K420 420 560 400 14.0 0.10
B72207S0421K101 S07K420 420 560 1200 32.0 0.25
B72210S0421K101 S10K420 420 560 2500 45.0 0.40
B72214S0421K101 S14K420 420 560 4500 90.0 0.60
B72220S0421K101 S20K420 420 560 8000 175.0 1.00
B72205S0441K101 S05K440 440 585 400 16.0 0.10
B72207S0441K101 S07K440 440 585 1200 34.0 0.25
B72210S0441K101 S10K440 440 585 2500 47.0 0.40
B72214S0441K101 S14K440 440 585 4500 95.0 0.60
B72220S0441K101 S20K440 440 585 8000 185.0 1.00
B72205S0461K101 S05K460 460 615 400 18.0 0.10
B72207S0461K101 S07K460 460 615 1200 36.0 0.25
B72210S0461K101 S10K460 460 615 2500 50.0 0.40
B72214S0461K101 S14K460 460 615 4500 100.0 0.60
B72220S0461K101 S20K460 460 615 8000 195.0 1.00
Maximum ratings (TA = 85 °C)
Ordering code Type
(untaped)
SIOV-
VRMS
V
VDC
V
imax
(8/20 µs)
A
Wmax
(2 ms)
J
Pmax
W
StandarD series
Leaded varistors
10 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
B72205S0271K101 430 ±10 710 5.0 50
B72207S0271K101 430 ±10 710 10.0 95
B72210S0271K101 430 ±10 710 25.0 195
B72214S0271K101 430 ±10 710 50.0 320
B72220S0271K101 430 ±10 710 100.0 630
B72205S0301K101 470 ±10 775 5.0 45
B72207S0301K101 470 ±10 775 10.0 90
B72210S0301K101 470 ±10 775 25.0 180
B72214S0301K101 470 ±10 775 50.0 300
B72220S0301K101 470 ±10 775 100.0 580
B72210S0321K101 510 ±10 840 25.0 170
B72214S0321K101 510 ±10 840 50.0 280
B72220S0321K101 510 ±10 840 100.0 540
B72205S0381K101 620 ±10 1025 5.0 40
B72207S0381K101 620 ±10 1025 10.0 75
B72210S0381K101 620 ±10 1025 25.0 150
B72214S0381K101 620 ±10 1025 50.0 240
B72220S0381K101 620 ±10 1025 100.0 450
B72205S0421K101 680 ±10 1120 5.0 35
B72207S0421K101 680 ±10 1120 10.0 65
B72210S0421K101 680 ±10 1120 25.0 135
B72214S0421K101 680 ±10 1120 50.0 220
B72220S0421K101 680 ±10 1120 100.0 420
B72205S0441K101 715 ±10 1180 5.0 32
B72207S0441K101 715 ±10 1180 10.0 60
B72210S0441K101 715 ±10 1180 25.0 125
B72214S0441K101 715 ±10 1180 50.0 210
B72220S0441K101 715 ±10 1180 100.0 400
B72205S0461K101 750 ±10 1240 5.0 30
B72207S0461K101 750 ±10 1240 10.0 55
B72210S0461K101 750 ±10 1240 25.0 120
B72214S0461K101 750 ±10 1240 50.0 200
B72220S0461K101 750 ±10 1240 100.0 380
Characteristics (TA = 25 °C)
Ordering code Vv
(1 mA)
V
Vv
(1 mA)
%
vc, max
(ic)
V
ic
A
Ctyp
(1 kHz)
pF
StandarD series
Leaded varistors
11 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
B72210S0511K101 S10K510 510 670 2500 55.0 0.40
B72214S0511K101 S14K510 510 670 4500 110.0 0.60
B72220S0511K101 S20K510 510 670 6500 190.0 1.00
B72210S0551K101 S10K550 550 745 2500 60.0 0.40
B72214S0551K101 S14K550 550 745 4500 120.0 0.60
B72220S0551K101 S20K550 550 745 6500 210.0 1.00
B72210S0621K101 S10K625 625 825 2500 68.0 0.40
B72214S0621K101 S14K625 625 825 4500 130.0 0.60
B72220S0621K101 S20K625 625 825 6500 230.0 1.00
B72210S0681K101 S10K680 680 895 2500 72.0 0.40
B72214S0681K101 S14K680 680 895 4500 140.0 0.60
B72220S0681K101 S20K680 680 895 6500 250.0 1.00
B72214S0102K101 S14K10001) 1100 1465 4500 230.0 0.60
B72220S0102K101 S20K10001) 1100 1465 6500 410.0 1.00
Maximum ratings (TA = 85 °C)
Ordering code Type
(untaped)
SIOV-
VRMS
V
VDC
V
imax
(8/20 µs)
A
Wmax
(2 ms)
J
Pmax
W
1) Operating voltage differs from type designation.
StandarD series
Leaded varistors
12 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
Characteristics (TA = 25 °C)
Ordering code Vv
(1 mA)
V
Vv
(1 mA)
%
vc, max
(ic)
V
ic
A
Ctyp
(1 kHz)
pF
B72210S0511K101 820 ±10 1355 25.0 110
B72214S0511K101 820 ±10 1355 50.0 180
B72220S0511K101 820 ±10 1355 100.0 340
B72210S0551K101 910 ±10 1500 25.0 105
B72214S0551K101 910 ±10 1500 50.0 170
B72220S0551K101 910 ±10 1500 100.0 320
B72210S0621K101 1000 ±10 1650 25.0 90
B72214S0621K101 1000 ±10 1650 50.0 150
B72220S0621K101 1000 ±10 1650 100.0 280
B72210S0681K101 1100 ±10 1815 25.0 85
B72214S0681K101 1100 ±10 1815 50.0 140
B72220S0681K101 1100 ±10 1815 100.0 250
B72214S0102K101 1800 ±10 2970 50.0 100
B72220S0102K101 1800 ±10 2970 100.0 170
StandarD series
Leaded varistors
13 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
Dimensional drawing Weight
Dimensions
Ordering code ±1
mm
a ±1
mm
bmax
mm
smax
mm
hmax
mm
Imin
mm
d ±0.05
mm
B72205S0110K101 5.0 1.2 7.0 3.3 8.5 25.0 0.6
B72207S0110K101 5.0 1.2 9.0 3.4 11.0 25.0 0.6
B72210S0110K101 7.5 1.4 12.0 4.0 14.5 25.0 0.8
B72214S0110K101 7.5 1.4 15.5 4.0 18.5 25.0 0.8
B72220S0110K101 10.0 1.5 21.5 4.5 25.5 25.0 1.0
B72205S0140K101 5.0 1.3 7.0 3.4 8.5 25.0 0.6
B72207S0140K101 5.0 1.3 9.0 3.5 11.0 25.0 0.6
B72210S0140K101 7.5 1.5 12.0 4.2 14.5 25.0 0.8
B72214S0140K101 7.5 1.5 15.5 4.2 18.5 25.0 0.8
B72220S0140K101 10.0 1.6 21.5 4.6 25.5 25.0 1.0
B72205S0170K101 5.0 1.4 7.0 3.5 8.5 25.0 0.6
B72207S0170K101 5.0 1.4 9.0 3.6 11.0 25.0 0.6
B72210S0170K101 7.5 1.6 12.0 4.4 14.5 25.0 0.8
B72214S0170K101 7.5 1.7 15.5 4.4 18.5 25.0 0.8
B72220S0170K101 10.0 1.8 21.5 4.8 25.5 25.0 1.0
B72205S0200K101 5.0 1.2 7.0 3.5 8.5 25.0 0.6
B72207S0200K101 5.0 1.2 9.0 3.6 11.0 25.0 0.6
B72210S0200K101 7.5 1.8 12.0 4.5 14.5 25.0 0.8
B72214S0200K101 7.5 1.9 15.5 4.6 18.5 25.0 0.8
B72220S0200K101 10.0 2.1 21.5 5.1 25.5 25.0 1.0
VAR0408-C
ød
3 max.
bs
a
h
a
Bottom view
1)
1) Seating plane to IEC 60717
e
e
The weight of varistors in between these
voltage classes can be interpolated.
Nominal diameter
mm
VRMS
V
Weight
g
5 11 … 460 0.3 … 0.7
7 11 … 460 0.4 … 1.1
10 11 … 680 1.0 3.0
14 11 … 1000 1.4 … 7.6
20 11 … 1000 2.7 … 15.7
StandarD series
Leaded varistors
14 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
B72205S0250K101 5.0 1.3 7.0 3.6 8.5 25.0 0.6
B72207S0250K101 5.0 1.3 9.0 3.7 11.0 25.0 0.6
B72210S0250K101 7.5 1.6 12.0 4.2 14.5 25.0 0.8
B72214S0250K101 7.5 1.7 15.5 4.2 18.5 25.0 0.8
B72220S0250K101 10.0 1.8 21.5 4.7 25.5 25.0 1.0
B72205S0300K101 5.0 1.5 7.0 3.6 8.5 25.0 0.6
B72207S0300K101 5.0 1.5 9.0 3.7 11.0 25.0 0.6
B72210S0300K101 7.5 1.7 12.0 4.4 14.5 25.0 0.8
B72214S0300K101 7.5 1.8 15.5 4.4 18.5 25.0 0.8
B72220S0300K101 10.0 2.0 21.5 4.9 25.5 25.0 1.0
B72205S0350K101 5.0 1.6 7.0 3.7 8.5 25.0 0.6
B72207S0350K101 5.0 1.6 9.0 3.9 11.0 25.0 0.6
B72210S0350K101 7.5 1.8 12.0 4.4 14.5 25.0 0.8
B72214S0350K101 7.5 2.0 15.5 4.5 18.5 25.0 0.8
B72220S0350K101 10.0 2.2 21.5 5.1 25.5 25.0 1.0
B72205S0400K101 5.0 1.8 7.0 3.9 8.5 25.0 0.6
B72207S0400K101 5.0 1.8 9.0 4.1 11.0 25.0 0.6
B72210S0400K101 7.5 2.1 12.0 4.8 14.5 25.0 0.8
B72214S0400K101 7.5 2.2 15.5 4.9 18.5 25.0 0.8
B72220S0400K101 10.0 2.4 21.5 5.4 25.5 25.0 1.0
B72205S0500K101 5.0 1.2 7.0 3.3 8.5 25.0 0.6
B72207S0500K101 5.0 1.2 9.0 3.3 11.0 25.0 0.6
B72210S0500K101 7.5 1.4 12.0 3.9 14.5 25.0 0.8
B72214S0500K101 7.5 1.4 15.5 3.9 18.5 25.0 0.8
B72220S0500K101 10.0 1.5 21.5 4.3 25.5 25.0 1.0
B72205S0600K101 5.0 1.2 7.0 3.3 8.5 25.0 0.6
B72207S0600K101 5.0 1.2 9.0 3.3 11.0 25.0 0.6
B72210S0600K101 7.5 1.4 12.0 4.0 14.5 25.0 0.8
B72214S0600K101 7.5 1.5 15.5 4.0 18.5 25.0 0.8
B72220S0600K101 10.0 1.6 21.5 4.4 25.5 25.0 1.0
B72205S0750K101 5.0 1.3 7.0 3.4 8.5 25.0 0.6
B72207S0750K101 5.0 1.3 9.0 3.6 11.0 25.0 0.6
B72210S0750K101 7.5 1.5 12.0 4.2 14.5 25.0 0.8
B72214S0750K101 7.5 1.5 15.5 4.2 18.5 25.0 0.8
B72220S0750K101 10.0 1.6 21.5 4.6 25.5 25.0 1.0
Dimensions
Ordering code ±1
mm
a ±1
mm
bmax
mm
smax
mm
hmax
mm
Imin
mm
d ±0.05
mm
StandarD series
Leaded varistors
15 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
B72205S0950K101 5.0 1.3 7.0 3.4 8.5 25.0 0.6
B72207S0950K101 5.0 1.3 9.0 3.4 11.0 25.0 0.6
B72210S0950K101 7.5 1.5 12.0 4.0 14.5 25.0 0.8
B72214S0950K101 7.5 1.5 15.5 4.0 18.5 25.0 0.8
B72220S0950K101 10.0 1.6 21.5 4.5 25.5 25.0 1.0
B72205S0111K101 5.0 1.5 7.0 3.6 8.5 25.0 0.6
B72207S0111K101 5.0 1.5 9.0 3.6 11.0 25.0 0.6
B72210S0111K101 7.5 1.6 12.0 4.2 14.5 25.0 0.8
B72214S0111K101 7.5 1.7 15.5 4.2 18.5 25.0 0.8
B72220S0111K101 10.0 1.8 21.5 4.6 25.5 25.0 1.0
B72205S0131K101 5.0 1.6 7.0 3.6 8.5 25.0 0.6
B72207S0131K101 5.0 1.6 9.0 3.6 11.0 25.0 0.6
B72210S0131K101 7.5 1.8 12.0 4.2 14.5 25.0 0.8
B72214S0131K101 7.5 1.9 15.5 4.2 18.5 25.0 0.8
B72220S0131K101 10.0 2.0 21.5 4.7 25.5 25.0 1.0
B72205S0141K101 5.0 1.7 7.0 3.7 8.5 25.0 0.6
B72207S0141K101 5.0 1.7 9.0 3.7 11.0 25.0 0.6
B72210S0141K101 7.5 1.9 12.0 4.3 14.5 25.0 0.8
B72214S0141K101 7.5 2.0 15.5 4.3 18.5 25.0 0.8
B72220S0141K101 10.0 2.1 21.5 4.8 25.5 25.0 1.0
B72205S0151K101 5.0 1.8 7.0 3.8 8.5 25.0 0.6
B72207S0151K101 5.0 1.8 9.0 3.8 11.0 25.0 0.6
B72210S0151K101 7.5 2.0 12.0 4.4 14.5 25.0 0.8
B72214S0151K101 7.5 2.1 15.5 4.4 18.5 25.0 0.8
B72220S0151K101 10.0 2.2 21.5 4.9 25.5 25.0 1.0
B72205S0171K101 5.0 2.0 7.0 3.9 8.5 25.0 0.6
B72207S0171K101 5.0 2.0 9.0 4.0 11.0 25.0 0.6
B72210S0171K101 7.5 2.2 12.0 4.6 14.5 25.0 0.8
B72214S0171K101 7.5 2.2 15.5 4.6 18.5 25.0 0.8
B72220S0171K101 10.0 2.3 21.5 5.0 25.5 25.0 1.0
B72205S0231K101 5.0 1.8 7.0 4.0 8.5 25.0 0.6
B72207S0231K101 5.0 1.8 9.0 4.0 11.0 25.0 0.6
B72210S0231K101 7.5 2.0 12.0 4.7 14.5 25.0 0.8
B72214S0231K101 7.5 2.0 15.5 4.7 18.5 25.0 0.8
B72220S0231K101 10.0 2.1 21.5 5.1 25.5 25.0 1.0
Dimensions
Ordering code ±1
mm
a ±1
mm
bmax
mm
smax
mm
hmax
mm
Imin
mm
d ±0.05
mm
StandarD series
Leaded varistors
16 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
B72205S0251K101 5.0 1.8 7.0 4.2 8.5 25.0 0.6
B72207S0251K101 5.0 1.8 9.0 4.2 11.0 25.0 0.6
B72210S0251K101 7.5 2.0 12.0 4.8 14.5 25.0 0.8
B72214S0251K101 7.5 2.0 15.5 4.8 18.5 25.0 0.8
B72220S0251K101 10.0 2.2 21.5 5.3 25.5 25.0 1.0
B72205S0271K101 5.0 2.0 7.0 4.3 8.5 25.0 0.6
B72207S0271K101 5.0 2.0 9.0 4.4 11.0 25.0 0.6
B72210S0271K101 7.5 2.2 12.0 5.0 14.5 25.0 0.8
B72214S0271K101 7.5 2.2 15.5 5.0 18.5 25.0 0.8
B72220S0271K101 10.0 2.3 21.5 5.4 25.5 25.0 1.0
B72205S0301K101 5.0 2.1 7.0 4.5 8.5 25.0 0.6
B72207S0301K101 5.0 2.1 9.0 4.5 11.0 25.0 0.6
B72210S0301K101 7.5 2.3 12.0 5.1 14.5 25.0 0.8
B72214S0301K101 7.5 2.3 15.5 5.2 18.5 25.0 0.8
B72220S0301K101 10.0 2.4 21.5 5.6 25.5 25.0 1.0
B72210S0321K101 7.5 2.4 12.0 5.4 15.0 25.0 0.8
B72214S0321K101 7.5 2.4 15.5 5.4 19.0 25.0 0.8
B72220S0321K101 10.0 2.6 21.5 5.8 25.5 25.0 1.0
B72205S0381K101 5.0 2.5 7.0 5.1 9.0 25.0 0.6
B72207S0381K101 5.0 2.5 9.0 5.2 11.5 25.0 0.6
B72210S0381K101 7.5 2.7 12.0 5.8 15.0 25.0 0.8
B72214S0381K101 7.5 2.7 15.5 5.9 19.0 25.0 0.8
B72220S0381K101 10.0 2.8 21.5 6.3 26.0 25.0 1.0
B72205S0421K101 5.0 2.8 7.0 5.4 9.0 25.0 0.6
B72207S0421K101 5.0 2.8 9.0 5.4 11.5 25.0 0.6
B72210S0421K101 7.5 2.9 12.0 6.1 15.0 25.0 0.8
B72214S0421K101 7.5 2.9 15.5 6.1 19.0 25.0 0.8
B72220S0421K101 10.0 3.1 21.5 6.5 26.0 25.0 1.0
B72205S0441K101 5.0 2.8 7.0 5.5 9.0 25.0 0.6
B72207S0441K101 5.0 2.8 9.0 5.5 11.5 25.0 0.6
B72210S0441K101 7.5 3.0 12.0 6.2 15.0 25.0 0.8
B72214S0441K101 7.5 3.0 15.5 6.3 19.0 25.0 0.8
B72220S0441K101 10.0 3.1 21.5 6.7 26.0 25.0 1.0
Dimensions
Ordering code ±1
mm
a ±1
mm
bmax
mm
smax
mm
hmax
mm
Imin
mm
d ±0.05
mm
StandarD series
Leaded varistors
17 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
B72205S0461K101 5.0 3.0 7.0 5.7 9.0 25.0 0.6
B72207S0461K101 5.0 3.0 9.0 5.7 11.5 25.0 0.6
B72210S0461K101 7.5 3.1 12.0 6.3 15.0 25.0 0.8
B72214S0461K101 7.5 3.1 15.5 6.4 19.0 25.0 0.8
B72220S0461K101 10.0 3.3 21.5 6.8 26.0 25.0 1.0
B72210S0511K101 7.5 3.4 12.0 6.7 15.0 25.0 0.8
B72214S0511K101 7.5 3.4 15.5 6.8 19.0 25.0 0.8
B72220S0511K101 10.0 3.5 21.5 7.1 26.0 25.0 1.0
B72210S0551K101 7.5 3.7 12.0 7.1 15.0 25.0 0.8
B72214S0551K101 7.5 3.7 15.5 7.2 19.0 25.0 0.8
B72220S0551K101 10.0 3.9 21.5 7.5 26.0 25.0 1.0
B72210S0621K101 7.5 4.0 12.0 7.5 15.0 25.0 0.8
B72214S0621K101 7.5 4.0 15.5 7.5 19.0 25.0 0.8
B72220S0621K101 10.0 4.2 21.5 7.9 26.0 25.0 1.0
B72210S0681K101 7.5 4.4 12.0 7.9 15.0 25.0 0.8
B72214S0681K101 7.5 4.4 15.5 8.0 19.0 25.0 0.8
B72220S0681K101 10.0 4.5 21.5 8.4 26.0 25.0 1.0
B72214S0102K101 7.5 6.7 15.5 11.0 20.5 25.0 0.8
B72220S0102K101 10.0 6.9 21.5 11.4 28.5 25.0 1.0
Dimensions
Ordering code ±1
mm
a ±1
mm
bmax
mm
smax
mm
hmax
mm
Imin
mm
d ±0.05
mm
StandarD series
Leaded varistors
18 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
Reliability data
Test Test methods/conditions Requirement
Varistor voltage The voltage between two terminals with
the specified measuring current applied
is called Vv (1 mADC @ 0.2 … 2 s).
To meet the specified value.
Clamping voltage The maximum voltage between two
terminals with the specified standard
impulse current (8/20 µs) applied.
To meet the specified value.
Max. AC operating voltage CECC 42 000, test 4.20
1000 h at UCT
After having continuously applied
the maximum allowable voltage at UCT
±2°C for 1000 h, the specimen shall be
stored at room temperature and normal
humidity for 1 to 2 h.
Thereafter, the change of Vv shall be
measured.
|V/V (1 mA)| 10%
Surge current derating,
8/20 µs
CECC 42 000, test C 2.1
100 surge currents (8/20 µs), unipolar,
interval 30 s, amplitude corresponding
to derating curve for 100 impulses at
20 µs
|V/V (1 mA)| 10%
(measured in direction
of surge current)
No visible damage
Surge current derating,
2ms
CECC 42 000, test C 2.1
100 surge currents (2 ms), unipolar,
interval 120 s, amplitude corresponding
to derating curve for 100 impulses at
2ms
|V/V (1 mA)| 10%
(measured in direction
of surge current)
No visible damage
Electric strength CECC 42 000, test 4.7
Metal balls method, 2500 VRMS, 60 s
The varistor is placed in a container
holding 1.6 ±0.2 mm diameter metal
balls such that only the terminations of
the varistor are protruding.
The specified voltage shall be applied
between both terminals of the speci-
men connected together and the elec-
trode inserted between the metal balls.
No breakdown
StandarD series
Leaded varistors
19 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
Climatic sequence CECC 42 000, test 4.16
The specimen shall be subjected to:
a) dry heat at UCT, 16 h
b) damp heat, 1st cycle:
55 °C, 93% r. H., 24 h
c) cold, LCT, 2 h
d) damp heat, additional 5 cycles:
55 °C/25 °C, 93% r. H., 24 h/cycle.
Then the specimen shall be stored at
room temperature and normal humidity
for 1 to 2 h.
Thereafter, the change of Vv shall be
measured. Thereafter, insulation resis-
tance Rins shall be measured according
to CECC 42 000, test 4.8 at V = 500 V.
|V/V (1 mA)| 10%
Rins 1M
Fast temperature cycling IEC 60068-2-14, test Na, LCT/UCT,
dwell time 30 min, 5 cycles
|V/V (1 mA)| 5%
No visible damage
Damp heat, steady state The specimen shall be subjected to
40 ±2°C, 90 to 95% r. H. for 56 days
without load / with 10% of the maximum
continuous DC operating voltage VDC.
Then stored at room temperature and
normal humidity for 1 to 2 h.
Thereafter, the change of Vv shall be
measured. Thereafter, insulation resis-
tance Rins shall be measured according
to CECC 42 000, test 4.8 at V = 500 V.
|V/V (1 mA)| 10%
Rins 1M
Solderability IEC 60068-2-20, test Ta,
method 1 with modified conditions for
lead-free solder alloys: 245 °C, 3 s:
After dipping the terminals to a depth
of approximately 3 mm from the body
in a soldering bath of 245 °C for 3 s, the
terminals shall be visually examined.
The inspection shall be
carried out under adequate
light with normal eyesight or
with the assistance of a
magnifier capable of giving
a magnification of 4 to
10 times. The dipped sur-
face shall be covered with
a smooth and bright solder
coating with no more than
small amounts of scattered
imperfections such as
pinholes or un-wetted or
de-wetted areas. These
imperfections shall not be
concentrated in one area.
Reliability data
Test Test methods/conditions Requirement
StandarD series
Leaded varistors
20 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
Note:
UCT = Upper category temperature / LCT = Lower category temperature / Rins = Insulation resistance to CECC 42 000, test 4.8
Resistance to soldering heat IEC 60068-2-20, test Tb, method 1A,
260 °C, 10 s:
Each lead shall be dipped into a solder
bath having a temperature of 260 ±5°C
to a point 2.0 to 2.5 mm from the body of
the specimen, be held there for 10 ±1s
and then be stored at room temperature
and normal humidity for 1 to 2 h.
The change of Vv shall be measured
and the specimen shall be visually
examined.
|V/V (1 mA)| 5%
No visible damage
Tensile strength IEC 60068-2-21, test Ua1
After gradually applying the force
specified below and keeping the unit
fixed for 10 s, the terminal shall be
visually examined for any damage.
Force for wire diameter:
0.6 mm = 10 N
0.8 mm = 10 N
1.0 mm = 20 N
|V/V (1 mA)| 5%
No break of solder joint,
no wire break
Vibration IEC 60068-2, test Fc
Frequency range: 10 55 Hz
Amplitude: 0.75 mm or 98 m/s2
Duration: 6 h (3 · 2 h)
Pulse: sine wave
After repeatedly applying a single
harmonic vibration according to the
table above.
The change of Vv shall be measured
and the specimen shall be visually
examined.
|V/V (1 mA)| 5%
No visible damage
Bump IEC 60068-2-29, test Eb
Pulse duration: 6 ms
Max. acceleration: 400 m/s2
Number of bumps: 4000
Pulse: half sine
|V/V (1 mA)| 5%
No visible damage
Flammability IEC 60695-2-2 (needle flame test)
Severity: vertical 10 s
5s max.
Reliability data
Test Test methods/conditions Requirement
StandarD series
Leaded varistors
21 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
v/i characteristics
v = f (i) – for explanation of the characteristics refer A = Leakage current for worst-case
to “General technical information”, 1.6.3 B = Protection level varistor tolerances
SIOV-S05 …
VAR0458-L
1
A
2
B
4
6
8
10
20
60
80
100
40
200
400
600
800
1000
2000
4000
6000
V
K300 K275
K250 K230
K175
K140
K115
K75
K150
K130
K95
K60
K40
K50 K35
K25
K17
K11
K30
K20
K14
K14
K17
K25 K20
K30
K35
K50 K40
K60K75
K95
K115
K130
K150
K250
K300
K140
K175
K230
K275
A10
5
_
10
4
_
3
10
_
2
10
__
10
1
10
0
10
1
10
2
10
3
K11
v
i
K385
K385
K460
K420 K440
K440K420
K460
StandarD series
Leaded varistors
22 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
v/i characteristics
v = f (i) – for explanation of the characteristics refer A = Leakage current for worst-case
to “General technical information”, 1.6.3 B = Protection level varistor tolerances
SIOV-S07 …
VAR0443-Q
1
A
2
B
4
6
8
20
60
80
100
40
200
400
600
800
1000
2000
4000
6000
V
10010 110210 310A 4
10
K14
K20
K30
K40
K60
K95
K130
K150
K250
K300
K460
K275
K230
K175
K140
K115
K75
K50
K35
K25
K17
K11
K460
K300
K250
K150
K130
K95
K60
K40
K30
K20
K14
K275
K230
K175
K140
K115
K75
K50 K35
K25
K17
K11
5
10
_
4
10
_
10
_
3
_
10 210 1
_
v
i
K385
K385
K420 K440
K420 K440
StandarD series
Leaded varistors
23 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
v/i characteristics
v = f (i) – for explanation of the characteristics refer A = Leakage current for worst-case
to “General technical information”, 1.6.3 B = Protection level varistor tolerances
SIOV-S10 …
VAR0451-H
4
i
A
v
B
6
8
10
20
40
60
80
100
200
400
600
800
1000
2000
4000
6000
V
10000
11
17
25
35
50
14
20
30
40
75
115
140
175
230
275
60
95
130
150
250
300
420
320
385
440
460
510
625 550
680
680
625
510
550
385
420
460 440
320
275
230
175
140
115
300
250
150
130
95
60
40
50
30
20
14
75
35
25
17
11
101010 5
_
4
__
3
_
10 210
_
110010 110210 310A 4
StandarD series
Leaded varistors
24 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
v/i characteristics
v = f (i) – for explanation of the characteristics refer A = Leakage current for worst-case
to “General technical information”, 1.6.3 B = Protection level varistor tolerances
SIOV-S14 …
VAR0459-T
4
i
A
v
10
B
8
6
20
40
60
80
100
200
400
600
800
1000
2000
4000
6000
V
10000
680
550
460
625
510
420
385
440
275
320
230
300
250
150
130
95
60
40
30
20
14
175
140
115
75
50
35
25
17
11
680 625
550
460
510
440
420
385
300
250
150
130
95
60
320
275
230
175
140
115
75
50
35
25
17
11
30
40
20
14
101010
5
_
4
__
3
_
10
2
10
_
1
10
0
10
1
10
2
10
3
10A
4
1000
1000
StandarD series
Leaded varistors
25 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
v/i characteristics
v = f (i) – for explanation of the characteristics refer A = Leakage current for worst-case
to “General technical information”, 1.6.3 B = Protection level varistor tolerances
SIOV-S20 …
VAR0444-Y
4
i
A
vB
6
8
10
20
40
60
80
100
200
400
600
800
1000
2000
4000
6000
V
10000
10010 110210 310 4105
A
11
17
25
35
50
14
20
30
40
75
115
140
175
230
275
320
420
460
550
680
60
95
130
150
250
300
385
440
510
625
1000
1000
680 625
550
460
420
320
275
230
175
140
115
75
50
35
25
17
11
510
440
385
300
250
150
130
95
60
40
30
20
14
_
10 54
_
10 10 3
_
10
_
210 1
_
StandarD series
Leaded varistors
26 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
Derating curves
Maximum surge current imax = f (tr, pulse train)
For explanation of the derating curves refer to “General technical information”, section 1.8.1
SIOV-S05K11 … K40
SIOV-S05K50 … K460
VAR0097-E
55
A
r
t
µs
i
max
10
12
10
3
10
4
105
3
10
10
2
10
1
10
0
5
5
5
5
10
_
2
1x
2
10
10
2
3
10
10
4
5
10 10
6
t
r
max
i
10
_
1
VAR0098-M
55
A
r
t
µs
imax
10 12
10 3
10 4
105
3
10
102
10 1
100
5
5
5
5
10
_
2
1x
2
10
102
3
10 104
5
10
106
tr
max
i
10
_
1
StandarD series
Leaded varistors
27 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
Derating curves
Maximum surge current imax = f (tr, pulse train)
For explanation of the derating curves refer to “General technical information”, section 1.8.1
SIOV-S07K11 … K40
SIOV-S07K50 … K460
VAR0018-Z
55
A
r
t
µs
i
max
10
12
10
3
10
4
105
1x
2
10
10
2
3
10
10
4
5
10
10
6
t
r
max
i
10
_
1
0
10
10
1
2
10
3
10
5
5
5
VAR0099-V
55
A
r
t
µs
i
max
10
12
10
3
10
4
105
4
10
10
3
10
2
10
1
10
0
5
5
5
5
10
_
1
1x
2
10
10
2
3
10
10
4
5
10
10
6
t
r
max
i
StandarD series
Leaded varistors
28 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
Derating curves
Maximum surge current imax = f (tr, pulse train)
For explanation of the derating curves refer to “General technical information”, section 1.8.1
SIOV-S10K11 … K40
SIOV-S10K50 … K320
VAR0100-3
55
A
r
t
µs
imax
10 12
10 3
10 4
105
3
10
102
10 1
100
5
5
5
5
10
_
2
1x
2
10
102
3
10
104
5
10
106
tr
max
i
10
_
1
VAR0101-B
55
A
r
t
µs
imax
10 12
10 3
10 4
105
4
10
103
102
10 1
100
5
5
5
5
10
_
1
1x
2
10
102
3
10
104
5
10
106
tr
max
i
StandarD series
Leaded varistors
29 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
Derating curves
Maximum surge current imax = f (tr, pulse train)
For explanation of the derating curves refer to “General technical information”, section 1.8.1
SIOV-S10K385 … K680
SIOV-S14K11 … K40
VAR0102-J
55
A
r
t
µs
imax
10 12
10 3
10 4
105
4
10
103
102
10 1
100
5
5
5
5
10
_
1
tr
max
i
1x
10
103
105
6
10
104
102
2
VAR0103-S
55
A
r
t
µs
i
max
10
12
10
3
10
4
105
4
10
10
3
10
2
10
1
10
0
5
5
5
5
10
_
1
1x
2
10
10
2
3
10
10
4
5
10
10
6
t
r
max
i
StandarD series
Leaded varistors
30 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
Derating curves
Maximum surge current imax = f (tr, pulse train)
For explanation of the derating curves refer to “General technical information”, section 1.8.1
SIOV-S14K50 … K320
SIOV-S14K385 … K1000
VAR0104-1
55
A
r
t
µs
i
max
10
12
10
3
10
4
105
4
10
10
3
10
2
10
1
10
0
5
5
5
5
10
_
1
1x
2
10
10
2
3
10
10
4
5
10
10
6
t
r
max
i
VAR0105-9
55
A
r
t
µs
imax
10 12
10 3
10 4
105
4
10
103
102
10 1
100
5
5
5
5
10
_
1
1x
2
10
102
3
10
104
5
10
106
tr
max
i
StandarD series
Leaded varistors
31 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
Derating curves
Maximum surge current imax = f (tr, pulse train)
For explanation of the derating curves refer to “General technical information”, section 1.8.1
SIOV-S20K11 … K40
SIOV-S20K50 … K115
VAR0106-H
55
A
r
t
µs
i
max
10
12
10
3
10
4
105
4
10
10
3
10
2
10
1
10
0
5
5
5
5
10
_
1
1x
2
10
10
2
3
10
10
4
5
10
10
6
t
r
max
i
VAR0107-Q
55
A
r
t
µs
i
max
10
12
10
3
10
4
105
4
10
10
3
10
2
10
1
10
0
5
5
5
5
10
_
1
1x
2
10
10
2
3
10
10
4
5
10
10
6
t
r
max
i
StandarD series
Leaded varistors
32 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
Derating curves
Maximum surge current imax = f (tr, pulse train)
For explanation of the derating curves refer to “General technical information”, section 1.8.1
SIOV-S20K130 … K320
SIOV-S20K385 … K460
VAR0168-7
55
A
r
t
µs
i
max
10
12
10
3
10
4
105
4
10
10
3
10
2
10
1
10
0
5
5
5
5
10
_
1
1x
2
10
10
2
3
10
10
4
5
10
10
6
t
r
max
i
VAR0169-F
55
A
r
t
µs
i
max
10
12
10
3
10
4
105
4
10
10
3
10
2
10
1
10
0
5
5
5
5
10
_
1
1x
2
10
10
2
3
10
10
4
5
10
10
6
t
r
max
i
StandarD series
Leaded varistors
33 11/07
Please read Cautions and warnings and
Important notes at the end of this document.
Derating curves
Maximum surge current imax = f (tr, pulse train)
For explanation of the derating curves refer to “General technical information”, section 1.8.1
SIOV-S20K510 … K1000
VAR0108-Y
55
A
r
t
µs
imax
10 12
10 3
10 4
105
4
10
103
102
10 1
100
5
5
5
5
10
_
1
1x
2
10
102
3
10
104
10
106
tr
max
i
5
StandarD series
Leaded varistors
34 11/07
Cautions and warnings
General
1. EPCOS metal oxide varistors (SIOVs) are designed for specific applications and should not be
used for purposes not identified in our specifications, application notes and data books unless
otherwise agreed with EPCOS during the design-in-phase.
2. Ensure suitability of SIOVs through reliability testing during the design-in phase. SIOVs should
be evaluated taking into consideration worst-case conditions.
3. For applications of SIOVs in line-to-ground circuits based on various international and local
standards there are restrictions existing or additional safety measures required.
Storage
1. Store SIOVs only in original packaging. Do not open the package before storage.
2. Storage conditions in original packaging:
Storage temperature: –25 °C … +45 °C
Relative humidity: <75% annual average,
<95% on maximum 30 days a year.
Dew precipitation: Is to be avoided.
3. Avoid contamination of an SIOV’s surface during storage, handling and processing.
4. Avoid storage of SIOVs in harmful environments that can affect the function during long-term
operation (examples given under operation precautions).
5. The SIOV type series should be soldered within the time specified:
SIOV-S, -Q, -LS 24 months
ETFV and SFS types 12 months.
Handling
1. SIOVs must not be dropped.
2. Components must not be touched with bare hands. Gloves are recommended.
3. Avoid contamination of the surface of SIOV electrodes during handling, be careful of the sharp
edge of SIOV electrodes.
Soldering (where applicable)
1. Use rosin-type flux or non-activated flux.
2. Insufficient preheating may cause ceramic cracks.
3. Rapid cooling by dipping in solvent is not recommended.
4. Complete removal of flux is recommended.
Please read Cautions and warnings and
Important notes at the end of this document.
Leaded varistors
StandarD series
35 11/07
Mounting
1. Potting, sealing or adhesive compounds can produce chemical reactions in the SIOV ceramic
that will degrade the component’s electrical characteristics.
2. Overloading SIOVs may result in ruptured packages and expulsion of hot materials. For this rea-
son SIOVs should be physically shielded from adjacent components.
Operation
1. Use SIOVs only within the specified temperature operating range.
2. Use SIOVs only within the specified voltage and current ranges.
3. Environmental conditions must not harm SIOVs. Use SIOVs only in normal atmospheric condi-
tions. Avoid use in the presence of deoxidizing gases (chlorine gas, hydrogen sulfide gas,
ammonia gas, sulfuric acid gas, etc), corrosive agents, humid or salty conditions. Avoid contact
with any liquids and solvents.
Please read Cautions and warnings and
Important notes at the end of this document.
Leaded varistors
StandarD series
36 11/07
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As
a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components
or failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of a passive electronic component could endanger human life or health
(e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of
suitable design of the customer application or other action taken by the customer (e.g.
installation of protective circuitry or redundancy) that no injury or damage is sustained by third
parties in the event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the foregoing
for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, DSSP, MiniBlue, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD,
SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered
or pending in Europe and in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.